The relationship between centrality and land use patterns: Empirical evidence from five Chinese metropolises

The relationship between location and land use patterns is one of the classic theoretical issues in urban studies. Classic models based on the monocentricity hypothesis have limitations in the interpretation of modern urban structure. China has experienced institutional transformation in recent decades, and the interaction of national government policy, market forces and the natural environment has influenced urban planning in Chinese metropolises, resulting in urban structures with special characteristics. This paper examines the distribution of location and land use intensity, and tested the Alonso model by the relationship between them in five Chinese metropolises using Point of Interest data, space syntax methodology, the grid weighted statistical method and the Geographically Weighted Regression (GWR) model. Universal patterns about the scaling relation between intensity of land use types and the centrality of location are revealed. The elasticity of land use types to location, from high to low sensitivity, is commercial, residential then industrial land in most of the five metropolises studied. The sensitivity sequence of land use studied suggests that the hypothetical model based on the classical Alonso model can explain the spatial structure of modern metropolises in China to some extent, especially for the commercial land. But the order of sensitivity of residential land and industrial land to location does not conform to the model. The spatial heterogeneity in land use intensity and centrality were explored and the factors embedded were discussed. It can be found that the relation between centrality and land use intensity conforms to power law. In most of the metropolises studied, when the scaling relation between land use intensity and centrality is super linear, the sequence of the frequency value from high to low are commercial, residential and industrial land; when the scaling relation is sublinear, the sequence of the frequency value is industrial, residential and commercial land.     

Rip currents near coastal structures in Lake Michigan: Characterization and assessment for warnings

Rip currents near coastal structures commonly occur in Lake Michigan in the Great Lakes region of the United States. Lack of timely warning due to undocumented characteristics of rip currents and no assessment tool can contribute to tragic drownings incidents. In this paper, we characterized rip current occurrences near breakwater structures and developed an assessment tool for providing timely rip current warnings to beachgoers at the study site, City of Port Washington, WI. Characteristics of rip currents near the structure were observed from field measurements or visual images. Deflection rip currents had speeds of ～ 0.2 m/s and lasted for several hours. The rip current occurrences were associated with environmental proxies. It was found that rip currents can occur even when the water appears calm near the structure. A Structure Rip Checklist and Assessment Matrix (SRiCAM) with a four-tiered risk was developed and validated using observations. Furthermore, the SRiCAM was integrated into cyberinfrastructure with a data contingency plan to provide real-time warnings to the public. The applicability of the SRiCAM to other locations across Lake Michigan was further tested and results are promising. Overall, the SRiCAM has the potential to be widely extended to foster recreational water safety and resilience to rip current hazards in the Great Lakes.     

Hydrogen from wet air and sunlight in a tandem photoelectrochemical cell

A solid-state photoelectrochemical (SSPEC) cell is an attractive approach for solar water splitting, especially when it comes to monolithic device design. In a SSPEC cell the electrodes distance is minimized, while the use of polymer-based membranes alleviates the need for liquid electrolytes, and at the same time they can separate the anode from the cathode. In this work, we have made and tested, firstly, a SSPEC cell with a Pt/C electrocatalyst as the cathode electrode, under purely gaseous conditions. The anode was supplied with air of 80% relative humidity (RH) and the cathode with argon. Secondly, we replaced the Pt/C cathode with a photocathode consisting of 2D photocatalytic g-C₃N₄, which was placed in tandem with the photoanode (tandem-SSPEC). The tandem configuration showed a three-fold enhancement in the obtained photovoltage and a steady-state photocurrent density. The mechanism of operation is discussed in view of recent advances in surface proton conduction in absorbed water layers. The presented SSPEC cell is based on earth-abundant materials and provides a way towards systems of artificial photosynthesis, especially for areas where water sources are scarce and electrical grid infrastructure is limited or nonexistent. The only requirements to make hydrogen are humidity and sunlight.     

Improving the multi-objective evolutionary optimization algorithm for hydropower reservoir operations in the California Oroville–Thermalito complex

This study demonstrates the application of an improved Evolutionary optimization Algorithm (EA), titled Multi-Objective Complex Evolution Global Optimization Method with Principal Component Analysis and Crowding Distance Operator (MOSPD), for the hydropower reservoir operation of the Oroville–Thermalito Complex (OTC) – a crucial head-water resource for the California State Water Project (SWP). In the OTC's water-hydropower joint management study, the nonlinearity of hydropower generation and the reservoir's water elevation–storage relationship are explicitly formulated by polynomial function in order to closely match realistic situations and reduce linearization approximation errors. Comparison among different curve-fitting methods is conducted to understand the impact of the simplification of reservoir topography. In the optimization algorithm development, techniques of crowding distance and principal component analysis are implemented to improve the diversity and convergence of the optimal solutions towards and along the Pareto optimal set in the objective space. A comparative evaluation among the new algorithm MOSPD, the original Multi-Objective Complex Evolution Global Optimization Method (MOCOM), the Multi-Objective Differential Evolution method (MODE), the Multi-Objective Genetic Algorithm (MOGA), the Multi-Objective Simulated Annealing approach (MOSA), and the Multi-Objective Particle Swarm Optimization scheme (MOPSO) is conducted using the benchmark functions. The results show that best the MOSPD algorithm demonstrated the best and most consistent performance when compared with other algorithms on the test problems. The newly developed algorithm (MOSPD) is further applied to the OTC reservoir releasing problem during the snow melting season in 1998 (wet year), 2000 (normal year) and 2001 (dry year), in which the more spreading and converged non-dominated solutions of MOSPD provide decision makers with better operational alternatives for effectively and efficiently managing the OTC reservoirs in response to the different climates, especially drought, which has become more and more severe and frequent in California.     

Se doped nickel-molybdenum bimetal sulfide with enhanced electrochemical activity for hydrogen evolution reaction

In this work, we synthesized Se doped MoS₂@Ni₃S₂ with nanosheets coated nanorods structure supported on Ni foam (MoNiSeS). Firstly, MoS₂@Ni₃S₂ (MoNiS) nanorods was synthesized by hydrothermal method. After selenization treatment, MoSe₂ successfully formed on the edge of MoS₂ nanosheets and particle Ni₃S₂ transformed into NiSe, in which MoSe₂ and NiSe acted as new phase in MoNiSeS. The obtained MoNiSeS only needs a low overpotential of 68 mV to reach the current density of 10 mA cm^?2, and has a low Tafel plots of 72.77 mV dec^?1 and good electrochemical durability, whose electrochemical activity is much better than that of MoNiS and NiSeS, implying the introduction of Mo and Se is beneficial to improve the electrocatalytic performance of NiS for HER. In addition, the proper amount of Mo source, which has an effect on the morphology of product, has also been investigated. For MoNiSeS, the typical nanosheets coated nanarods expose more active sites and the synergic effects is good to the improvement of the catalytic activity. Meanwhile, WNiSeS has also been prepared using the same method and the corresponding results show that the electrochemical activity of WNiSeS is much better than that of NiSeS, proving the universality of this strategy.     

Postural strategy identification during drilling task for different materials and heights: Ergonomic risk assessment

Drilling is an activity carried out in both professional and domestic environments. In this context, knowing the postural strategies used by users is a challenge. The objective of this study is twofold: 1) to identify the different possible strategies for performing a piercing while characterizing them through quantitative biomechanical parameters related to the task; 2) to propose an evaluation of the ergonomic risks incurred by the users for each of the observed strategies. Thus, fourteen subjects carried out a drilling activity at two different heights and for two types of materials. The position of the gravity center projection in relation to the sustentation polygon as well as the angle between the axis connecting the two feet and the antero-posterior axis (drilling axis) were used to identify the different postural strategies. Three strategies respectively called “Inter-feet”, “Left foot” and “External strategy” and three sub-strategies were identified. Each has been characterized through the duration and the average and maximum forces applied during the drilling phase. Two of them, 0–30° and 30–60° Inter-feet strategies covered about 75% of the trials. Despite the presence of a lower score for the 30–60° and 60–90° External strategies, the ergonomic analysis through the Rapid Upper Limb Assessment revealed that regardless of the strategy used, the postures adopted presented risks of developing musculoskeletal disorders. Thus, the drilling activity must be considered with care.Relevance to industryThe identification and characterization of postural strategies is particularly interesting to better understand the organization of the drilling task and thus optimize productivity while ensuring operator safety.     

A size-dependent thermodynamic model for coke crystallites: The carbon–hydrogen system up to 2500 K

The development is presented of a model of the thermodynamic functions of enthalpy, entropy and Gibbs energy for the elements carbon and hydrogen in coke crystallites. It is applicable to varying degrees of graphitization, described by the crystallite length L_a and the crystallite height L_c. The model parameters are derived from known properties such as bond enthalpies and entropies of formation. Good agreement has been obtained between the predicted thermal dehydrogenation of petroleum cokes and experimental data. The removal of hydrogen from idealized coke crystallites is predicted to occur mostly between 1100 and 1300 K. Agreement has also been found in the comparison of the predicted thermodynamic stability of coke relative to graphite, in a previous experimental study. This stability has been determined as at ≈900 J g⁻¹ at temperatures between 950 and 1250 K and for L_a = 10 nm. The current predictive capacity of the present model is valid for temperatures up to 2500 K.     

A novel Zn6Co3 cluster-based heterometallic coordination polymer with PMG3 − linker formed via in situ decarboxylation from H4PMIDA

A novel Zn₆Co₃ cluster-based heterometallic coordination polymer, [Zn₆Co₃(PMG)₆(H₂O)₄]·12H₂O (1), has been hydrothermally synthesized, in which the PMG^3 − (N-(phosphonomethyl)glycinate) as a multifunctional ligand was firstly formed via in situ decarboxylation from original ligand N-(phosphonomethyl)imino-diacetic acid during the hydrothermal reaction. The complex was characterized by elemental analysis, FT-IR, powder X-ray diffraction, thermal analysis and single-crystal X-ray diffraction techniques. Its structure features a 2D framework constructed by [Zn₆Co₃(PMG)₆(H₂O)₄] pinwheel-like heteronuclear clusters, which contains rings with two tropisms. Through extensive O–H⋯O hydrogen bondings, the adjacent 2D layered structure further extends into a 3D supramolecular network. Moreover, the solid-state fluorescence property of this complex has also been investigated at room temperature, which exhibits a good fluorescent emission.     

Reply to the discussion by Q. Zeng and S.L. Xu of the paper “Numerical simulation of moisture transport in concrete based on a pore size distribution model”

This paper presents a reply to the discussion of the paper “Numerical simulation of moisture transport in concrete based on a pore size distribution model” by Q. Zeng and S.L. Xu.     

Enhancing cation exchange capacity of chars through ozonation

The use of ozone to increase the cation exchange capacity (CEC) of two chars produced from pyrolysis of Douglas fir (Pseudotsuga menziessii) and a control bituminous coal activated carbon (AC) is reported. Chars were produced from the wood fraction of Douglas fir (DFWC) and the bark (DFBC) at 500 °C using an auger driven reactor with a nitrogen sweep gas under mild vacuum. Five ozone treatment times, ranging from 5 min to 60 min, were investigated. The initial properties of each char were found to differ significantly from the other samples in terms of surface area, proximate composition, and elemental composition. DFWC did not show significant mass loss or temperature variation during ozone treatment; however, after 1 h of oxidation both DFBC and AC samples resulted in 20% and 30% mass loss, respectively, and reactor temperatures in excess of 60 °C. Analysis of the pore size distribution of each treatment shows that ozone treatment did not significantly affect small micropores after 30 min of treatment for any material, but did reduce the apparent surface area of mesopores. Increases in carboxylic groups were identified with ozone treatment and found to correlate strongly with changes in measured CEC. The formation of lactone was found to correlate positively with reactor temperature during oxidation. These results indicate that the properties of chars, including surface area, pore structure, and chemical composition, as well as reactor conditions strongly affect the ozone oxidation of chars.