Effect of microbial hydrogen consumption on the hydrogen permeation behaviour of AISI 4135 steel under cathodic protection

The feasibility of microbial hydrogen consumption to mitigate the hydrogen embrittlement (HE) under different cathodic potentials was evaluated using the Devanathan-Stachurski electrochemical test and the hydrogen permeation efficiency η. The hydrogen permeation efficiency η in the presence of strain GA-1 was lower than that in sterile medium. The cathodic potential inhibited the adherence of strain GA-1 to AISI 4135 steel surface, thereby reducing the hydrogen consumption of strain GA-1. The adherent GA-1 cells were capable of consuming ‘cathodic hydrogen’ and reducing the proportions of absorbed hydrogen, indicating that it is theoretically possible to control HE by hydrogen-consuming microbes.     

低剂量抑制剂Inhibex501存在下的甲烷水合物相平衡研究

含动力学抑制剂的天然气水合物相平衡研究对新型低剂量抑制剂的开发具有指导作用。在283.6 ~ 290.9 K和7.51 MPa ~ 15.97 MPa的温压范围内研究了抑制剂Inhibex501及其溶剂2-乙二醇单丁醚对甲烷水合物相平衡条件的影响。实验结果显示，0.5wt%和2.0wt%浓度的Inhibex501对甲烷水合物形成的热力学条件具有促进作用，能使甲烷水合物形成移向更高的温度或者更低的压力，而2-乙二醇单丁醚在浓度0.2wt% ~ 1.0wt%范围几乎不改变甲烷水合物形成的热力学条件，N-乙烯基己内酰胺与N-乙烯基吡咯烷酮的共聚物对水合物形成热力学条件的改变起主要作用。     

Solvent-free synthesis of C9 and C10 branched alkanes with furfural and 3-pentanone from lignocellulose

Jet fuel range branched alkanes were first synthesized under solvent-free conditions by the aldol condensation of furfural and 3-pentanone from lignocellulose followed by the one-step hydrodeoxygenation (HDO). Among the investigated solid base catalysts, CaO and KF/Al₂O₃ demonstrated the highest activity for the aldol condensation reaction of furfural and 3-pentanone. The aldol condensation product of furfural and 3-pentanone (liquid at room temperature) was directly hydrodeoxygenated to 4-methyl-nonane and 4-methyl-octane. These alkanes have low freezing points (174.1 K and 159.8 K) and can be blended into jet fuel without hydroisomerization. Among the investigated HDO catalysts, the Ni-Cu/SiO₂ exhibited the best performance.     

深层及非生物成烃的催化机制

讨论了非生物成因烃的可能生成机制。通过对比分析,探讨了在地质条件下碳、氢经历费-托合成和由过渡金属催化产生烃的可能机制。     

岩石圈深部温度压力条件下褐煤与水的热模拟研究

在压力高达1—3GPa、温度为400—700℃的条件下，在密闭体系中进行了褐煤加水的模拟实验。分析了实验产物中液态烃的变化规律，并讨论了压力、温度及恒温时间对有机质演化的影响。实验结果表明，热模拟液态产物氯仿沥青“A”的有机碳含量为0．91％-2．55％，2GPa条件下其高峰值后移至700℃，说明高压抑制了液态烃的生成，同时压力升高有利于有机质降解产物的环化、聚合和芳构化。在400—600℃条件下，温度升高或恒温时间增长，OEP和Pr／Ph值均减小；而在700℃的恒温条件下，压力增高，OEP和Pr／Ph值均增大。说明有机质的成熟度与温度和加热时间成正相关，而压力增加抑制了有机质的成熟演化。在高压条件下，芳烃演化的主要趋势是甲基化作用，压力升高有利于甲基化反应和甲基重排。     

北部湾盆地福山凹陷CO2气成因探讨

北部湾盆地福山凹陷油气钻探中发现了高含CO₂气的天然气气藏。对CO₂气稳定碳同位素、伴生稀有气体氦和氩同位素进行了分析研究，结果显示，福山凹陷CO₂气稳定碳同位素偏重，(13C_CO2为-5.01～-10.08‰，绝大多数样品大于-7.0‰，为无机成因CO₂气特征；伴生稀有气体氦同位素³He/⁴He值为(4.74~5.03)×10^-6，R/Ra值为3.38～3.59；伴生稀有气体氩同位素⁴⁰Ar/³⁶Ar值为1881～2190，也显示出幔源或壳幔混合CO₂气的特征。综合判定认为，福山凹陷CO₂为壳幔混合成因。始新统流沙港组岩浆岩体分布特征与CO₂气藏分布范围基本一致，也表明幔源-岩浆可能是福山凹陷CO₂气的主要来源。与南海北部边缘盆地其它地区如珠江口盆地西部、琼东南盆地东部CO₂气成因一致，都为幔源-岩浆来源，或壳幔混合来源。     

Fabrication and frequency response of a complex ultrasonic transducer for multilayer evaluation

To characterize the thickness of a corrosive fluid system's coated facilities, such as pipes, tubes, tanks, and structural members, a complex ultrasonic transducer capable of measuring multilayered parts was fabricated and the time and frequency responses were evaluated. The target transducer was constructed with two active dual elements made from tape-cast PbNb₂O₆ sheets and an additional thin-film active element made from sol–gel spin-coated Pb(Zr_0.52Ti_0.48)O₃ films. After adjusting the properties of each active element, a complex transducer was assembled after matching the impedance of each element and considering the minimal interference between the active layers. The impulse response of the assembled complex transducer shows excellent characteristics. Moreover, the assembled transducer's capability of accurately measuring the thickness assures that it can be directly applied to related industries.     

等离子体刻蚀工艺控制模型分析

讨论了主因素分析法以及神经网络法在等离子体刻蚀工艺中的应用.结果表明主元素分析法可以实现对数据的压缩,而神经网络算法则显示出比传统的统计过程控制算法更好的准确性.     

胜坨油田浅水浊积相储集层流动单元研究

胜坨油田沙二段1砂层组2小层是浅水浊积相储集层，综合考虑岩性、物性、电性及非均质性和水淹特征，采用模糊聚类的方法将其分为4类流动单元。流动单元E以中砂岩为主，处在沉积旋回下部，分布于浊流中心相，基本没有无水开采期，高含水期含水上升减缓，非均质性弱，纵向剩余油分布差别小；流动单元G以细砂岩为主，处于沉积旋回中下部，分布于浊流中心相边部及边缘相内侧，非均质性最弱，水淹较均匀，高含水期仍有可观的可动剩余油；流动单元M以细砂岩、粉砂岩为主，处于沉积旋回中上部，分布于浊流边缘相的外侧，非均质性较强，是剩余油较富集的部位；流动单元P以夹泥质粉砂岩、粉砂质泥岩的细、粉砂岩为主，处于沉积旋回的顶部及底部，分布浊流相与湖相的交界部位，非均质性强，极容易形成剩余油，但剩余油总量不大且较难开发，经济价值不大。把流动单元研究与剩余油研究结合起来，可以为提高油气采收率提供可行的地质依据。     

岩石物理横波速度曲线计算技术

横波速度是地震勘探中的重要参数。针对实际生产中缺乏横波速度测井曲线资料，利用经验公式计算精确度不高的问题，通过对横波速度计算理论模型的研究分析，选择Blot-Gassman模型法，利用岩石矿物成分、流体成分、孔隙度及密度等测井曲线进行横波速度测井曲线的计算，并对横波速度计算技术和流程进行研究。在实际工区进行了横波速度曲线计算，计算结果与实测横波吻合程度较高，误差小于10％，该技术在储层和流体识别预测的应用中取得了较好效果。