Delayed failure of ceramic matrix composites in tension at elevated temperatures

Ultimate tensile strength of five different continuous fiber-reinforced ceramic matrix composites (CMCs), including SiC_f/BSAS (two dimensional (2D), 2 types), SiC_f/MAS (2D), SiC_f/SiC (2D), and C_f/SiC (2D, 2 types), was determined as a function of test rate at 1100–1200 °C in air. All five CMCs exhibited a significant dependency of ultimate tensile strength on test rate such that the ultimate tensile strength decreased with decreasing test rate. The dependency of ultimate tensile strength on test rate, the applicability of preload technique, and the predictability of life from one loading configuration (constant stress-rate loading) to another (constant stress loading) all suggested that the overall, phenomenological delayed failure of the CMCs would be governed by a power-law type of slow crack growth.     

Systematic methodology for exploration of performance – Energy trade-offs in network applications using Dynamic Data Type refinement

Modern network applications require high performance and consume a lot of energy. Their inherent dynamic nature makes the dynamic memory subsystem a critical contributing factor to the overall energy consumption and to the execution time performance. This paper presents a novel, systematic methodology for generating performance-energy trade-offs by implementing optimal Dynamic Data Types, finely tuned and refined for network applications. Our systematic methodology is supported by a new, fully automated tool. We assess the effectiveness of the proposed approach in four representative, real-life case studies and provide significant energy savings and performance improvements compared to the original implementations.     

Simulating Experiment for Temperature Field of Frozen Subgrade Using Regulation Tubes

The main factors that influence the temperature field of frozen subgrade were analyzed.The experimental equipment for simulating frozen subgrade was built up,and the declining regulating tubes were placed at the foot of the embankment. By means of this equipment two simulating experiments of controlling temperature filed of frozen subgrade were carried out in the laboratory. One method is to collect natural cold energy, and the other one is to collect natural cold energy ccompanied by artificial refrigeration simultaneously. The result indicates that the latter is an effective method for maintaining the stability of the frozen subgrade.     

潮水盆地北部亚盆地中侏罗统层序地层及沉积演化特征

在系统分析研究区地表露头、岩心、测井和地震资料的基础上,运用层序地层学理论和方法,针对陆相盆地层序地层分析的实际,将湖水盆地北部亚盆地中讲罗统龙凤山组划分为4个三级层序和2个二级层序.通过系统的沉积体系及沉积淀化分析,发现从一个三级层序到另一个三级层序,或物源区有很大变化,或沉积作用方式发生变化;物源区随时间的变化,反映了构造的控制作用.      

γ射线含水仪远传功能在油井的应用研究

根据目前含水仪无法远距离传输数据的情况设计出系统硬件,着重指出通过RS485实现数据的远传以及串口通讯设计。     

柴达木盆地天然气中稀有气体同位素特征

为了确定柴达木盆地勘探新层系，测试并分析了该盆地5个油气田的8个天然气样品的氦、氩同位素比值，探讨了其在大地构造背景、大地热流和气源方面的示踪意义。研究结果如下：①柴达木盆地8个天然气样品³He/⁴He值分布在2.0×10^-8～5.48×10^-8的范围，总体平均为3.7×10^-8，均在10^-8量级，体现了典型的壳源成因氦同位素的特征。②据³He/⁴He计算的大地热流值较低，分布于41.2~48.2 mW/m²之间，平均44.9 mW/m²，低于东部地区大地热流平均值73 mW/m²，表明该盆地具有较稳定的构造背景。③根据天然气⁴⁰Ar/³⁶Ar的年代积累效应，结合烃源岩分布特征推测，柴达木盆地东部凹陷区伊克雅乌汝构造伊深1井天然气应源于上第三系；西部坳陷区尕斯油田尕斯8-6井和尕斯475井天然气应源于下第三系；碱山构造碱1井天然气应源于侏罗系，碱山构造碱2井的天然气应源于上第三系；北缘块断带南八仙油气田仙试1井的天然气应源于侏罗系；南八仙油气田仙试8井和马北构造马北1井的天然气可能主要源于侏罗系。     

Tribological property of self-lubricating PM304 composite

PM304 composite has been prepared by high-energy ball milling and powder metallurgy. The composition of the PM304 composite is the same as that of PS304, but the microstructure is quite different. The microstructure of PM304 composite was fine and dense, the size of self-lubricating particles in the composite was very small. The tribological properties of PM304 composites against Inconel X-750 were examined in the temperature range from room temperature to 800 °C. The friction coefficient of PM304 was ranged from 0.32 to 0.41. At room temperature, brittle fracture occurred on the worn surface. With the increase of temperature up to 200 °C, a protective layer consisting of fluorides and Ag existed on the worn surface and led to a low wear rate. The wear resistance of the PM304 was superior to that of the PS304 in the temperature range from room temperature to 650 °C. The improvement in wear resistance of the PM304 was discussed in the terms of its microstructural characteristics.     

CHARACTERIZATION OF Si_(1-x-y)Ge_xC_y FILMS GROWN BY ION IMPLANTATION AND SUBSEQUENT SOLID PHASE EPITAXY

Si1-x-yGexCy ternary alloy films were grown on monocrystalline silicon substrates by C ion implantation and subsequent solid phase epitaxy (SPE). Two-step anneal-ing technique was employed in the SPE. The structure and electrical properties of the alloy films were determined using Fourier transform infrared spectroscopy and van der Pauw Hall measurements, respectively. With the optimization of two-step anneal-ing technique for the implanted Si1-x-yGexCy layers, a certain amount of C atoms occupied substitutional sites and no SiC was formed.     

松潘-甘孜褶皱带的深部地壳构造特征及油气前景

四川松潘-甘孜褶皱带一直是地球科学家关注的一个焦点。近年来，石油地质学家也对它表现出了很大的兴趣。根据地震测深、重、磁、电等的探查，发现该褶皱带深部有一低速高导层，而对大火成岩省一峨眉玄武岩喷溢-地幔柱的认识深化均表明，四川松潘-甘孜褶皱带是可望获得油气勘探突破的靶区，重要的是断裂构造、圈闭、储集层的耦合与优化。