汽车组合仪表板控制系统设计

介绍了以PIC16F873单片机为控制核心的汽车组合仪表板控制系统的设计,简述了汽车组合仪表板的基本构成,介绍了汽车组合仪表板控制系统的组成和各部分功能,给出了数据采集处理电路、电源电路等部分硬件电路设计方案,并阐述了一些软件设计算法,如分段插补法和用于平滑指针的软件设计算法等。     

Design,Synthesis, and Biological Evaluation of Novel 6H-Benzo[c]chromen-6-one Derivatives as Potential Phosphodiesterase II Inhibitors

Urolithins (hydroxylated 6H-benzo[c]chromen-6-ones) are the main bioavailable metabolites of ellagic acid (EA), which was shown to be a cognitive enhancer in the treatment of neurodegenerative diseases. As part of this research, a series of alkoxylated 6H-benzo[c]chromen-6-one derivatives were designed and synthesized. Furthermore, their biological activities were evaluated as potential PDE2 inhibitors, and the alkoxylated 6H-benzo[c]chromen-6-one derivative 1f was found to have the optimal inhibitory potential (IC₅₀: 3.67 ± 0.47 μM). It also exhibited comparable activity in comparison to that of BAY 60-7550 in vitro cell level studies.     

Perm-Inspired High-Performance Soy Protein Isolate and Chicken Feather Keratin-Based Wood Adhesive without External Crosslinker

Crosslinking modification can effectively improve the water resistance of soy protein isolate (SPI) adhesive, but it often depends on petroleum-based reagents, violating the concept of green environmental protection. Here, inspired by the breaking and recombination of the disulfide bond in the perm process, a high-performance wood adhesive is prepared by incorporation of SPI (modified by sodium sulfite to cleave the disulfide bonds of protein chains) and feather keratin (FK, extracted from waste chicken feathers by breaking the disulfide bond) without using any other crosslinkers. The crosslinking reaction occurs by disulfide bonds derived from the sulfhydryl group of FK and SPI. Thus the wet shear strength of the SPI/FK-20 adhesive is improved from 0.57 to 1.18 MPa, an increment of 107%. This study provides a green strategy to prepare high-performance protein-based adhesive from the waste products-chicken feathers, which will contribute to the development of the environmentally friendly wood adhesive industry.     

深共熔溶剂-水混合物同步提取红景天苷和酪醇的响应面优化及其分离回收

以深共熔溶剂-水混合物（LAEG40）作为提取溶剂，红景天苷提取率为主要指标，酪醇提取率为辅助指标，在前期单因素实验的基础上，利用响应面法考察了液料比、提取温度、提取时间三个主要因素对红景天中红景天苷和酪醇同步提取的影响。得到的最佳提取条件为: 液料比12.05:1(mL/g)，提取温度60 ℃，提取时间35 min。在此条件下LAEG40对红景天苷的提取率可达到19.3552?0.6604 mg/g，酪醇提取率可达到1.7211?0.0585 mg/g，远高于传统溶剂水、乙醇对红景天苷和酪醇的提取率。为实现LAEG40提取红景天苷和酪醇的回收，进行了大孔树脂吸附分离的研究。经过一系列优化，获得的最佳吸附分离条件为：选用SP-825树脂装柱，每10g树脂上样30 mL LAEG40提取液，洗脱剂选用80 %乙醇，洗脱体积40 mL，洗脱流速1 mL/min，在此条件下红景天苷和酪醇的回收率分别可达60.47 %和85.07 %。     

PS协同Z型异质结2D/BiOI/g-C3N4 光催化降解四环素

以三聚氰胺为前驱体，采用简单的热聚合方法制备了超薄石墨相氮化碳（g-C3N4），并用原位沉积-沉淀法在g-C3N4表面生成碘氧化铋（BiOI），复合构筑不同BiOI质量占比的二维碘氧化铋/石墨相氮化碳（2D/BiOI/g-C3N4，BICN-x）Z型异质结用以协同过二硫酸盐（PS）。通过XRD、FTIR、SEM、HRTEM、BET、UV-vis DRS对光催化剂的结构、表面官能团、形貌特征、比表面积和光学性能进行表征分析。结果表明：BiOI与g-C3N4质量比为2∶1（BICN-3）时，通过密切的界面耦合，光生电子-空穴对分离效率较高，光生e-以更快的迁移速度到达结构表面，并且在LED照射60 min内，BICN-3与PS形成的催化体系（BICN-3/PS）去除了88.2%的四环素（TC，10mg/L），降解速率是单独BICN-3的3.82倍。     

H∞ filtering for discrete-time systems subject to stochastic missing measurements: a decomposition approach

This paper deals with the problem of H_∞ filtering for discrete-time systems with stochastic missing measurements. A new missing measurement model is developed by decomposing the interval of the missing rate into several segments. The probability of the missing rate in each subsegment is governed by its corresponding random variables. We aim to design a linear full-order filter such that the estimation error converges to zero exponentially in the mean square with a less conservatism while the disturbance rejection attenuation is constrained to a given level by means of an H_∞ performance index. Based on Lyapunov theory, the reliable filter parameters are characterised in terms of the feasibility of a set of linear matrix inequalities. Finally, a numerical example is provided to demonstrate the effectiveness and applicability of the proposed design approach.     

含双丙酮丙烯酰胺(DAAM)的水性乳液的制备与性能研究

通过预乳化乳液聚合工艺,合成了含官能团单体双丙酮丙烯酰胺(DAAM)、丙烯酰胺、N-甲基丙烯酰胺(NMA)的自交联丙烯酸酯乳液。实验结果表明,DAAM用量的增加对乳液涂膜的硬度有影响,而涂膜的耐水性随NMA用量增加有显著提高,在DAAM用量为单体含量的2％,NMA用量为单体含量的4％时,涂膜的铅笔划痕硬度达2H,耐水性达96h以上。     

HZSM-5固载苯并噻唑离子液体催化合成烷基糖苷及其动力学

以自制苯并噻唑离子液体([HBth]HSO4)为活性组分，HZSM-5分子筛为载体，通过过量溶剂浸渍法制备了固载型苯并噻唑离子液体催化剂([HBth]HSO4/HZSM-5)并用于催化合成烷基糖苷，通过傅立叶变换红外光谱、N2物理脱附、场发射电子显微镜和X射线衍射对催化剂结构进行表征，结果表明，[HBth]HSO4被成功地引入到HZSM-5载体的表面及孔道内。当催化剂用量为1.5 wt%，反应温度为105℃，醇糖摩尔比n(葡萄糖):n(辛醇)=6:1时，辛基糖苷得率达148.8%（产物质量/葡萄糖的质量?100%）。底物拓展及催化剂稳定性研究结果表明，[HBth]HSO4/HZSM-5对烷基糖苷及其衍生物都具有良好的催化效果，且催化剂能稳定循环使用四次，活性组分流失是催化剂失活的主要原因。通过对烷基糖苷催化合成机理和动力学的研究，确定了动力学方程。     

复合硅酸盐水泥固化含氟污泥的试验研究

采用复合硅酸盐水泥对含氟污泥进行固化处理并制取了不同污泥掺量的水泥标准试块，考察了掺量对试块抗压强度、氟离子浸出量、物相转变和晶体形态的影响。结果表明，当含氟污泥掺量为10％时，试块强度高，氟离子浸出量低，是较为适宜的污泥掺加比例。10％掺量试块28天抗压强度达到22.2 MPa，满足一般垫层、基础、地坪及受力不大的结构强度要求；10％掺量试块在地下水和酸雨作用下的氟离子浸出量分别为0.16 mg/L和0.39 mg/L，远小于危险废物100 mg/L的标准限值，安全性较高；机理研究表明，氟化钙污泥的加入加快了水泥中C3A的水化速度，增加了早期AFt生成量，提高了试块早期强度。     

油酸二聚甘油酯的合成及其柔软保湿纸的测试

以油酸缩水甘油酯和甘油为原料，在固体酸催化剂（活性炭负载硫酸）作用下，通过开环反应制得油酸二聚甘油酯。通过FTIR和1HNMR对产物结构进行表征，并将其用作柔软保湿剂涂覆到面巾纸上对纸张的柔软度、保湿性、抗张强度等性能进行测试。结果表明：油酸二聚甘油酯具有优异的柔软保湿性能，在油酸二聚甘油酯添加量为甘油水溶液质量的0.25%时，面巾纸的柔软度（49 mN）优于市面上有机硅柔软剂改性的面巾纸柔软度（68 mN），这是由于大分子柔软剂能够对纤维表面的缺陷进行修复，从而使纤维表面平整度的提升。且在温度为30 ℃，湿度为60%时，油酸二聚甘油酯型柔软保湿剂涂覆后的面巾纸的保水率（98.2%）也略高于有机硅柔软剂涂覆后的面巾纸的保水率（96.5%）。