Compiler compatible 5.66 Mb/mm2 8T 1R1W register file in 14 nm FinFET technology

1-read/1-write (1R1W) register file (RF) is a popular memory configuration in modern feature rich SoCs requiring significant amount of embedded memory. A memory compiler is constructed using the 8T RF bitcell spanning a range of instances from 32 b to 72 Kb. An 8T low-leakage bitcell of 0.106 μm² is used in a 14 nm FinFET technology with a 70 nm contacted gate pitch for high-density (HD) two-port (TP) RF memory compiler which achieves 5.66 Mb/mm² array density for a 72 Kb array which is the highest reported density in 14 nm FinFET technology. The density improvement is achieved by using techniques such as leaf-cell optimization (eliminating transistors), better architectural planning, top level connectivity through leaf-cell abutment and minimizing the number of unique leaf-cells. These techniques are fully compatible with memory compiler usage over the required span. Leakage power is minimized by using power-switches without degrading the density mentioned above. Self-induced supply voltage collapse technique is applied for write and a four stack static keeper is used for read Vmin improvement. Fabricated test chips using 14 nm process have demonstrated 2.33 GHz performance at 1.1 V/25 °C operation. Overall V_min of 550 mV is achieved with this design at 25 °C. The inbuilt power-switch improves leakage power by 12x in simulation. Approximately 8% die area of a leading 14 nm SoC in commercialization is occupied by these compiled RF instances.     

贺兰山西麓中生代构造反转及意义

通过对小松山断裂特征的再分析和对顺层断层特征的观察研究发现,发育于贺兰山北段西麓的小松山“推覆”构造实际上是一个滑覆构造。该区于晚侏罗世之后发生大规模构造反转,贺兰山沉积特征及玄武岩环境指示该区是一大陆裂谷斜坡,在中生代早中期并不存在大规模的东西向挤压应力环境。滑覆面之下的三叠系—中上侏罗统的褶皱变形及顺层剪切是这种滑覆引起的局部构造变形,与鄂尔多斯地块西部发育的典型的东西向逆冲形成明显对比,值得重视。      

国外MCM及其主要制造技术的发展现状

MCM具有胜过PCB、LSI和一般HIC的诸多优点,正在逢勃发展,可望成为九十年代的代表性技术。本文从市场和技术两个方面评述MCM的发展潜力,重点介绍近年来国外MCM主要制造技术的现状及发展态势,试图引起人们对它的关注。     

复合乳化沥青的粘附性试验方法研究

鉴于目前使用的阳离子乳化沥青粘附性试验方法难以有效评价复合乳化沥青粘附性，通过试验研究并综合考虑乳化沥青施工和路用实际情况，提出了乳化沥青水煮法试验方法和采用该方法检验复合乳化沥青粘附性时的评定标准。     

An updated correlation for crack-arrest fracture toughness for nuclear reactor pressure vessel steels

An updated and statistically-rigorous correlation is provided for crack-arrest toughness values versus normalized temperature for light-water nuclear reactor pressure vessel (RPV) steels. The database used in this effort is larger than applied heretofore and includes results from tests of laboratory-size specimens and from tests of large-scale specimens, which contain features prototypical of operating RPVs. The mathematical methodology used is based on a lognormal distribution, with its parameters calculated by orthogonal distance regression. This correlation was developed as one of several items updated for use in the US Nuclear Regulatory Commission's extensive program to evaluate and potentially revise its rule for ensuring structural integrity of operating RPVs when subjected to pressurized thermal-shock transients.     

玻璃两面重叠手印拍摄机理

根据斯涅尔定律和菲涅尔公式阐述清水衬底法消除玻璃下界面手印或玻纹的影像，以及用偏振光，紫外线拍摄玻面痕迹的方法和机理。     

局域网的网络安全浅析

随着计算机网络和互联网的发展,局域网安全问题越来越受到人们的重视和关注。为了使局域网的安全措施能全方位地应对各种不同的威胁,确保网络信息的保密性、完整性和可用性。同时为了确保信息的安全与畅通,文中对局域网的安全以及防范措施进行了研究。     

LTE下行MIMO模式自适应切换算法

由于用户在各种不同场景下采用不同的MIMO模式可以达到不同的传输效果,为了使用户达到平均吞吐量和频谱效率的最佳要求,提高系统传输率,研究了TDD LTE系统下行MIMO模式切换技术。搭建TDD LTE下行业务控制信道PDSCH仿真平台,对MIMO传输模式进行仿真实验,通过比较不同模式下的误码率和吞吐量的仿真结果,确定切换门限,提出MIMO模式自适应切换算法。在实际应用中,根据这种算法自适应地配置适合的MIMO技术,可以最大限度的提高系统频谱利用率,此方法优于单独采用一种MIMO技术达到的传输效率。     

Design and implementation of a new tuned hybrid intelligent model to predict the uniaxial compressive strength of the rock using SFS-ANFIS

This study proposes a novel design to systematically optimize the parameters for the adaptive neuro-fuzzy inference system (ANFIS) model using stochastic fractal search (SFS) algorithm. To affirm the efficiency of the proposed SFS-ANFIS model, the predicting results were compared with ANFIS and three hybrid methodologies based on ANFIS combined with genetic algorithm (GA), differential evolution (DE), and particle swarm optimization (PSO). Accurate prediction of uniaxial compressive strength (UCS) is of great significance for all geotechnical projects such as tunnels and dams. Hence, this study proposes the use of SFS-ANFIS, GA-ANFIS, DE-ANFIS, PSO-ANFIS, and ANFIS models to predict UCS. In this regard, the fresh water tunnel of Pahang–Selangor located in Malaysia was considered and the requirement data samples were collected. Different statistical metrics such as coefficient of determination (R²) and mean absolute error were used to evaluate the models. Referring to the efficiency results of SFS-ANFIS, it can be found that the SFS-ANFIS (with the R² of 0.981) has higher ability than PSO-ANFIS, DE-ANFIS, GA-ANFIS, and ANFIS models in predicting the UCS.

     

基于Multipath的煤矿巷道三维模型构建方法

针对现有煤矿巷道三维模型存在灵活性和可移植性差、数据更新维护困难等问题,提出了一种基于Multipath的煤矿巷道三维模型构建方法。该方法通过定义点弧拓扑数据模型,将煤矿CAD格式数据转换为Geodatabase中的要素类,利用开发的ArcGIS Engine程序、通过插入节点坐标生成巷道三维模型,实现了煤矿巷道自动建模,有效减少了巷道三维建模的工作量。