Numerical simulation of substrate effects on spinodal decomposition in polymer binary mixture: Effects of the surface potential

The surface-directed spinodal decomposition (SDSD) of polymer binary mixture with different values of surface potential is numerically simulated in three-dimension (3D) by cell dynamic systems (CDS). Furthermore, the growth laws of the wetting layer are theoretically analyzed by the current equation and the dynamical scaling. The results show that the thickness of the wetting layer increases with the increasing surface potential. The crossover, which is later for larger values of surface potential, appears in the evolution curve of the wetting layer. Before the crossover, the growth law is the surface potential dependant growth law. Subsequently, the growth law is the typical Lifshitz-Slyozov (LS) growth law. The results indicate that the surface potential can result in the mutual transformation between completely wetting and partially wetting for the substrate interface. It can be found that the higher surface potential leads to the faster and stronger transmission of the effect of the substrate on the spinodal decomposition in the bulk.     

Repair of concrete beams – a case study

This paper reports results of a study conducted to investigate the causes of cracks noted on concrete beams in a student facility on a university campus. Cracks were noted on the beams within 6 months of construction. They increased in size within a month. Field and laboratory investigations were conducted to assess the causes of cracking of the beams. The compressive strength of the concrete cores taken from the beams was found to be less than the specified strength. The cracks were repaired by epoxy injection and the structural integrity of the repaired beams was assessed by conducting load tests. The deflection of the repaired beams, under the imposed test loads, was less than that specified by ACI 318 indicating the efficiency of the repair procedure utilized.     

Effect of Magnetotactic bacteria on the susceptibility in Chinese loess–paleosol sequences

A simulated experiment of Magnetotactic bacteria (MB) effect on susceptibility in the samples from the 5th to 6th loess layers (L₅–S₅–L₆) in Xifeng and Duangjiapo sections was performed. It is demonstrated that MB can increase the susceptibility of the samples and promote newly produced magnetic minerals from paleosol layers under the suitable condition. The tiny magnetic particles and arranged as a chain in the minerals less than 30 μm were found in the paleosol sample of Duangjiapo section.     

Microstructure and mechanical behaviour of semi-solid die-casting AZ91D magnesium alloy

Microstructures and mechanical properties of an AZ91D magnesium alloy prepared with semi-solid die-casting (SSDC) were characterized in as-cast conditions. The SSDC alloy exhibits a unique microstructure featuring primary α-Mg globules uniformly distributed in the matrix of fine secondary α-Mg grains and β-Mg₁₇Al₁₂ intermetallic. High ultimate tensile strength and elongation have been achieved before fracture. Observations on the vertical-section microstructure of the fractured sample by scanning electron microscopy (SEM) show that the crack mainly originated from the brittle fracture of the eutectic phase causes the interface decohesion of the ductile Mg phase, making fracture a rather critical event. Before that, the deformation of ductile α-Mg phase in the matrix as well as the “pulling out” of primary α-Mg phase combines to provide the SSDC alloy a certain strain.     

Kinetics and mechanism of carbothermic reduction of magnesia

The reaction between MgO and graphite powders under flowing argon atmosphere was studied using a dynamic thermogravimetric method. In the temperature range 293 to 1973 K, the effects of compacting pressure, magnesia/carbon ratio, heating rate, Ar carrier-gas flow rate, and CO-partial pressure were investigated. An experimentally determined reaction mechanism was proposed and discussed. The reduction process could be divided into two stages. The first stage includes the direct reaction between MgO and graphite particles and partial gas-solid reaction at relatively low temperature (below 1750 K). The overall reaction rate depends on the solid phase-boundary reaction between magnesia and carbon particles. The second stage is the gas-solid reaction between CO and MgO, which determines the overall reaction rate. The apparent activation energies of the two stages were estimated to be 208.29 and 374.13 kJ/mol, respectively.     

Precipitation of barium sulfate nanoparticles via impinging streams

The impinging streams technology (abbreviated as IS) has good micromixing in the precipitation processes. The experiments were loaded with two reactants, BaCl₂ and Na₂SO₄, to prepare BaSO₄ in the impinging streams reactor, comparing with those in the direct precipitation (DP) reactor. XRD and TEM were used to analyze the crystal type, the morphology and size of particles through the photographs. The results indicate the size of the particles from IS is about 30 nm and of narrower distribution and finer dispersibility than that from DP.     

Solution-chemistry analysis of ammonium bicarbonate consumption in rare-earth-element precipitation

A solution-chemistry analysis is applied to estimating the consumption of ammonium bicarbonate in the recovery of rare-earth (RE) elements from leachates of weathered clays. The theoretical analysis shows that a two-step process is needed for recovering RE from the leachates of the weathered clays by precipitation using ammonium bicarbonate. The first step is a precipitation at solution pH 5 to remove impurities such as Fe and Al. The second step is to precipitate RE by adjusting the solution pH above 8. The consumption of ammonium bicarbonate was found to depend on the concentration of RE elements and impurities in the leachates. The total amount of ammonium bicarbonate consumption for the entire process was determined experimentally, and the results showed an excellent agreement with that calculated based on solution-chemistry analysis. The decomposition of H₂CO₃ was identified as one of the main causes of ammonium bicarbonate overdose, accounting for up to 41 pct in comparison to 20 pct consumption for the removal of impurities. The amount of ammonium bicarbonate required in terms of the NH₄HCO₃: RE₂O₃ (RE oxides) molar ratio was found to be 4:1 for maximal RE recovery. An overall RE recovery around 90 pct was achieved with a product purity being about 90 pct.     

Modeling dynamic developable meshes by the Hamilton principle

In this paper, a new dynamic developable surface model is proposed. The proposed model represents developable surfaces using triangle meshes. A novel algorithm is proposed to introduce the Hamilton principle into these meshes such that the resulting developable model is dynamic, i.e., it can offer a time-dependent continuous path to deform the model. Applications with examples are presented; these show that the proposed technique can model buckled developable surfaces well, and can offer physically-realistic animations of deformed developable surfaces.