Sanitary legislation governing Food Services in Brazil

The Technical Regulation of Good Practices for Brazilian Food Services (Regulamento Técnico de Boas Práticas para Serviços de Alimentação do Brasil) can be complemented by sanitary surveillance agencies at the state, district and municipal levels by tailoring it to location-specific requirements. The purpose of the present study was to survey sanitary legislation governing Brazilian Food Services. During the period from November 2011 to November 2012, a survey was conducted with the sanitary surveillance agencies from the various states, capitals and the Federal District. A previously prepared and tested tool was used for data collection, comprising 10 questions. Only 10 (19.2%) of the sanitary codes had been established prior to RDC Resolution n° 216/2004 and were not complementary. Of the legislation cited as complementary, only the states of Santa Catarina, Rio Grande do Sul and São Paulo and the capital of the state of São Paulo truly presented additional and location-specific aspects. No legislation that was specific to hospital kitchens was found. The majority of participating coordination, including the Evaluation List for Good Practices in Food Services, was also verified; however, it had not been published. In conclusion, a gap in sanitary surveillance services exists, which was caused by the lack of location-specific food service regulations.     

基于2007-2013年COSMIC掩星数据的电离层振幅闪烁研究

利用2007-2013年的COSMIC掩星数据，分析了E区与F区电离层闪烁的变化特征.发现用闪烁出现频次、闪烁发生率以及闪烁强度来表征的电离层闪烁出现规律比较相似.E区电离层闪烁在夏季半球的中纬地区最强，其次是春秋季的低纬地区和冬季半球.就经度分布来说，春秋季E区电离层闪烁呈四波结构.对F区电离层闪烁来说:南美-大西洋扇区在12月至点最为显著；非洲和太平洋扇区在6月至点最为显著；大西洋扇区在春秋分季最为显著.极区也出现中等强度的闪烁，尤其在南半球的90°E~180°E扇区较为显著.高纬E区电离层闪烁强度随太阳活动的增强而增强，而低纬和南半球的中纬E区闪烁随太阳活动的增强而减弱.高纬和低纬F区闪烁随太阳活动的增强而增强，而中纬F区电离层闪烁对太阳活动无显著依赖关系.对于赤道区来说，北半球60°W~60°E经度区闪烁强度随太阳活动的变化最为显著，其次是南半球60°E~210°E附近；而对于高纬地区来说，F区闪烁强度随太阳活动的变化最为显著的区域在南半球60°E~210°E附近.     

Efficient tri-wavelength actively Q-switched Yb:GAGG laser

An efficient acousto-optic Q-switched Yb-doped Gd₃Al_xGa_5−xO₁₂ (GAGG) (x = 0.5) laser is demonstrated. Under the absorbed pump power of 7.4 W, the maximum average output power of 1.4 W is obtained at the pulse repletion rate of 1 kHz , with the slope efficiency as high as 32%. The pulse width of 40 ns is achieved with the pulse energy and peak power of 1.4 mJ and 35 kW, respectively. What’ more, the output spectrum shows itself tri-wavelength in either CW or Q-switching mode. To our knowledge, this is the first time for realizing simultaneous tri-wavelength Yb:GAGG laser actively Q-switched operation.     

Mechanical properties of graphene films enhanced by homo-telechelic functionalized polymer fillers via π–π stacking interactions

Most researches on graphene/polymer composites are focusing on improving the mechanical and electrical properties of polymers at low graphene content instead of paying attention to constructing graphene’s macroscopic structures. In current study the homo-telechelic functionalized polyethylene glycols (FPEGs) were tailored with π-orbital-rich groups (namely phenyl, pyrene and di-pyrene) via esterification reactions, which enhanced the interaction between polyethylene glycol (PEG) molecules and chemical reduced graphene oxide (RGO) sheets. The π–π stacking interactions between graphene sheets and π-orbital-rich groups endowed the composite films with enhanced tensile strength and tunable electrical conductivity. The formation of graphene network structure mediated by the FPEGs fillers via π–π stacking non-covalent interactions should account for the experimental results. The experimental investigations were also complemented with theoretical calculation using a density functional theory. Atomic force microscope (AFM), scanning electron microscope (SEM), X-ray diffraction (XRD), nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), UV–vis and fluorescence spectroscopy were used to monitor the step-wise preparation of graphene composite films.     

Selective oxidation of glycerol over nitrogen-doped carbon nanotubes supported platinum catalyst in base-free solution

In this communication, N-doped multiwall carbon nanotube (N-MWCNT) supported Pt NPs (1.8 nm) were prepared via a facile routine under microwave irradiation and tested in the selective oxidation of glycerol in an aqueous base-free solution. Characterizations confirmed that N-MWCNTs could improve the dispersion of Pt through strengthened metal-support interactions and donate its electron to metallic Pt. This electron-enriched Pt NPs on the surface of N-MWCNTs is active and stable for the selective oxidation of glycerol.     

Piezo-phototronic effect enhanced polarization-sensitive photodetectors based on cation-mixed organic–inorganic perovskite nanowires

Piezo-phototronic effect has been extensively investigated for the third generation semiconductor nanowires. Here, we present a demonstration that piezo-phototronic effect can even be applied to tune polarization-sensitive photodetectors based on cation-mixed organic–inorganic perovskite nanowires. A big anisotropic photoluminescence (PL) with linearly polarized light-excitation was found due to a strong spontaneous piezoelectric polarization besides the anisotropic crystal structure and morphology. The piezo-phototronic effect was utilized to tune the PL intensity, and an improved anisotropic PL ratio from 9.36 to 10.21 for linearly polarized light-excitation was obtained thanks to the modulation by piezo-potential. And a circularly polarization-sensitive PL characterized with circular dichroism ratio was also discovered, which was found to be modulated from 0.085 to 0.555 (with a 5.5-fold improvement) within the range of applied strain. The circular dichroism was resulted from the joint effects of the modulated Rashba spin–orbit coupling and the asymmetric carriers separation and recombination for right- and left-handed helicity due to the presence of effective piezo-potential. These findings not only reveal the promising optoelectronic applications of piezo-phototronic effect in perovskite-based polarization-sensitive photodetectors, but also illuminate fundamental understandings of their polarization properties of perovskite nanowires.     

YSZ/MoS2 self-lubricating coating fabricated by thermal spraying and hydrothermal reaction

Thermal sprayed ceramic coatings have extensively been used in components to protect them against friction and wear. However, the poor lubricating ability severely limits their application. Herein, yttria-stabilized zirconia (YSZ)/MoS₂ composite coatings were successfully fabricated on steel substrate with the combination of thermal spraying technology and hydrothermal reaction. Results show that the synthetic MoS₂ powders are composed of numbers of ultra-thin sheets (about 7 ~ 8?nm), and the sheet has obvious lamellar structure. After vacuum impregnation and hydrothermal reaction, numbers of MoS₂ powders, look like flowers, generate inside the plasma sprayed YSZ coating. Moreover, the growing point of the MoS₂ flower is the intrinsic micro-pores of YSZ coating. The friction and wear tests under high vacuum environment indicate that the composite coating has an extremely long lifetime (>?100,000 cycles) and possesses a low friction coefficient less than 0.1, which is lower by about 0.15 times than that of YSZ coating. Meanwhile, the composite shows an extremely low wear rate (2.30?×?10^?7 mm³ N^?1 m^?1) and causes slight wear damage to the counterpart. The excellent lubricant and wear-resistant ability are attributed to the formation of MoS₂ transfer films and the ultra-smooth of the worn surfaces of hybrid coatings.     

A distributed energy system integrating SOFC-MGT with mid-and-low temperature solar thermochemical hydrogen fuel production

Solar thermochemical hydrogen production with energy level upgraded from solar thermal to chemical energy shows great potential. By integrating mid-and-low temperature solar thermochemistry and solid oxide fuel cells, in this paper, a new distributed energy system combining power, cooling, and heating is proposed and analyzed from thermodynamic, energy and exergy viewpoints. Different from the high temperature solar thermochemistry (above 1073.15 K), the mid-and-low temperature solar thermochemistry utilizes concentrated solar thermal (473.15–573.15 K) to drive methanol decomposition reaction, reducing irreversible heat collection loss. The produced hydrogen-rich fuel is converted into power through solid oxide fuel cells and micro gas turbines successively, realizing the cascaded utilization of fuel and solar energy. Numerical simulation is conducted to investigate the system thermodynamic performances under design and off-design conditions. Promising results reveal that solar-to-hydrogen and net solar-to-electricity efficiencies reach 66.26% and 40.93%, respectively. With the solar thermochemical conversion and hydrogen-rich fuel cascade utilization, the system exergy and overall energy efficiencies reach 59.76% and 80.74%, respectively. This research may provide a pathway for efficient hydrogen-rich fuel production and power generation.     

Effect of microbial hydrogen consumption on the hydrogen permeation behaviour of AISI 4135 steel under cathodic protection

The feasibility of microbial hydrogen consumption to mitigate the hydrogen embrittlement (HE) under different cathodic potentials was evaluated using the Devanathan-Stachurski electrochemical test and the hydrogen permeation efficiency η. The hydrogen permeation efficiency η in the presence of strain GA-1 was lower than that in sterile medium. The cathodic potential inhibited the adherence of strain GA-1 to AISI 4135 steel surface, thereby reducing the hydrogen consumption of strain GA-1. The adherent GA-1 cells were capable of consuming ‘cathodic hydrogen’ and reducing the proportions of absorbed hydrogen, indicating that it is theoretically possible to control HE by hydrogen-consuming microbes.