Accommodation and convergence in integral imaging 3D display

In this paper, we analyze the visual fatigue of integral imaging three‐dimensional (3D) display by studying the accommodation and convergence when viewing the integral imaging 3D images. The theoretical analyses show that there is no inconsistency between the accommodation and convergence distances, which means that the integral imaging 3D display has no visual fatigue. Experiments are implemented, and the results finally demonstrate the rationality of the theoretical analyses. These analyses can be quite beneficial for researchers to better understand the performances and promote the practical applications of the integral imaging 3D display.     

Visual experience for autostereoscopic 3D projection display

In order to investigate visual experience for watching the autostereoscopic three‐dimensional (3D) projection display, we conduct a subjective evaluation experiment by a questionnaire when viewing video clips. Factor analysis is adopted to classify the evaluation items for the perpetual constructs of visual experience. Then a mixed design with repeated measurement analysis of variance with dimension and display duration as factors is carried out on the evaluation data to check the factorial effects and interactions for statistical significance. The results of factor analysis extract five factors including visual comfort, image quality, distortion, naturalness, and presence, which can be used as comprehensive indicators to evaluate the autostereoscopic 3D projection display. The results of analysis of variance indicate that image quality, which is used to assess two‐dimensional contents, is no longer applicable. It is necessary to give consideration to depth when evaluating 3D visual experience. Although 3D scenes enhance the overall subjective performance such as naturalness and presence, the health issues and stereoscopic distortion related to the introduction of depth cannot be ignored.     

Structure and properties of collagen‐konjac glucomannan‐sodium alginate blend films

A new kind of blend film was made by mixing the solutions of collagen, konjac glucommnnan (KGM), and sodium alginate. The structure of the blend film was characterized by FTIR, XRD, atomic absorption spectrophotometer, and SEM, respectively. The effects of weight ratio between the polymers on light transmittance, tensile strength, elongation at break, water permeability, and water absorption of the film were studied. The results showed that there were strong interactions and good compatibility between collagen, KGM, and sodium alginate in the film. The film possesses good mechanical properties. Therefore, it can be applied in biomedicine as a new type of biomaterial. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

PVC/SBS/MBS三元共混体系的力学性能及光学透明性研究

采用冲击实验、拉伸实验、超景深三维显微镜、扫描电镜和分光光度计等手段，对PVC／SBS／MBS三元共混体系的冲击强度、拉伸强度、形态结构以及光学透明性等进行了研究。实验结果表明，MBS能有效改善PVC／SBS共混体系的界面相容性。当SBS和MBS的总量不变时，随着MBS相对含量的增加，共混体系的缺口冲击强度逐渐增加，透光率在m（MBS）／m（SBS）=28／80时达到最大值，光学透明性能最好。     

Epitaxy growth and directed crystallization of high-density polyethylene in the oriented blends with isotactic polypropylene

Various lamellar orientations of high-density polyethylene (HDPE), due to competition between bulk nucleation and interfacial nucleation, have been realized in its melt drawn blends with isotactic polypropylene (iPP) upon cooling after subjected to 160 °C for 30 min. Directed crystallization, with heterogeneous nucleation in the bulk (within domains), is defined as lamellar growth along boundary of anisotropic domains and is favored in larger domains at higher temperature (slow cooling), since overgrowth of lamellae can feel the interface rather than impingement with neighbor ones as a result of scare nuclei at higher temperature. Moreover, lamellar growth caused by directed crystallization is dependent of dimension of confinement. Due to 2D confinement of cylindrical domains, lamellae can only grow along the axis of cylinder and thus b-axis orientation is formed. While in the layered domains with 1D confinement, however, lamellae grow with the normal of (110) plane along the melt drawn direction. On the other hand, epitaxial growth of HDPE chains onto iPP lamellae is related to the surface-induced crystallization and dominated by the interfacial nucleation. Only interfacial nucleation is preferred can epitaxial growth occur. Therefore, retarded crystallization, realized by either strong confinement in finer domains or rapid cooling or both, is favorable for it.     

Low-temperature catalytic combustion of methane over MnO x –CeO2 mixed oxide catalysts: Effect of preparation method

The effect of preparation method on MnO _x –CeO₂ mixed oxide catalysts for methane combustion at low temperature was investigated by means of BET, XRD, XPS, H₂-TPR techniques and methane oxidation reaction. The catalysts were prepared by the conventional coprecipitation, plasma and modified coprecipitation methods, respectively. It was found that the catalyst prepared by modified coprecipitation was the most active, over which methane conversion reached 90% at a temperature as low as 390 °C. The XRD results showed the preparation methods had no effect on the solid solution structure of MnO _x –CeO₂ catalysts. More Mn⁴⁺ and richer lattice oxygen were found on the surface of the modified coprecipitation prepared catalyst with the help of XPS analysis, and its reduction and BET surface area were remarkably promoted. These factors could be responsible for its higher activity for methane combustion at low temperature.     

木粉／低密度聚乙烯复合材料的发泡研究

用模压法制备木粉／低密度聚乙烯发泡材料。通过差示量热扫描分析,考察了纯偶氮二甲酰胺(AC)及与 ZnO共混物、纯NaHCO3及与柠檬酸(L)共混物的热分解特性,探讨了发泡剂AC、NaHCO3、柠檬酸、交联剂过氧化二异丙苯等对材料力学性能的影响,并在扫描电镜下观察了材料断面的微观形态。结果表明:采用放热发泡剂和复合发泡剂都能使复合材料密度下降20％左右,发泡后材料的冲击性能为发泡前体系的1．5倍左右;复合发泡剂的发泡效果优于单放热发泡剂的效果。     

Ultrahigh molecular weight polyethylene/polypropylene/organo‐montmorillonite nanocomposites: Phase morphology,rheological, and mechanical properties

Phase morphology, rheological, and mechanical properties of ultrahigh molecular weight polyethylene (UHMWPE)/PP/organo‐montmorillonite nanocomposites were investigated in this work. The results of TEM and XRD indicated that the organo‐montmorillonite PMM prepared with the complex intercalator [2‐methacryloyloxyethyldodecyldimethylammonium bromide/poly(ethylene glycol)] were exfoliated and dispersed into UHMWPE matrix, and the synergistic effect of the complex intercalator on the exfoliation and intercalation for montmorillonite occurred. Besides, the presence of PMM in UHMWPE matrix was found able to lead to a significant reduction of melt viscosity and enhancement in tensile strength and elongation at break of UHMWPE, except that izod‐notched impact strength was without much obvious change. The dispersed PMM particles exhibited a comparatively large two‐dimensional aspect ratio (L_clay/d_clay = 35.5), which played an important role in determining the enhancement of mechanical properties of UHMWPE nanocomposites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

江河水污垢对小管径恒壁温管内对流换热影响

为有效提高江河水冷热源的利用率,应用热力学第一、第二定律和湍流流动理论,讨论和分析了污垢对恒壁温小管径管内对流换热过程热力学性能的影响。分析结果表明,有污垢存在时,污垢层导热引起的熵产在管内对流传热熵产中占主要部分,而温差传热引起的熵产则相对较小,且在雷诺数较大,管径较小的流动中,会出现粘性流动引起的熵产大于温差传热引起的熵产;随雷诺数的增大和污垢热阻的产生,熵增率都是单调增加的。因此在利用江河水发展水源热泵时,要充分考虑污垢热阻对换热器性能的影响,尤其是污垢层导热热阻的影响。     

某水电站拱坝施工期温度仿真分析

拱坝施工期的温控防裂研究是设计和施工期需要特别关注的问题之一.采用三维有限单元法对某水电站拱坝碾压混凝土坝段和常态混凝土坝段的施工期温度场进行仿真分析.计算结果表明,薄层浇筑的层面散热效果好,层厚超过3 m后效果不明显;不同季节的层面散热效果差异较大,浇筑气温越低,层面散热效果越好;常态混凝土溢流坝段自由冷却时间较长,须采取坝体二期冷却措施,以保证按期进行接缝灌浆.