An additive manufacturing-based approach for carbon fiber reinforced polymer recycling

The vast Carbon Fiber Reinforced Polymer (CFRP) waste accumulated is pressing for its recycling. A novel recycling approach, which integrated carbon fiber reclamation and composite additive manufacturing, is proposed to process the CFRP waste into three Dimensional (3D) parts. In the experiments, the CFRP waste was recycled by supercritical n-butanol to yield reclaimed Carbon Fibers (rCFs). The rCFs were ground by a ball mill, mixed with Poly-Ether-Ether-Ketone (PEEK) powder and then extruded to the composite filament. The filament was fed to the Fused Deposition Modeling (FDM) printer to fabricate 3D parts. Mechanical and electrical properties of the parts were investigated and compared with that of pure PEEK. The results illustrate that the additive manufacturing-based approach offers a potential strategy to reuse the CFRP waste and rapidly fabricate the rCF reinforced plastics with complex geometry and function.     

Synergistic flame retardant effects of activated carbon and molybdenum oxide in poly(vinyl chloride)

The synergistic effects of activated carbon (AC) and molybdenum oxide (MoO₃) in improving the flame retardancy of poly(vinyl chloride) (PVC) were investigated. The effects of AC, MoO₃ and their mixture with a mass ratio of 1:1 on the flame retardancy and smoke suppression properties of PVC were studied using the limiting oxygen index and cone calorimeter tests. It was found that the flame retardancy of the relatively cheaper AC was slightly weaker than that of MoO₃. In addition, the incorporation of AC and MoO₃ greatly reduced the total heat release and improved smoke suppressant property of PVC composites. When the total content of AC and MoO₃ was 10 phr, PVC/AC/MoO₃ had the lowest peak heat release rate and peak smoke production rate values of 173.80 kW m^?2 and 0.1472 m² s^?1, which represented reductions of 47.3 and 59.9%, respectively, compared with those of PVC. Furthermore, thermogravimetric analysis and gel content tests were used to analyze the flame retardant mechanism of AC and MoO₃, with results showing that AC could promote early crosslinking in PVC. Char residue left after heating at 500 °C was analyzed using scanning electron microscopy and Raman spectroscopy, and the results showed that MoO₃ produced the most compact char, with the smallest and most organized carbonaceous microstructures. © 2017 Society of Chemical Industry     

A size-dependent thermodynamic model for coke crystallites: The carbon–hydrogen system up to 2500 K

The development is presented of a model of the thermodynamic functions of enthalpy, entropy and Gibbs energy for the elements carbon and hydrogen in coke crystallites. It is applicable to varying degrees of graphitization, described by the crystallite length L_a and the crystallite height L_c. The model parameters are derived from known properties such as bond enthalpies and entropies of formation. Good agreement has been obtained between the predicted thermal dehydrogenation of petroleum cokes and experimental data. The removal of hydrogen from idealized coke crystallites is predicted to occur mostly between 1100 and 1300 K. Agreement has also been found in the comparison of the predicted thermodynamic stability of coke relative to graphite, in a previous experimental study. This stability has been determined as at ≈900 J g⁻¹ at temperatures between 950 and 1250 K and for L_a = 10 nm. The current predictive capacity of the present model is valid for temperatures up to 2500 K.     

Mechanical properties of graphene films enhanced by homo-telechelic functionalized polymer fillers via π–π stacking interactions

Most researches on graphene/polymer composites are focusing on improving the mechanical and electrical properties of polymers at low graphene content instead of paying attention to constructing graphene’s macroscopic structures. In current study the homo-telechelic functionalized polyethylene glycols (FPEGs) were tailored with π-orbital-rich groups (namely phenyl, pyrene and di-pyrene) via esterification reactions, which enhanced the interaction between polyethylene glycol (PEG) molecules and chemical reduced graphene oxide (RGO) sheets. The π–π stacking interactions between graphene sheets and π-orbital-rich groups endowed the composite films with enhanced tensile strength and tunable electrical conductivity. The formation of graphene network structure mediated by the FPEGs fillers via π–π stacking non-covalent interactions should account for the experimental results. The experimental investigations were also complemented with theoretical calculation using a density functional theory. Atomic force microscope (AFM), scanning electron microscope (SEM), X-ray diffraction (XRD), nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), UV–vis and fluorescence spectroscopy were used to monitor the step-wise preparation of graphene composite films.     

Flexural behaviour of RC slabs strengthened with prestressed CFRP strips using different anchorage systems

The Externally Bonded Reinforcement (EBR) technique using Carbon Fiber-Reinforced Polymers (CFRP) has been commonly used to strengthen concrete structures in flexure. The use of prestressed CFRP material offers several advantages well-reported in the literature. Regardless of such as benefits, several studies on different topics are missing. The present work intends to contribute to the knowledge of two commercially available systems that differ on the type of anchorage: (i) the Mechanical Anchorage (MA), and (ii) the Gradient Anchorage (GA). For that purpose, an experimental program was carried out with twelve slabs monotonically tested under displacement control up to failure by using a four-point bending test configuration. The effect of type of anchorage system (MA and GA), prestrain level (0 and 0.4%), width (50 mm and 80 mm) and thickness (1.2 mm and 1.4 mm) of the CFRP laminate, and the surface preparation (grinded and sandblasted) on the flexural response were the main studied parameters. Better performance was observed for the slabs: (i) with prestressed laminates, (ii) for the MA system, and (iii) with sandblasted surface preparation.     

Enhancing cation exchange capacity of chars through ozonation

The use of ozone to increase the cation exchange capacity (CEC) of two chars produced from pyrolysis of Douglas fir (Pseudotsuga menziessii) and a control bituminous coal activated carbon (AC) is reported. Chars were produced from the wood fraction of Douglas fir (DFWC) and the bark (DFBC) at 500 °C using an auger driven reactor with a nitrogen sweep gas under mild vacuum. Five ozone treatment times, ranging from 5 min to 60 min, were investigated. The initial properties of each char were found to differ significantly from the other samples in terms of surface area, proximate composition, and elemental composition. DFWC did not show significant mass loss or temperature variation during ozone treatment; however, after 1 h of oxidation both DFBC and AC samples resulted in 20% and 30% mass loss, respectively, and reactor temperatures in excess of 60 °C. Analysis of the pore size distribution of each treatment shows that ozone treatment did not significantly affect small micropores after 30 min of treatment for any material, but did reduce the apparent surface area of mesopores. Increases in carboxylic groups were identified with ozone treatment and found to correlate strongly with changes in measured CEC. The formation of lactone was found to correlate positively with reactor temperature during oxidation. These results indicate that the properties of chars, including surface area, pore structure, and chemical composition, as well as reactor conditions strongly affect the ozone oxidation of chars.     

Invader amphipods Gmelinoides fasciatus (Stebbing, 1899) inhabiting distant waterbodies demonstrate differences in tolerance and energy metabolism under elevated temperatures

Gmelinoides fasciatus is a successful invasive amphipod (Amphipoda, Crustacea) that dispersed from Lake Baikal to various waterbodies. Here we studied whether Baikal conditions are optimal for G. fasciatus in terms of thermotolerance and investigated lethal temperatures, 70 kDa heat shock protein level, energy metabolism, and antioxidant defense of animals from three geographically distant waterbodies under changing temperatures. We used acute heat exposure to 28 °C to assess the median lethal times and gradual temperature increase from 6 °C to determine the lethal temperatures. Mortality under heat shock was explainable by the baseline content of Hsp70 that correlated with thermal history. But it was not the case under gradual temperature increase where Hsp70 levels became similar and the mortality pattern changed. The most thermotolerant amphipods from the Gulf of Finland demonstrated a higher amount of free glucose during the temperature increase that may be related to the higher salinity of this waterbody and less energy required for ion regulation. Even though concentrations of major physiological ions in Lake Baikal are lower than in Lake Ladoga, G. fasciatus from Ladoga was slightly more sensitive to the gradual temperature increase. This difference could be explained by the influence of high levels of humic and other potentially toxic substances in Lake Ladoga indicated by increased activities of catalase and glutathione S-transferase. Importantly, all G. fasciatus populations accumulated relatively low levels of lactate during the temperature increase, which may reflect the ability of this invasive species to effectively maintain aerobic metabolism under various conditions.     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

Trend Analysis and Spatial Prediction of Groundwater Levels Using Time Series Forecasting and a Novel Spatio-Temporal Method

Water Resources Management - Overexploitation of groundwater in the Malayer Plain has resulted in a continuous decline of groundwater levels over recent years with associated risks to water...     

Ontogenetic habitat use and seasonal activity of Nile crocodiles (Crocodylus niloticus) in the Lake Albert delta,East Africa

Crocodiles play important roles in many ecosystems, but their populations worldwide are threatened by human exploitation and habitat destruction. We studied ontogenetic changes in habitat use and seasonal activity patterns in a population of Nile crocodiles (Crocodylus niloticus) inhabiting the Lake Albert Delta Wetland System, a Ramsar Site of international importance in Murchison Falls National Park of western Uganda. A total of 186 crocodile observations were made from monthly surveys of five transects during October 2017 to September 2018. Crocodiles exhibited a marginally bi-modal seasonal pattern, with the fewest observations from July to August and October to November, and the highest observations from January to February and April to May. Crocodiles were most frequently encountered along the north shore of the delta, especially on riverbanks with woody vegetation, followed by Cyperus papyrus-Vossia dominated habitats, while crocodiles were infrequently observed on islands and muddy banks. Habitat niche breadth was narrowest in hatchlings and widest in sub-adults, with juveniles and large adults exhibiting intermediate values. Overlap in habitat resource use across size classes was generally high, with the lowest overlap between hatchlings and juveniles, and the highest between large and sub-adult crocodiles. Our study on Nile crocodiles in the Lake Albert delta provides insights into habitat partitioning among different demographic segments of this population that can be utilized to improve its management in one of Africa’s Great Lakes by spatially and temporally focusing conservation efforts on the most used habitats and seasonal aggregations, respectively.