Evaluation of the HUT modified snow emission model over lake ice using airborne passive microwave measurements

The algorithms designed to estimate snow water equivalent (SWE) using passive microwave measurements falter in lake-rich high-latitude environments due to the emission properties of ice covered lakes on low frequency measurements. Microwave emission models have been used to simulate brightness temperatures (Tbs) for snowpack characteristics in terrestrial environments but cannot be applied to snow on lakes because of the differing subsurface emissivities and scattering matrices present in ice. This paper examines the performance of a modified version of the Helsinki University of Technology (HUT) snow emission model that incorporates microwave emission from lake ice and sub-ice water. Inputs to the HUT model include measurements collected over brackish and freshwater lakes north of Inuvik, Northwest Territories, Canada in April 2008, consisting of snowpack (depth, density, and snow water equivalent) and lake ice (thickness and ice type). Coincident airborne radiometer measurements at a resolution of 80 × 100 m were used as ground-truth to evaluate the simulations.The results indicate that subsurface media are simulated best when utilizing a modeled effective grain size and a 1 mm RMS surface roughness at the ice/water interface compared to using measured grain size and a flat Fresnel reflective surface as input. Simulations at 37 GHz (vertical polarization) produce the best results compared to airborne Tbs, with a Root Mean Square Error (RMSE) of 6.2 K and 7.9 K, as well as Mean Bias Errors (MBEs) of −8.4 K and −8.8 K for brackish and freshwater sites respectively. Freshwater simulations at 6.9 and 19 GHz H exhibited low RMSE (10.53 and 6.15 K respectively) and MBE (−5.37 and 8.36 K respectively) but did not accurately simulate Tb variability (R = −0.15 and 0.01 respectively). Over brackish water, 6.9 GHz simulations had poor agreement with airborne Tbs, while 19 GHz V exhibited a low RMSE (6.15 K), MBE (−4.52 K) and improved relative agreement to airborne measurements (R = 0.47). Salinity considerations reduced 6.9 GHz errors substantially, with a drop in RMSE from 51.48 K and 57.18 K for H and V polarizations respectively, to 26.2 K and 31.6 K, although Tb variability was not well simulated. With best results at 37 GHz, HUT simulations exhibit the potential to track Tb evolution, and therefore SWE through the winter season.     

Cancer Stem Cells: Biological Functions and Therapeutically Targeting

Almost all tumors are composed of a heterogeneous cell population, making them difficult to treat. A small cancer stem cell population with a low proliferation rate and a high tumorigenic potential is thought to be responsible for cancer development, metastasis and resistance to therapy. Stem cells were reported to be involved in both normal development and carcinogenesis, some molecular mechanisms being common in both processes. No less controversial, stem cells are considered to be important in treatment of malignant diseases both as targets and drug carriers. The efforts to understand the role of different signalling in cancer stem cells requires in depth knowledge about the mechanisms that control their self-renewal, differentiation and malignant potential. The aim of this paper is to discuss insights into cancer stem cells historical background and to provide a brief review of the new therapeutic strategies for targeting cancer stem cells.     

Utilization of a Biodegradable Mulch Sheet Produced from Poly(Lactic Acid)/Ecoflex?/Modified Starch in Mandarin Orange Groves

We have developed a mulch sheet made by inflation molding of PLA, Ecoflex^® and modified starch, which all have different biodegradabilities. A field test of use as an agricultural mulch sheet for mandarin oranges was carried out over two years. The mechanical properties of the mulch sheet were weakened with time during the field test, but the quality of the mandarin oranges increased, a result of the controlled degradation of the sheet. The most degradable modified starch degraded first, allowing control of the moisture on the soil. Accelerator mass spectroscopy was used for evaluation of the biomass carbon ratio. The biomass carbon ratio decreased by degradation of the biobased materials, PLA and modified starch in the mulch sheet.     

Ballistic penetration of steel plates

This paper presents a research programme in progress where the main objective is to study the behaviour of Weldox 460 E steel plates impacted by blunt-nosed cylindrical projectiles in the lower ordnance velocity regime. A compressed gas gun is used to carry out high-precision tests, and a digital high-speed camera system is used to photograph the penetration process. A coupled constitutive model of viscoplasticity and ductile damage is formulated and implemented into the non-linear finite element code LS-DYNA, and the material constants for the target plate are determined. The proposed model is applied in simulations of the plate penetration problem and the results are compared with test data. Good agreement between the numerical simulations and the experimental results is found for velocities well above the ballistic limit, while the ballistic limit itself is overestimated by approximately 10% in the numerical simulations.     

Prevalence of Moisture Problems in Finnish Houses*

Abstract A random sample of 450 houses representing various decades was surveyed by trained civil engineers for signs of water leaks or condensation. In 80% of the houses, signs of current or previous moisture fault were observed. In most houses, the surveyors made at least two separate observations of moisture but the occupants missed one in every two of these signs of moisture damage. Part of the faults were caused by flaws in design or construction, and part were due to aging of materials. Approximately 55% of the Finnish houses (i.e., a total of nearly 500 000 houses), were assessed to be in need of repair or more thorough inspection. The observations were equally frequent in the houses of different age, but certain types of moisture damage were characteristic of certain types of buildings or constructional methods used in different eras. Roof geometry was a significant factor accounting for roof leakages. The majority of the faults could be repaired at reasonable cost.     

Living carbocationic polymerization

Mono- and bifunctionaltert-alcohols, i.e., cumyl alcohol (CumOH), 2,4,4-trimethyl-2-pentanol (TMPOH), 2,6-dihydroxy-2,4, 4, 6-tetramethylheptane (TMHDiOH), in conjunction with BCl₃ have been shown to be efficient initiating systems for the living polymerization of isobutylene (IB) in CH₃Cl or CH₂Cl₂ solvents in the –10° to –80°C range. The living nature of the polymerizations was demonstrated by linear M_n versus amount of polyisobutylene (PIB) formed (W_PIB) plots starting at the origin and corresponding horizontal number of PIB moles formed (N) versus W_PIB plots. Quenching with methanol producestert-chlorine terminated PIBs. Quantitative dehydrochlorination of the latter products yields exo-olefin (isopropylidene) end groups. These experiments demonstrate that living carbocationic polymerizations have in fact been conducted in these laboratories long ago (1) without having been recognized as such.     

HIV-specific mucosal and cellular immunity in HIV-seronegative partners of HIV-seropositive individuals

HIV-specific mucosal and cellular immunity was analyzed in heterosexual couples discordant for HIV status in serum and in HIV-unexposed controls. HIV-specific IgA but not IgG was present in urine and vaginal wash samples from HIV-exposed seronegative individuals (ESN), whereas both IgA and IgG were observed in their HIV-seropositive partners; antibodies were not detected in low-risk controls. Envelope protein (Env) peptide-stimulated interleukin-2 (IL-2) production by peripheral blood mononuclear cells (PBMCs) was detected in 9 out of 16 ESNs, 5 out of 16 HIV-infected patients and 1 out of 50 controls. Env peptide-stimulated PBMCs of ESNs produced more IL-2 and less IL-10 compared with those of HIV-infected individuals; no differences were observed in chemokine production or in CCR5 expression. These data demonstrate that a compartmentalized immune response to pathogens is possible in humans and raise the possibility of protective roles for cell-mediated immunity and mucosal IgA in HIV-seronegative individuals exposed to HIV.     

On the decidability of sparse univariate polynomial interpolation

We consider the problem of determining whether or not there exists a sparse univariate polynomial that interpolates a given setS={(x _i ,y _i )} of points. Several important cases are resolved, e.g., the case when thex _i's are all positive rational numbers. But the general problem remains open.     

Synthesis of electrically conducting composite adsorbents for wastewater treatment using adsorption & electrochemical regeneration

Electrically conducting adsorbent materials called Nyex™ 1000 & 2000 have already been reported with comparatively low adsorption capacity for various organic, biologically non-degradable and toxic compounds. Two composite adsorbents called CA₁ & CA₂ were synthesized using synthetic graphite-carbon black and expanded graphite-carbon black respectively. The aim of developing the new adsorbents was to increase the adsorption capacity along with good electrical properties. The developed adsorbents were characterized using N₂ adsorption for specific surface area, Boehm surface titration for surface chemistry, bed electrical conductivity, laser size analyzer for average particle size, and scanning electron microscope (SEM) for particle morphology and shape. Then both the composite adsorbents were tested for the adsorption of acid violet 17 followed by an electrochemical regeneration. The adsorption study revealed that both the adsorbents had almost similar kinetic behavior with a significant increase in adsorption capacity for acid violet 17 (300 & 26 mg g⁻¹ respectively) when compared with the adsorption capacity of previously developed electrically conducting materials called Nyex™ 1000 & 2000 (3.5 and 9 mg g⁻¹ respectively). The composite adsorbent CA₂ was successfully electrochemically regenerated by passing an electric charge of 138 C g⁻¹ at a current density of 14 mA cm⁻² for a treatment time of 60 min, whereas, the composite adsorbent CA₁ could not be regenerated successfully. The regeneration efficiencies of CA₂ were obtained at around 120% during five adsorption–regeneration cycles. The amount of actual charge passed of 138 C g⁻¹ for achieving 100% regeneration efficiency was found to be similar with stoichiometrically calculated amount of charge. The amount of electrical energy required to oxidize each mg of adsorbed acid violet onto CA₂ (24 J mg⁻¹) was found to be significantly lower to that of Nyex™ 1000 & 2000 adsorbents (52 J mg⁻¹ & 32 J mg⁻¹ respectively).     

Magnetic moments and exchange interaction in Sm(Co, Fe)5 from first-principles

The electronic structure, magnetization and exchange interaction in Sm(Co_1?xFe_x)₅ with x = 0–1 are studied from a first-principles density functional calculation. The dependence of the magnetization on Fe content shows a 3d-like Slater–Pauling relationship in these alloys. As the Fe content x increases from 0 to 1.0, the magnetization increases from 7.8 μ_B to 10.6 μ_B (x = 0.8) and then decreases to 10.0 μ_B (x = 1). The effective exchange interaction parameters show a peak value around x = 0.6, which is ascribed to the exchange parameters between Fe and Co being larger than those for Co–Co and Fe–Fe pairs. The estimated T_C from the calculated exchange parameters range between 890 K and 1357 K in Sm(Co_1?xFe_x)₅ using a multi-sublattices mean field model.