退火温度对掺杂钼板性能的影响

本文简述了退火温度对掺杂钼板的室温抗拉性能、弯曲塑－脆转变温度及室浊反复弯曲性能影响。试样经１３００℃真空退火－小时后，其室温抗拉强度为５８５ＭＰａ，伸长率为３１％，弯曲塑－脆转转变温度低于－７８℃，室浊进反复弯曲９０度的次２１次；经１８００℃退火后，其室温抗拉强度为４９５ＭＰａ，伸长率为４８％，弯曲塑－脆转变温度为４０℃，室温时反复弯曲９０度的次数为６次。     

钒氮微合金化热轧带肋钢筋径向组织分布特征

通过用金相、扫描电镜等方法观察得出,钒氮微合金化热轧带肋钢筋肋部主要由细小的铁素体晶粒、片层较细的珠光体和少量离异珠光体组成;其基体组织是沿钢筋纵向呈明显条带状分布的铁素体和珠光体。同时,定量测量了铁素体条带密度、铁素体晶粒尺寸、珠光体体积分数及其片层间距沿径向的分布情况,并分析了铁素体晶粒尺寸和珠光体体积分数在芯部反常分布的原因。     

Study on the flash butt welding of 400 MPa ultra-fine grain steel

A 400 MPa ultra-fine grain steel possesses high strength and toughness. Due to its fine grain size, the heat affect zone (HAZ) of the weld joint will soften during welding. The weldability of 400 MPa ultra-fine reinforced steel bar of flash butt welding is investigated by using the micro metallographical examination and macro-mechanical-property tests. The joint of flash butt welding has a superior mechanical property. The HAZ in the weld joint does not show apparent softening. There is only a localized softening spot inside the weld seam, which does not affect the property of the whole joint. Therefore, flash butt welding is appropriate for joining the 400 MPa ultra-fine grain reinforced steel bars. The resulting weld joint has excellent mechanical properties.     

PBX炸药细观损伤的实验研究

为研究PBX炸药在冲击作用下的物理损伤、化学损伤及成热的物理机制,采用炸药爆炸驱动隔板实验技术对PBX炸药进行了冲击压缩实验,回收炸药试样并对其不同位置处的断面形貌进行SEM分析.结果表明,随着冲击能量的增加,其温度效应的影响越来越显著,损伤模式从物理损伤向化学损伤过渡.这为XDT问题中的"热点"形成机制等研究提供了实验基础.     

Fabrication of polymer derived ceramic parts by selective laser curing

Polymer derived ceramic parts of complex shape were fabricated by selective laser curing (SLC). The ceramic parts were built similar to the selective laser sintering process by sequentially irradiating layers consisting of SiC loaded polysiloxane powder with a CO₂-laser beam (λ = 10.6 μm), which locally induces curing reaction of the polymer phase at moderate temperatures around 400 °C. The laser-cured bodies were converted to SiOC/SiC ceramic parts in a subsequent pyrolysis treatment at 1200 °C in argon atmosphere. The scanning speed and the power of the CO₂-laser beam were varied, leading to pronounced differences in material properties. Laser irradiating a powder mixture containing 50 vol.% polymer/50 vol.% SiC resulted in relative green densities between 38 and 60%. Relative densities decreased to 32–50% after pyrolysis due to the polymer shrinkage. A post-infiltration with liquid silicon was carried out in order to produce dense parts. While before infiltration the bending strength only attained 17 MPa as a result of both microcracks in the SiOC matrix and a pronounced porosity, an average value of 220 MPa was achieved after post-infiltrating with Si. In the case of 50 vol.% SiC content the linear shrinkage after pyrolysis was only 3%. Thus, the SLC approach can be considered as a near-net-shape forming process of ceramic components with complex geometries.     

用于提高谷歌图像搜索结果的二分类器在线学习方法

对于基于关键词的图像检索,利用检索结果的视觉相似性学习二分类器有望成为改善检索结果的最有效途径之一. 为改善搜索引擎的搜索结果,本文提出一种算法框架并且基于此框架着重研究训练数据选择这一关键问题. 训练数据选择过程由两个阶段组成:1）训练数据初始化以开始分类器学习过程;2）分类器迭代学习过程中的动态数据选择. 对于初始训练数据的选择,我们探讨了基于聚类和基于排序两种方法,并且对比了自动训练数据选择与人工标注的结果. 对于动态数据选择,我们比较了支持向量机和基于最大最小后验伪概率的贝叶斯分类器的分类效果. 组合上述两个阶段的不同方法,我们得到了8种不同的算法,并将其用于谷歌搜索引擎进行基于关键词的图像检索. 实验结果证明,如何从含有噪声的搜索结果中选择训练数据是搜索结果改善的关键问题. 实验显示我们的方法能够有效的改善谷歌搜索的结果,尤其是排序在前的结果. 尽早为用户提供更相关的结果能够更大程度的减少用户逐个翻页查看结果的工作. 另外,如何使自动训练数据选择与人工标注媲美仍是需要继续研究的一个问题.     

盐酸丁咯地尔合成研究

盐酸丁咯地尔是治疗脑部及末梢血管障碍的血管扩张药,本文介绍并评价了盐酸丁咯地尔的几个合成路线.     

基于GF_1卫星的丹江口水库水面面积-蓄水量-水位相关性研究

基于GF_1卫星16m分辨率多光谱遥感数据及水文观测数据,通过计算NDWI水体指数来提取丹江口水库水面面积,并研究水面面积、水位与蓄水量三者之间的相关性,实现动态分析水库蓄水量变化情况,以期为"南水北调"提供决策支撑。研究发现:(1)南水北调中线首个调度年前后丹江口水库水面面积-水位,水位-蓄水量以及水面面积-蓄水量之间均为显著相关关系,且三对变量依次呈现明显的1次、2次、3次曲线关系,拟合曲线方程的决定系数分别达到0.976、0.999和0.980,因此可以根据其中一个已知变量预测其他两个未知量;(2)水面面积自2014年10月5日至2016年5月5日最大变化幅度相差180km~2,是影响周边环境变化的重要因素;(3)同时蓄水量在首个调度年内,于2014年11月初达到最大值204.10亿m~3,可调水量在16.53~78.93亿m~3范围内浮动,且年内整体变化平缓稳定,保证了2015调度年内南水北调中线工程的供水需求。     

脂肪族聚酯熔点的预估——对D．W．Vankrevelen经验公式的修正

对D．W．Vankrevelen经验公式进行了修正,并对脂肪族聚酯的熔点进行了计算。结果表明,修正后的公式比原公式准确性星著提高,可对脂肪族聚酯熔点进行预估。     

Position Unmanned Aerial Vehicles in the Mobile Ad Hoc Network

This paper considers the problem of employing multiple unmanned aerial vehicles (UAVs) to the mobile ad hoc network (MANET) as relay backbone nodes to construct the backbone network, to improve the network connectivity, and to address many issues in the MANET such as linkage, capacity, load balance, and reliability. With considering the dynamic nature of the problem, this study provides several linear location problem models and their extensions to accommodate these issues. Due to the size of linear location models associated with a large number of constraints, the problem becomes computational challenging even with modest size of nodes. To overcome the computational barrier, we recast these location problem models using a quadratic unconstrained binary optimization (QUBO) framework and solve these QUBO models with a Tabu search heuristic with preprocessing. The analysis of the solutions that are produced by QUBO together with the comparisons made with the linear model highlight both the attractiveness and robustness of the proposed approach. The results of this study provide support to future advanced routing protocol development.