Selective area epitaxy of CdTe

We have performed selective area epitaxy (SAE) of CdTe layers grown by molecular beam epitaxy using a shadow mask technique. This technique was chosen over other SAE techniques due to its simplicity and its compatibility with multiple SAE patterning steps. Features as small as 50 microns × 50 microns were obtained with sharp, abrupt side walls and flat mesa tops. Separations between mesas as small as 20 microns were also obtained. Shadowing effects due to the finite thickness of the mask were reduced by placing the CdTe source in a near normal incidence position. Intimate contact between the mask and the substrate was essential in order to achieve good pattern definition.     

Antibacterial effect of phenolic compounds from different wines

The antimicrobial properties of pure phenolic compounds and polyphenols of different wines against pathogens were investigated. It was observed that bacterial species exhibited different sensitivities towards the different concentrations of phenolic compounds. Escherichia coli was the most sensitive bacterium and Flavobacterium sp. was resistant against all phenolic compounds tested. All wine samples showed antimicrobial properties and the inhibition increased when the polyphenols concentration of wines increased. Clarified wines were inactive against all bacteria, indicating that polyphenolic compounds present in red wines, are responsible for the antimicrobial effects observed. The different concentrations of polyphenols in wines could have an important impact on consumers with the consequent increase in wine commercialization.     

Synthesis, structure and fluorescence properties of a highly stable indium(III)-2,5-pyridinedicarboxylate coordination polymer

The hydrothermal reaction of 2,5-pyridinedicarboxylic acid (H₂PDC), diethylene triamine and In(NO₃)₃·4.5H₂O gave rise to a two-dimensional (2D) coordination polymer In(OH)(2,5-PDC). This compound crystallizes in the orthorhombic space group Iba2, with cell parameters, a = 12.656(3) Å, b = 20.114(4) Å, c = 6.2216(1) Å, V = 1583.9(5) Å³ and Z = 8. Its structure contains one-dimensional In–O–In–O– chains, which are further linked by 2,5-PDC ligands into a 2D supramolecular neutral framework. The adjacent 2D layers are parallel with each other and construct a three-dimensional framework via hydrogen bands. At room temperature, the compound exhibits intense photoluminescence. On the basis of the results of TG/DTA analyses, the structure is thermally stable up to 390 °C.     

硅化腐植酸钠GFN-1的研制

针对目前生产腐植酸硅化产品原料受限的缺点,在大量试验的基础上,确定了一条以腐植酸和硅化剂为主要原料的生产工艺,合成了一种与有机硅腐植酸钾(OSAM-K)性能相当的硅化腐植酸钠产品GFN-1,对其常规性能指标和在清水及无固相聚合物钻井液体系中、在膨润土浆和低固相钻井液体系中应用指标,耐温性能进行了对比实验。实验结果表明,GFN-1作为钻井液添加剂,具有良好的降滤失、降黏、耐温及热稳定性,并兼有优良的控制页岩分散能力,其大多数应用性能相当于或略优于OSAM-K,作为替代品完全能够满足油田现场应用的需要。GFN-1的硅化原料性质稳定、来源广泛,生产工艺简单易行,产品质量稳定,具有较好的推广价值。     

Some nitrosoamino acids in bacon adipose tissue and their contribution to the total N-nitroso compound concentration

Zusammenfassung Der Gehalt an Nitrosoaminosäuren und ihr Anteil an den Gesamt-N-Nitrosoverbindungen im Fettgewebe von rohem Schinkenspeck wurde untersucht. In 80% der Proben wurde ein Gehalt an Nitrosoaminosäuren von bis zu 0,2 mg/kg festgestellt. Scheinbare Gesamt-N-Nitrosoverbindungen waren in allen Proben in einer Konzentration von 0,4 bis 3,7 mg (N-NO)/kg vorhanden. Die eigentlichen Nitrosoaminosäuren machen nur etwa 1% der scheinbaren Gesamt-N-Nitrosoverbindungen aus. Die Mehrzahl der scheinbaren Gesamt-N-Nitrosoverbindungen im Fettgewebe findet sich im nichtlöslichen Bindegewebe, wobei der verbleibende Rest chloroformlöslich ist.Summary The levels of nitrosoamino acids and apparent total N-nitroso compounds in the adipose tissue of raw bacon have been examined. Nitrosoamino acids were detected in 80% of the samples in levels of up to 0.2 mg/kg. Apparent total N-nitroso compounds were present in all samples in concentrations of between 0.4 and 3.7 mg (N-NO)/kg. Nitrosoamino acids accounted for approximately only 1 % of the apparent total N-nitroso compounds. The majority of the apparent total N-nitroso compounds in the adipose tissue were associated with the insoluble connective tissue fraction, with the remainder present as chloroform soluble species.

---

Einige Nitrosoaminosäuren im fettgewebe von Schinkenspeck und ihr anteil an der Konzentration der Gesamt-N-Nitrosoverbindungen

     

High performance liquid chromatographic separation of stereoisomeric bile acids as their UV-sensitive esters

High performance liquid chromatographic separation of a series of mono-, di- and trihydroxylated 5β-cholanic acids which differ only in position and configuration of hydroxyl groups at positions C-3, C-7 and/or C-12, is reported. The C-24 free acids were derivatized to four different classes of UV-sensitive esters, i.e.,p-bromophenacyl (BP),m-methoxyphenacyl (MP), 4-nitrophthalimidemethyl (NPM) and 9-anthrylmethyl (AM) esters, and chromatographed on two, variants of C₁₈ reversed-phase columns (Nova-Pak C₁₈ and Zorbax ODS) with methanol-water systems as mobile phase. Separation efficiency and elution order of some isomeric pairs were influenced by both the structure of the C-24 ester groups and the nature of the columns used. Excellent chromatographic properties were found for those derivatives, particularly for the NPM esters.     

Chemometrics in surface spectroscopy

During the past 15 years the advent of laboratory microcomputers has had a dramatic effect on the information we can extract from spectroscopic data. In this paper we take a brief look at the historical development of this field, consider some of the techniques being currently researched, and comment on possible future trends.     

Performance of miniaturized direct methanol fuel cell (DMFC) devices using micropump for fuel delivery

A fuel cell is a device that can convert chemical energy into electricity directly. Among various types of fuel cells, both polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) can work at low temperature (<80 °C). Therefore, they can be used to supply power for commercial portable electronics such as laptop computers, digital cameras, PDAs and cell phones. The focus of this paper is to investigate the performance of a miniaturized DMFC device using a micropump to deliver fuel. The core of this micropump is a piezoelectric ring-type bending actuator and the associated nozzle/diffuser for directing fuel flow. Based on the experimental measurements, it is found that the performance of the fuel cell can be significantly improved if enough fuel flow is induced by the micropump at anode. Three factors may contribute to the performance enhancement including replenishment of methanol, decrease of diffusion resistance and removal of carbon dioxide. In comparison with conventional mini pumps, the size of the piezoelectric micropump is much smaller and the energy consumption is much lower. Thus, it is very viable and effective to use a piezoelectric valveless micropump for fuel delivery in miniaturized DMFC power systems.