The thermal behavior of mechanically activated galena by thermogravimetry analysis

The thermal decompositions of mechanically activated and nonactivated galenas were studied by thermogravimetry analysis (TGA) at the heating rate of 10 K min⁻¹ in argon. Results indicate that the initial temperature of thermal decomposition (abbreviated as T _di) in the TGA curves for different galenas decreases gradually with increased grinding time. The specific granulometric surface area (S _G), the structural disorder, and the content of elemental sulfur of mechanically activated galenas were analyzed by an X-ray diffraction (XRD) laser particle-size analyzer, XRD analysis, and the gravimetric method, respectively, which shows that the specific granulometric surface area of mechanically activated galenas remains almost constant after a certain grinding time, but the lattice distortions (ε) rise, the crystallite sizes (D) decrease, and the elemental sulfur contents of mechanically activated galenas increase with increased grinding time. The results imply that the decrease of the initial temperature of thermal decomposition in the TGA curves for mechanically activated galenas is mainly caused by the increase of lattice distortions, and the formation of new dangling bonds resulted from the production of elemental sulfur of mechanically activated galenas with increased grinding time. Finally, the differences in the thermal-decomposition reactivity between nonactivated and mechanically activated galenas were also discussed.     

Elution of copper from vermiculite with environmentally benign reagents

For the purpose of remediation of soils polluted by heavy metals, the use of some strong synthetic chelating agents such as ethylenediaminetetraacetic acid (EDTA) has been proposed. However, EDTA would not be considered as the preferential choice for the remediation of soil polluted with heavy metals like copper because of its nonbiodegradability and permanent residence in the natural environment. In the present work, some novel environmentally benign chelating agents, glucosamine hydrochloride, chito-oligosaccharide and -asparaginic-N,N-diacetic acid (ASDA) were screened to find alternatives to EDTA by investigating the elution of copper from vermiculite with these reagents and comparing their effectiveness with EDTA. The effects of suspension contact time, reagent concentration and equilibrium pH of the solution on the removal of copper were examined. A stoichiometric amount of EDTA can quantitatively remove copper in both acidic and neutral conditions. Chito-oligosaccharide was a slightly less-effective reagent under acidic conditions compared to EDTA, and an amount well in excess of stoichiometry is required to achieve the maximum removal of copper from vermiculite. Glucosamine hydrochloride shows a relatively weak ability for the liberation of copper. The elution behavior of ASDA was equivalent to EDTA in acidic and neutral media. It was concluded that ASDA is the best substitute for EDTA because of its similar high complexing ability and superior biodegradability.     

A quintic polynomial differential system with eleven limit cycles at the infinity

In this article, a recursion formula for computing the singular point quantities of the infinity in a class of quintic polynomial systems is given. The first eleven singular point quantities are computed with the computer algebra system Mathematica. The conditions for the infinity to be a center are derived as well. Finally, a system that allows the appearance of eleven limit cycles in a small enough neighborhood of the infinity is constructed.     

Effect of charge trapping species of cupric ions on the photocatalytic oxidation of resorcinol

The photocatalytic oxidation of resorcinol, a potent endocrine disrupting chemical, in oxygenated aqueous suspensions of pure and cupric ions modified Degussa P25 titanium dioxide has been investigated at pH 3.0 ± 0.5. The initial rate of photocatalytic oxidation of resorcinol increased until an optimum dissolved cupric ions concentration was reached at 1.04 mM. At the optimum concentration of cupric ions, the initial rate of photocatalytic mineralisation and degradation of resorcinol was improved by 400%. The observed beneficial effect of cupric ions on the initial rate of resorcinol oxidation could be attributed to the formation of complex and its participation in the photoredox cyclic reaction.Two of the initial oxidation intermediates detected were 1,2,3-trihydroxybenzene and 1,2,4-trihydroxybenzene. These intermediates were formed via hydroxylation of the aromatic ring of resorcinol. Evidences have revealed that 1,2,4-trihydroxybenzene interacted strongly with cupric ions forming copper(II)-trihydroxybenzoate complexes that possessed good adsorption onto TiO₂ surface. These dual-effects help to draw the metal ions closer to the photocatalyst surface and subsequently trigger the electron trapping mechanism by cupric ions. As a result, this improved the charge carriers’ separation. Furthermore, in the presence of oxygen, reoxidation of photoreduced cupric ions occurred and this eliminated the possibility of copper photodeposition, while inducing a photoredox cyclic reaction to regenerate copper species that may potentially act as co-catalyst for the oxidation of 1,2,4-trihydroxybenzene. In contrast, no obvious complex formation was seen between 1,2,3-trihydroxybenzene and cupric ions. This pointed to an intriguing finding which indicates that the positioning of functional group on benzene ring influences the role of cupric ions.     

Investigation on compounding and application of C80-C100 high-performance concrete

This paper presents the compounding technology and application of C80-C100 high-performance concrete (HPC) containing ultra-pulverized fly ash composite (PFAC) and superplasticizer. The properties of C80-C100 HPC are also studied systematically. The experimental results indicate that this concrete has excellent workability, high strength, lower drying shrinkage, outstanding volume stability, durability, etc.     

Evidence of late palaeozoic thermalwater metallization in South Yongmei Depression

This paper discusses the seafloor thermalwater spout sedimentary activity in South Yongmei Depression according to the following evidences: the Yongmei region was in an extended tectonic environment of metaplateform and locally developed intracontinental rift aulacogen in company with the activity of rich alkali, high potassium volcanics of double-peak type. Several kinds of hydrothermal sedimentary rocks and the ore-bearing sedimentary formations of copper-polymetals, iron and manganese exist in this region with a zoning feature of the seafloor thermalwater spout sedimentation. Project supported by the Science Foundation of NECC for Returns Synopsis of the first author Wu Chengjian, associated professor, born in 1957, majoring in ore deposit and mineralgraphy.     

Bisensors for amino acids

Two kinds of biosensors for amino acids (one with nonspecific enzyme as bioelement, the other with specific enzyme(s) as bioelement), including their principles, applications, recent researches and future trends were discussed in detail. 61 references were given. A part of work for gaining Ph. D in chemical and biochemical application at FPMs (Mons, Belgique) Synopsis of the first author Xia Jinlan, Male, born in 1963, now at Facult’e Polytechnique de Mons, Belgique     

基于图像灰度统计分布的高炉温度场动态定标算法

通过高炉红外图像建立料面温度场是判断高炉煤气流分布形态的一种有效方法,温度定标是建立温度场的基本问题之一.在高炉复杂、恶劣的环境下,本文以高炉十字测温为基础,通过热电偶温度数据和图像对应区域的灰度分布统计,动态地建立温度定标关系.算法具有较好的自适应性,实际生产运行表明,温度定标关系较好地适应了高炉炉况的不确定性,准确地反映了高炉温度场的变化情况.