Ag–Cu–BTC prepared by postsynthetic exchange as effective catalyst for selective oxidation of toluene to benzaldehyde

A mixed-node MOF catalyst Ag–Cu–BTC was prepared by postsynthetic exchange (PSE) method. It is believed that PSE method can realize isomorphous replacement of Ag ion to framework Cu ion in Cu–BTC successfully. The catalytic performance of Ag–Cu–BTC was investigated via selective oxidation of toluene to benzaldehyde by molecular oxygen in the absence of solvent and initiator. This catalyst exhibits good catalytic performance: on the premise of keeping highly selective catalysis of Cu–BTC for toluene oxidizing to benzaldehyde, the introduction of Ag (Ag content is 2.76 wt.%) can promote toluene conversion from 6.5% to 12.7%.     

一种2,6-二甲基苯甲酸的改进合成方法

以2,6-二甲基苯胺为原料,通过重氮化反应制备2,6-二甲基苯腈,经水蒸汽蒸馏法提纯后,采用75%硫酸酸化,再经酸碱法对产物进行脱色和纯化得产物2,6-二甲基苯甲酸,总收率68.4%。工艺简单、操作安全、适合工业化生产。     

徐州矿区煤层合层开采技术实践

受成煤前的沉积环境的影响,造成了煤层生成厚度的变化、煤层与岩层交替生成、煤层尖灭、合并等各种现象。徐州矿区赋存条件复杂多变,部分煤层存在层间相近或合层的状况,约占总储量22%左右。在此类煤层回采过程中,煤层的厚度、硬度和夹矸的厚度、硬度对回采工艺的选择起到决定性因素。徐矿对该类煤层的开采进行了多种模式的探索,积累了一定理论基础和实践经验。     

Third order optical nonlinearities characteristics of Disperse Red1 organic dye molecules inside of polymeric nanocapsules

Measuring nonlinear optical response of a specific material in a mixture, not only leads to investigate the behavior of a particular component in various circumstances, but also can be a way to select suitable combination and optimum concentration of additives and therefore obtaining the maximum nonlinear optical signals. In this work, by using dual-arm Z-scan technique, the nonlinear refractive index of Disperse Red1 (DR1) organic dye molecules inside the core of prepared polymeric nanocapsules was measured among various materials which prepared nanocapsules were made of them. Then the measured value was compared with nonlinear refractive index of DR1 solved in dichloromethane.     

Hazelett生产线熔炼工艺探讨

探讨了采用Hazelett生产线,从原料到合格铝液各道工序的操作要求;特别是采用电解铝液,对每道工序操作时间和铝液质量控制提出严格要求。通过实际生产,对现有熔炼炉配置、设备台数、精炼设备配置作了详细阐述,对每道工序要达到的铝液净化参数提出严格要求,经过6次净化提纯,基本满足Hazelett铸机要求,并对熔炼设备配置的不足提出合理化建议。     

萍钢高炉大修放残铁工艺实践

对萍乡萍钢炼铁厂2号、3号高炉大修放残铁的过程进行分析,总结放残铁的工艺控制心得,为今后高炉安全、顺畅、干净放残铁提供借鉴。     

M1080B无心外圆磨床改进

M1080B无心外圆磨床砂轮及导轮宽度较窄,磨削轴承套圈外圆时,磨削效率低,托板架调整较为繁琐、皮带打滑、磨损较为严重。针对上述问题,提出了相应的解决办法,提高了磨削效率。     

汽车空调的操作和应用分析

2013年国内汽车产销量超过2000万台,汽车正在快速进入中国的千家万户,但大部分车主还缺乏对汽车空调知识的了解,夏天又是空调故障多发期,如果车主了解相关汽车空调知识,在实际应用中会达到事倍功半的效果,因此介绍了一般车型的空调结构、工作原理以及特殊气候下的调节。     

空分设备气动式阀门与入口导叶的技改与维护检修

介绍了空压机防喘振阀与入口导叶、氧气输送阀与放空阀、分子筛吸附器切换阀存在问题及改造措施,阐述了空分设备低温与常温气动阀门、氮压机入口导叶存在问题及维护检修措施。