碾压混凝土坝施工进度与质量控制的新措施

碾压混凝土重力坝和拱坝由于连续施工的坝体混凝土体积大，施工期间需要采取较为严格的温度控制措施，而所采取的温控措施是否有效，目前尚没有一个能够用于实际施工过程的快速有效的评估方法和方式，不能根据已施工坝体内的实际情况来控制施工进度和质量。利用分布式光纤温度测量系统来快速地获得坝体混凝土内部的大量温度信息，进而实际标定温度仿真程序并通过标定过程模拟拟施工的连续碾压层，以检验其温控措施的有效性。通过坝体内部的温度、温度变化速率和梯度来达到实时控制坝体碾压上升速度、坝面和仓面养护、以及冷缝灌浆处理等目的。     

Microbial degradation of di-n butyl phthalate

Microorganisms capable of degrading di-n-butyl phthalate (DBP) were isolated. The characteristics of DBP biodegradation by immobilized and free cells were investigated. The experimental results showed that the rate of DBP degradation of immobilized cells was higher than that of free cells.     

128kb／s电视电话系统中数码率缓存器的控制策略研究

本文探讨了电视电话／会议电视的Ｈ，２６１建议中低码率时（ｐ＝２）数码率缓存器的控制问题，提出一种既有宏观预分配又有微观分割的控制策略（简称ＧＡＬＳ），并用测试图像序列进行了计算机模拟。将本文方法与ＲＭ８中有关策略作了比较，实验结果表明图像的主观质量有所改善。     

NUMERICAL SIMULATION OF STREAMBED HEAT TRANSFER

１．　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｓｉｍｕｌａｔｉｏｎｏｆｓｔｒｅａｍｗａｔｅｒｔｅｍｐｅｒａｔｕｒｅｉｓｓｉｇｎｉｆｉｃａｎｔｌｙｉｍｐｏｒｔａｎｔｆｏｒｔｈｅｓｔｕｄｙｏｆｎｕｍｅｒｉｃａｌｍｏｄｅｌｉｎｇｏｆｒｉｖｅｒｉｃｅｐｒｏｃｅｓｓｅｓ［１］　．Ｈｉｓｔｏｒｉｃａｌｌｙ，ｔｈｅｍａｔｈｅｍａｔｉｃａｌｍｏｄｅｌｉｎｇｏｆｔｈｅｔｒａｎｓｐｏｒｔａｎｄｆａｔｅｏｆｈｅａｔｉｎａｗａｔｅｒｂｏｄｙｈａｓｂｅｅｎｔｈｅｓｕｂｊｅｃｔｏｆｅｘｔｅｎｓｉｖｅｓｔｕｄｙｆｏｒｖａｒｉｏｕｓｒｅ…     

定量电子晶体学硼对Ni3Al的电荷密度分布的影响

阐述了定量电子晶体学测定晶体电荷密度分布的基本原理和方法，不足之处和改善途径。以硼对Ｎｉ３Ａｌ的电荷密度分布的影响为实例，介绍了定量电子晶体学在研究晶体电子结构方面的应用前景。     

氮气氛下LTCC基板Cu共烧金属化研究

从PMMA型LTCC素坯膜的制备和PMMA的排胶机理两方面，研究了LTCC基板Cu共烧金属化。结果表明，采用PMMA作为粘结剂的流延浆料具有剪切变稀行为，所得的流延坯膜微观组织均匀，叠压后坯体内部无分层现象。热失重、差热和傅立叶红外光谱联用分析结果表明高纯N2气氛中PMMA以解聚机理热解，热解后释放的主要产物为丙烯酸甲酯。在高纯N2气氛中LTCC与Cu共烧后Cu金属化膜平整、致密，连通良好。经测试，基板表面Cu导体方阻小于5mΩ/□。     

Experimental investigation of the heat and mass transfer between air and liquid desiccant in a cross-flow regenerator

The regenerator is one of the essential components in a liquid desiccant air-conditioning system, whose efficiency directly influences the system performance. A performance test-bed for a cross-flow regenerator was established in the present analysis. Celdek structured packings were used in the regenerator and LiBr aqueous solution was used as the liquid desiccant. Moisture removal rate and regenerator effectiveness are adopted to describe the mass transfer performance of the regenerator. Effects of air and desiccant inlet parameters on the regenerator performance are experimentally investigated, and performance comparisons between present cross-flow regenerator and other counter-flow configurations available in the literature are also carried out. The comparison results show that the impacts of air and desiccant inlet parameters show similar tendency with those of counter-flow regenerators. A dimensionless mass transfer correlation is proposed, which gives results in good agreement with the experimental findings.     

Optimal determination of warranty region for 2D policy: A customers' perspective

Warranty is treated by the manufacturer as a marketing strategy that creates better customer satisfaction, which finally helps to get hold of a bigger market share. The cost incurred towards this service is termed as warranty cost, which is a function of warranty policy and region, product quality and reliability, and the customers' usage pattern. Under the 2D warranty policy, there exists numerous iso-cost regions for any specified value of warranty cost. In this article, we propose a methodology to determine the optimal region when customers' utility is measured by the length of warranty coverage time. It is believed that the results will help the manufacturer to provide improved customer service.