Wrinkling of corrugated skin sandwich panels

Compression wrinkling of composite sandwich panels with corrugated skins was investigated numerically, analytically and experimentally. Semi-circular and sine-wave shaped corrugations were studied. The corrugations significantly increased wrinkling strength when compared with equal mass flat panels. Semi-circular corrugations proved to be highly preferable to sine-wave shaped corrugations due to localized buckling in the latter. Over 40 fiberglass and foam core sandwich specimens were manufactured with semi-circular skin corrugations. These specimens were tested to failure, providing confirmation of the numerical and analytical results.     

Flexural retrofit of a bridge subjected to overweight trucks using CFRP laminates

The reinforced concrete spans of a bridge subjected to extreme vehicular loads are investigated and retrofitted with carbon fiber reinforced polymer (CFRP) laminates. A finite element model of the bridge superstructure was created to determine the forces resulting from extreme loads. A moment–curvature analysis was subsequently carried out to investigate the flexural characteristics of the reinforced concrete sections prior to and after strengthening with CFRP laminates. The analytical modeling concluded that significant strength can be gained at the ultimate limit state, while relatively small increase in strength is observed at service load levels. The increase in flexural resistance at ultimate does provide an adequate margin of safety against further overloading. The analytical investigation and the retrofitting work are presented herein.     

Fouling study of silicon oxide pores exposed to tap water

We report on the fouling of Focused Ion Beam (FIB)-fabricated silicon oxide nanopores after exposure to tap water for two weeks. Pore clogging was monitored by Scanning Electron Microscopy (SEM) on both bare silicon oxide and chemically functionalized nanopores. While fouling occurred on hydrophilic silicon oxide pore walls, the hydrophobic nature of alkane chains prevented clogging on the chemically functionalized pore walls. These results have implications for nanopore sensing platform design.     

Thermoelastic evaluation of composite laminates using digital imaging processing

The study of the variation of the curvature of non-symmetric composite laminates with temperature provides a measure of the magnitude of the thermal stresses and the mechanical behavior of the material with temperature. In the present work, an experimental method based on the pioneer use of a digital camera and image processing method is proposed to perform such measurements. Taking advantage of the method and by comparing experimental and CLT, extended-CLT and FEM simulation results, an evaluation of the residual stresses is described and an approach providing more precise determination of the residual thermal stresses in non-symmetric laminates is proposed.     

Effects of post-synthesis treatments on the pore structure and stability of MCM-41 mesoporous silica

The effects of post-synthesis treatments on the structure and the stability of MCM-41 mesoporous material were investigated. It was found that, by adding ammonium salts and adjusting pH during the post-synthesis to alkalescently synthesized MCM-41, the regularity of the pore was improved dramatically and the stability of the mesostructure was retained; conversely, they were diminished by adding sodium salts. The results were studied by analyzing the samples using X-ray diffraction (XRD), Transmission electron microscopy (TEM), Differential Thermal Analysis–Thermal Gravimetry (DTA–TG). The change of the electrostatic surrounding and the formation of hydrogen bonds caused by different ions were confirmed to be the main factors.     

Integration of batching and scheduling for hot rolling production in the steel industry

This paper investigates the hot rolling production scheduling problem in the steel industry and proposes a new mixed integer programming model for this problem based on the monolithic modeling strategy that integrates batching and scheduling. Using this strategy, the new model can simultaneously schedule multiple turns and simultaneously determine the production timetable of these turns in a global optimal view. A long-term tabu search heuristic using frequency-based memory is developed to obtain near-optimal solutions for this problem. Three kinds of speed-up strategies are developed to accelerate the search procedure of the proposed tabu search. A practical scheduling system combining the proposed mathematical model and the tabu search heuristic has been developed and tested on instances collected from practical production data. The experimental results show that the proposed mathematical model and the tabu search heuristic outperform both the current manual scheduling method and the traditional serial method.     

On the behaviour of hygroscopic wheels: Part I – channel modelling

In this paper a detailed mathematical formulation is developed for the numerical modelling of the behaviour of a channel of a hygroscopic compact matrix. A comparison between the detailed version and a simplified one is performed considering a two-dimensional airflow between desiccant parallel plates. The distinct heat and mass transfer phenomena are strongly coupled, and some properties of the airflow and of the desiccant medium exhibit important changes during the sorption processes. Both physical models take into account the gas side and solid side resistances to heat and mass transfer. The wall domain is treated similarly in both models, by taking into account the simultaneous heat and mass transfer together with the water adsorption/desorption process. Two phases co-exist in equilibrium inside the desiccant porous medium, the equilibrium being characterized by sorption isotherms without hysteresis. The detailed model is based on the solution of the differential equations for the conservation of mass, energy and momentum, assuming that no momentum transport exists in the porous wall domain. In the simplified model, the airflow is treated as a bulk flow, the interaction with the wall being evaluated by using appropriated convective coefficients.Both models are compared in the simulation of a parallel plate channel during an adsorption process. The results show a good agreement for channel lengths greater than 0.1 m. In part II of the paper, the simplified model is adapted to the simulation of the three-dimensional problem in the channel of a hygroscopic rotor, and it is used to perform parametric studies.     

Minimum weight design of inhomogeneous rotating discs

There are numerous applications for gas turbine discs in the aerospace industry such as in turbojet engines. These discs normally work under high temperatures while subjected to high angular velocities. Minimizing the weight of such items in aerospace applications results in benefits such as low dead weights and lower costs. High speed of rotation causes large centrifugal forces in a disc and simultaneous application of high temperatures reduces disc material strength. Thus, the latter effects tend to increase deformations of the disc under the applied loads. In order to obtain a reliable disc analysis and arrive at the corresponding correct stress distribution, solutions should consider changes in material properties due to the temperature field throughout the disc. To achieve this goal, an inhomogeneous disc model with variable thickness is considered. Using the variable material properties method, stresses are obtained for the disc under rotation and a steady temperature field. In this paper this is done by modelling the rotating disc as a series of rings of different but constant properties. The optimum disc profile is arrived at by sequentially proportioning the thicknesses of each ring to satisfy the stress requirements. This method vis-à-vis a mathematical programming procedure for optimization shows several advantages. Firstly, it is simple iterative proportioning in each design cycle not requiring involved mathematical operations. Secondly, due to its simplicity it alleviates the necessity of certain simplifications that are common in so-called rigorous mathematical procedures. The results obtained, compared to those published in the literature show agreement and superiority. A further advantage of the proposed method is the independence of the end results from the initially assumed point in the iterative design routine, unlike most methods published so far.     

Gait function in spastic hemiparetic patients walking barefoot, with firm shoes, and with ankle-foot orthosis

Cortical spreading depression is a wave of electrical and biochemical changes that spreads across the cerebral cortex. It has been hypothesized to be an important underlying cause of the visual disturbances occurring during the migraine aura, but this is difficult to test in animals or humans. We created a computational model of cortical spreading depression and found that during the wave of biochemical changes the spatial pattern of neural activity broke up into irregular patterns of lines and small patches of highly activated elements. The corresponding visual disturbances that would be produced by these patterns of neural activity resemble the hallucinations reported during the migraine aura, providing strong support for the cortical spreading depression hypothesis of migraine. The model also makes the testable prediction that these hallucinations move at an exponentially increasing speed across the visual field.