Poly(l-lactide) comb polymer brushes on the surface of clay layers

Poly(l-lactide) (PLLA) comb polymers on poly(hydroxyethyl methacrylate) (PHEMA) backbone were prepared on the surface of clay layers by a combination of in situ atom transfer radical polymerization (ATRP) and ring-opening polymerization. An ATRP initiator with a quaternary ammonium salt end group was intercalated into the interlayer spacing of clay. PHEMA polymer brushes on the surface of clay layers were prepared by in situ ATRP. PLLA comb polymers on PHEMA backbone were prepared by ring-opening polymerization. X-ray diffraction (XRD) and transmission electron microscopy (TEM) results showed that with the increase of comb chain length more and more exfoliated structure was created. Aggregation of wormlike comb polymer brushes on the surface of clay layers was observed by TEM. Differential scanning calorimeter (DSC) results indicated that both the melting points and glass transition temperatures of the comb polymer brushes increase with the increase of comb chain length. The equilibrium melting temperature of the comb polymer brush on the surface of clay layers is lower than cleaved polymer. An atomic force microscopy (AFM) image proves the formation of wormlike structure by cleaved comb polymers.     

Grafting polymerization of l-lactide on the surface of hydroxyapatite nano-crystals

A novel method of grafting ring-opening polymerization of l-lactide (LLA) onto the surface of hydroxyapatite nano-particles (n-HAP) was developed. PLLA was directly connected onto the HAP surface through a chemical linkage. The PLLA-g-HAP particles could be stably dispersed in organic solvent such as chloroform for several weeks. The n-HAP particles still retained the original dimension and shape after the grafting of PLLA. Compared with the ³¹P MAS-NMR spectrum of pure HAP powders, there appeared a downfield displacement of 1.2 ppm in the spectrum of PLLA-g-HAP. Fourier transformation infrared (FT-IR) spectra further confirmed the existence of PLLA on the surface of PLLA-g-HAP. The amount of grafted polymer determined by thermal gravimetric analysis (TGA) was about 6% in weight. The tensile strength and elongation at break of the PLLA/PLLA-g-HAP composite containing 8 wt% of PLLA-g-HAP were 55 MPa and about 10-13%, respectively, while those of the PLLA/n-HAP composites were 40 MPa and 3-5%, respectively.     

Effect of LiAl5O8 additions on the sintering and optical transparency of LiAlON

LiAl₅O₈ (zeta alumina) was reaction sintered with α-Al₂O₃ and AlN to produce γ-LiAlON. Zeta alumina transforms from a primitive to a face-centered cubic structure above 1290 °C with a lattice parameter similar to γ-AlON. Weight loss measurements combined with XRD suggest solubility of Li in the spinel structure at elevated temperatures. The Vickers hardness, at a 1-kg load, of the pressureless sintered LiAlON was 16.5 ± 0.5 GPa, independent of the grain size or amount of zeta alumina added, for LiAl₅O₈ additions ranging between 0 and 16 wt.%. In-line transmission in the visible and near-IR regions increased with increasing grain size, most likely due to pore coalescence.     

含杂环甲胺基的氰基丙烯酸酯类光合作用抑制剂的合成和活性研究进展

氰基丙烯酸酯是一类PSII电子传递抑制剂,笔者发现在抑制剂分子疏水性基团苯环被吡啶替代能大大提高其抑制活性,对此先导结构进一步优化,设计合成以下系列新化合物:含2-氯(或烷氧基)-5-吡啶甲胺基的氰基丙烯酸酯、含2-氟-5-吡啶甲胺基的氰基丙烯酸酯、含2-氯-5-噻唑甲胺基的氰基丙烯酸酯、氮在吡啶环不同位置的吡啶甲胺基氰基丙烯酸酯、含烷硫基取代的吡啶甲胺基的氰基丙烯酸酯、含二茂铁甲胺基的氰基丙烯酸酯。生测结果表明:这些含杂环甲胺基的氰基丙烯酸酯类化合物对油菜等十字花科类杂草表现出很好的除草活性,且茎叶处理优于土壤处理。     

Two novel 3D 3d–4f polymers with triethylenetetraaminehexaacetic acid: Syntheses,structures, and magnetic properties

Two novel 3d–4f polymers [La(H₂O)₄][M₂TTHA(SCN)₂] · H₃O⁺ (M = Ni(1), Cu(2), H₆ TTHA = triethylenetetraaminehexaacetic acid) were synthesized and characterized by X-ray single-crystal diffraction, elemental analysis, IR and magnetic properties. Two complexes show 3D framework, comprising an unusual infinite 1D chain based on heterometallic La₂M₂ rings (M = Ni(1), Cu(2)).     

Effect of structural and electrochemical properties of different Cr-doped contents of Li[Ni1/3Mn1/3Co1/3]O2

Layered Li[Ni_(1−x)/3Mn_(1−x)/3Co_(1−x)/3Cr_x]O₂ materials with x = 0, 0.01, 0.02, 0.03, 0.05 are prepared by a solid-state pyrolysis method. The oxide compounds were calcined with various Cr-doped contents, which result in greater difference in morphological (shape, particle size and specific surface area) and the electrochemical (first charge profile, reversible capacity and rate capability) differences. The Li[Ni_(1−x)/3Mn_(1−x)/3Co_(1−x)/3Cr_x]O₂ powders were characterized by means of X-ray diffraction (XRD), charge/discharge cycling, cyclic voltammetry, and SEM. XRD experiment revealed that the Li[Ni_(1−x)/3Mn_(1−x)/3Co_(1−x)/3Cr_x]O₂ (x = 0, 0.01, 0.02, 0.03, 0.05) were crystallized to well layered -NaFeO₂ structure. The first specific discharge capacity and coulombic efficiency of the electrode of Cr-doped materials were higher than that of pristine material. When x = 0.02, the sample showed the highest first discharge capacity of 241.9 mAh g⁻¹ at a current density of 30 mA g⁻¹ in the voltage range 2.3–4.6 V, and the Cr-doped samples exhibited higher discharge capacity and better cycleability under medium and high current densities at room temperature.     

天津近岸海域沉积物叶绿素状况分析

于2006—2007年间,分4个季节对天津近岸10,m等深线以内水域进行了沉积物中叶绿素a和脱镁叶绿酸a的调查研究工作,旨在了解该海域的沉积物叶绿素分布情况,为环境评价、生物资源研究提供背景资料.结果表明,沉积物中叶绿素a和脱镁叶绿酸a分布存在站位和季节差异,脱镁叶绿酸a含量一般要高于叶绿素a含量.与已有研究结果比较,本研究海域的叶绿素a含量处于中等水平,而脱镁叶绿酸a含量偏高.     

Wettability and surfactivity of sodium phosphate surfactants in strong alkali solutions

The wettability, surfactivity and the correlation between wettability and surfactivity of sodium diethylhexylphosphate, sodium diethylhexyl polyoxyethylene phosphate and their complex in NaOH solutions were studied. A complex alkali resistant phosphate surfactant with good permeability was prepared. The wettability of surfactants was investigated by measuring the immersion time, sinking time and capillary effects of nature cotton grey fabric in NaOH solutions. The surfactivity of the surfactants was characterized by measuring the surface tension. The effect of the complex on the surface appearance of cotton grey fabric was also investigated with a scanning electron microscope (SEM). The results show that all the surfactants exhibit good wettability for cotton grey fabric in 0.5–5.0 mol/L of NaOH solutions, the complex system exhibits better wettability in 5.0–7.0 mol/L of NaOH solutions, in comparison with either corresponding single surfactant component employed, and wettability is well correlative with the surfactivities of the surfactant. SEM images indicate that the cotton grey fabric is well wetted by the alkaline surfactant solution and the quality of fabric is improved.     

Si基薄膜太阳电池绒面ZGO透明导电膜的研究

采用孪生对靶直流磁控溅射的方法在室温下制备高质量的Ga掺杂ZnO(ZGO)透明导电薄膜,用HCl腐蚀的方法获得满足光散射特性的绒面ZGO薄膜。制备的ZGO样品为具有六角纤锌矿结构的多晶膜,具有(002)方向的择优取向。腐蚀后,绒面ZGO薄膜的晶粒度减小,电阻率基本不变。在可见光范围内,绒面ZGO的反射率比平面ZGO的反射率下降了10%左右。将绒面ZGO薄膜应用于p-i-n型非晶Si薄膜太阳电池中,有效提高了太阳电池性能,使得电池的短路电流提高到17.79 mA/cm2,电池的转换效率增加到7.23%。     

DBR光纤激光器拍频传感及其组网技术研究

研究了基于单纵模分布Bragg反射(DBR)光纤激光器的拍频解调传感技术,并对其组网技术进行了探讨。由于光纤本身的固有双折射,DBR光纤激光器能够产生两种正交偏振模式的激光,而这两种偏振模式的频率差拍会在射频域形成对温度变化极为敏感的拍频(beatfrequency)。实验结果表明:在20～100℃的温度范围内,激光器拍频随温度的增加呈线性减小,其线性拟合度高达0.99981,拍频灵敏度为0.51063MHz/℃。这种偏振式光纤激光器具有高输出功率、高信噪比、低解调成本和窄输出线宽等特点,有助于构建大规模的光纤有源传感网络。参考近年关于光纤传感网络的报道,提出一种有源光纤环形传感网络的构想。