Synthesis of two metal-porphyrin frameworks assembled from porphyrin building motifs, 5, 10, 15, 20-tetrapyridylporphyrin and their base catalyzed property

Opening catalytically active sites in metal organic frameworks is an issue of fundamental importance for the development of effective and efficient catalysts. In this work, we first reported two metal metalloporphyrin–organic frameworks (MMPFs) with unoccupied pyridine groups as base catalysts. The reaction of Mn(II) and Co(II) with 5,10,15,20-tetrapyridylporphyrin produces two different metal metalloporphyrin–organic frameworks, {[(MnTPyP)]·H₂O}_n (MMPF-Mn) and [(CoTPyP)]_n (MMPF-Co) (TPyP = 5,10,15,20-tetrapyridylporphyrin) under hydrothermal conditions. These two MMPFs have been fully characterized by single-crystal X-ray diffraction, powder XRD, elemental analysis and thermogravimetry (TG). MMPF-Mn displays a 3D network with a nbo topology, large and open hexagonal channels, MMPF-Co reveals a 1D single zigzag chain architecture. Interestingly, both MMPFs have a high thermal stability and opening basic pyridine group, which have been tested for the base catalyzed Knoevenagel condensation reaction. The catalytic study has demonstrated that MMPF-Mn catalysts having exposed pyridine group within 1D channel displayed an excellent performance for Knoevenagel condensation reaction. When MMPF-Mn was recycled four times, its catalytic activity remained with an inconspicuous decrease. We attribute MMPF-Mn showing a better performance than MMPF-Co to its active sites being aligned in extra-large cavity with an interior diameter of 20 Å.     

Evaluation of microbial toxins,trace elements and sensory properties of a high-theabrownins instant Pu-erh tea produced using Aspergillus tubingensis via submerged fermentation

Theabrownins (TB) are polymeric phenolic compounds associated with the multiple bioactivities of Pu-erh tea, a post-fermented Chinese dark tea. High-TB instant Pu-erh tea was produced via a novel submerged fermentation (SF) using Aspergillus tubingensis and compared with samples produced commercially via the conventional solid-state fermentation (SSF). Viable microorganisms and microbial toxins, especially aflatoxins B₁, G₁, B₂, G₂, cyclopiazonic acid, fumonisins B₁, B₂, B₃ and ochratoxin A, were below the detection limit in all samples. Fewer microbial metabolites were found in SF instant tea compared with the SSF teas. Based on an adult consuming 1 g of instant Pu-erh tea daily, the dietary intake of investigated elements was below the safe limits recommended by various authorities. Tasters viewed the instant tea infusions as very mild, smooth, mellow and full. This suggested that submerged fermentation using A. tubingensis offers a speedy and safe alternative to commercial production of instant Pu-erh tea.     

Effect of Supports and Promoters on the Performance of Ni-Based Catalysts in Ethanol Steam Reforming

Ethanol steam reforming (ESR) is one of the potential processes to convert ethanol into valuable products. Hydrogen produced from ESR is considered as green energy for the future and can be an excellent alternative to fossil fuels with the aim of mitigating the greenhouse gas effect. The ESR process has been well studied, using transition metals as catalysts coupled with both acidic and basic oxides as supports. Among various reported transition metals, Ni is an inexpensive material with activity comparable to that of noble metals, showing promising ethanol conversion and hydrogen yields. Additionally, different promoters and supports were utilized to enhance the hydrogen yield and the catalyst stability. This review summarizes and discusses the influences of the supports and promoters of Ni-based catalysts on the ESR process.     

Prevalence,enumeration, and characterization of Salmonella isolated from aquatic food products from retail markets in China

This study aimed to estimate the extent and level of Salmonella contamination of aquatic food products in China, and to determine serotype, virulotype, and the antimicrobial resistance profiles of recovered Salmonella isolates. Out of 554 samples collected from July 2011 to May 2014, 86 (15.5%) tested positive for Salmonella. The highest contamination rate occurred in oysters (23.1%, 6/26), followed by freshwater fish (18.6%, 43/231), shrimp (13.0%, 13/100), and saltwater fish (12.2%, 24/197). The contamination levels generally corresponded to a most probable number (MPN)/g of 0.3–10, although one sample exceeded 110 MPN/g. Among the 103 isolates, S. Typhimurium, S. Wandsworth, S. Thompson, and S. Derby were the most prevalent serovars. Sixty-eight isolates (66.0%) were resistant to at least one antimicrobial, and 35 (34.0%) were resistant to more than three. High rates of resistance were observed for tetracycline (35.9%), ampicillin (28.2%), nalidixic acid (26.2%), trimethoprim-sulfamethoxazole (25.2%), chloramphenicol (20.4%) and streptomycin (18.4%). Of note, S. Thompson isolates exhibited resistance to multiple extended-spectrum cephalosporins, ciprofloxacin, and other antimicrobials. PCR analysis of 15 virulence genes showed that ssaQ, mgtC, siiD, sopB, and bcfC were present in all 103 isolates, whereas the remaining loci were variably distributed. S. Typhimurium, S. Enteritidis, and S. Weltevreden isolates exhibited a wider range of pathogenicity determinants compared with the other strains. Our study provides a comprehensive surveillance on prevalence of Salmonella in aquatic food products from China and indicates its potential risk to public health. These data are valuable for epidemiological studies, risk management, and public health strategies.     

Effects of ultrasonication on the physicochemical properties of milk fat globules of Bubalus bubalis (water buffalo) under processing conditions: A comparison with shear-homogenization

Ultrasonication has been widely studied in bovine milk but the effects of ultrasound (US) on the buffalo's milk fat globules (MFG) are not well known yet. In this study, buffalo's milk samples were ultrasonicated at 20 kHz and physicochemical properties were assessed under different processing conditions. Shear homogenization was performed with 1188 J/mL energy density for the comparison. Results show that ultrasonication reduced the average volume-weighted mean diameter (D[4,3]) of MFG by 93% and increased the surface area by a factor of 8.5 compared to the native counterparts. The zeta-potential (ZP) of MFG are increased by ultrasonication compared to fresh milk (−26.37 vs. −18.22 mV) indicating better stability. Changing the pH of ultrasonicated milk to the isoelectric pH (pI) reduced the zeta-potential (ZP) by −19.8 mV and increased the (D[4,3]) > 0.4 mm indicating the gelation. The size of milk particles increased up to 76–586 μm and the ZP was reduced by 3.1 mV with the increase of ionic strength from 50 to 200 mM. Heating of milk at 90 °C for 30 min increased D[4,3] in US homogenized milk by 22%. Both ultrasonication and shear-homogenization increased the free saturated fatty acids by 2.75–3 g/100 g fat compared to raw buffalo's milk. Ultrasonication increased the gel hardness by 98% compared and shear-homogenized milks. The results of this study indicate that the ultrasonication reduced the size of buffalo's MFG up to sub-micron level with superior stability while improving (P < 0.05) the gels strength compared to shear-homogenization.Industrial relevanceBuffalo set-yoghurts made with unhomogenized milk exhibit higher syneresis and poor stability upon shear-induced breakdown, which are mainly due to the porous gel structure containing a large number of bigger fat globules. Under the large scale production, buffalo set-yoghurts are often fortified with dairy/non-dairy solids and stabilizers in order to prevent this problem. However, the use of some inexpensive, non-food grade alternatives are also reported in some parts of the world for the cottage or medium level production of buffalo yoghurts. In this work, it was shown that ultrasonication with the energy density of 1188 J/mL can be used to produce buffalo set-yoghurts with superior gel strength and therefore, can be used as an unconventional approach to improve the product quality.     

Effect of dispersion and ion concentration on radio frequency heating

Radio frequency (RF) heating has been applied to process foods due to its unique advantages like volumetric heating. To investigate the interaction between dispersed liquid food and electromagnetic field, four dispersion structures, formed by polypropylene pellets dispersed in the samples, and six solutions with different ion concentrations were analyzed. The Results showed that 4 mm dispersion structure and 0.01 mol/L ion concentration involved in the highest heating rate and made the heating rate increase from 1.23 °C/min to 5.53 °C/min. For materials with different ion concentrations, the maximum heating rate corresponded to the dispersion structure of different sizes. But the dispersion structure would reduce the heating uniformity of the horizontal surface of materials. It suggested that dispersion structure and an proper ion concentration could change the material into a dispersed status, further improve RF heating rate, and ensure the efficiency of sterilization as well as retain the nutrition of foodstuffs.     

Effect of chemical phosphorylation on solubility of buffalo milk proteins

Buffalo milk proteins (casein, co-precipitate or whey protein concentrate) were phosphorylated with phosphorus oxychloride (POCl₃) at three different pH values (5.0, 7.0 and 9.0). The solubilities of phosphorylated milk proteins were examined over the pH range 3.0–9.0 in water and ionic (0.1 m NaCl or 10–70 mm Ca²⁺) systems. The solubilities of buffalo milk proteins decreased at pH 3.0, while there was an increase in the solubilities of casein and co-precipitate near their isoelectric points upon phosphorylation. Solubilities of these phosphorylated milk proteins were pH dependent in 0.1 m NaCl but there was a decrease in their solubilities with increase in calcium ion concentration. This alteration could be due to the shifting of isoionic points of phosphorylated buffalo milk proteins towards acidic pH.     

Simulation of humidity control and greenhouse temperature tracking in a growth chamber using a passive air conditioning unit

In this paper, we define a dynamic discrete model of a passive air conditioning unit, without the more typical compression or absorption-refrigeration cycle. The unit is composed of heat exchangers, a positioning system and humid corrugated pads. The aim of the study was to follow the temperature in a greenhouse and to replicate it with a desired and stable relative humidity in a ventilated growth chamber. A control law, based on a quadratic criterion and dynamic programming, taking output error and energy consumption minimisation into account, was used to control the behaviour of the unit in spite of air intake disturbances. The results of the simulation indicate that the air conditioning unit can produce a variable climate in the growth chamber, with a wide range of relative humidity setpoints.