Performance analysis of a combined system for cold and power

This paper presents a theoretical study of a combined thermal system, which combines the Rankine cycle and the ejector refrigeration cycle. This combined cycle produces power and refrigeration simultaneously. The thermal system could use low temperature heat sources. A simulation was carried out to evaluate the cycle performance using several working fluids as R123, R141b, R245fa, R601a and R600a. A one-dimensional mathematical model of the ejector was developed using the equations governing the flow and thermodynamics based on the constant area ejector flow model. The ejector is studied in optimal operating regime. The influence of thermodynamic parameters on system performance is studied. The results show that the condenser temperature, the evaporation temperature, the extraction ratio, the fluid nature and the generating temperature have significant effects on the system performances (the coefficient of performance of the combined cycle and the entrainment ratio of the ejector).     

Global stable tracking control of underactuated ships with input saturation

In this paper, tracking control of underactuated ship in the presence of input saturation is addressed. By dividing the tracking error dynamic system into a cascade of two subsystems, the torques in surge and yaw axes are designed separately using the backstepping technique. More specifically, we design the yaw axis torque in such a way that its corresponding subsystem is finite time stable, which makes it to be de-coupled from the second subsystem after a finite time. This enables us to design the torque in the surge axis independently. It is shown that the closed-loop system is stable and the mean-square tracking errors can be made arbitrarily small by choosing design parameters. Simulation results also verify the effectiveness of the proposed scheme.     

Microstructure and mechanical properties of laser beam welded Al–Li alloy 2060 with Al–Mg filler wire

Alloy 2060-T8 is a newly developed high-strength Al–Li alloy for applications in aircraft industry. Crack-free welds were obtained in laser beam welding with 5087 filler wire under optimized welding conditions. In this paper, fusion zone microstructure and joint mechanical properties were investigated. Microstructure typical for the weld metal consists of α-Al matrix with a few nanoscale precipitates inside and a coarse icosahedral quasicrystalline T₂ phase at the dendritic and grain boundaries. The quasicrystalline occurred normally in Al–Li–Cu alloys with higher Li contents. Our investigations show that the icosahedral quasicrystalline phase T₂ phase forms in the laser-welded Al–Li alloy 2060 with lower Li content as a result of segregation and replacement of Mg element. The joint tensile strength in as-welded condition is around 317 MPa, about 63% of that of the base metal, and fracture occurs within the fusion zone.     

The relationship between centrality and land use patterns: Empirical evidence from five Chinese metropolises

The relationship between location and land use patterns is one of the classic theoretical issues in urban studies. Classic models based on the monocentricity hypothesis have limitations in the interpretation of modern urban structure. China has experienced institutional transformation in recent decades, and the interaction of national government policy, market forces and the natural environment has influenced urban planning in Chinese metropolises, resulting in urban structures with special characteristics. This paper examines the distribution of location and land use intensity, and tested the Alonso model by the relationship between them in five Chinese metropolises using Point of Interest data, space syntax methodology, the grid weighted statistical method and the Geographically Weighted Regression (GWR) model. Universal patterns about the scaling relation between intensity of land use types and the centrality of location are revealed. The elasticity of land use types to location, from high to low sensitivity, is commercial, residential then industrial land in most of the five metropolises studied. The sensitivity sequence of land use studied suggests that the hypothetical model based on the classical Alonso model can explain the spatial structure of modern metropolises in China to some extent, especially for the commercial land. But the order of sensitivity of residential land and industrial land to location does not conform to the model. The spatial heterogeneity in land use intensity and centrality were explored and the factors embedded were discussed. It can be found that the relation between centrality and land use intensity conforms to power law. In most of the metropolises studied, when the scaling relation between land use intensity and centrality is super linear, the sequence of the frequency value from high to low are commercial, residential and industrial land; when the scaling relation is sublinear, the sequence of the frequency value is industrial, residential and commercial land.     

Rip currents near coastal structures in Lake Michigan: Characterization and assessment for warnings

Rip currents near coastal structures commonly occur in Lake Michigan in the Great Lakes region of the United States. Lack of timely warning due to undocumented characteristics of rip currents and no assessment tool can contribute to tragic drownings incidents. In this paper, we characterized rip current occurrences near breakwater structures and developed an assessment tool for providing timely rip current warnings to beachgoers at the study site, City of Port Washington, WI. Characteristics of rip currents near the structure were observed from field measurements or visual images. Deflection rip currents had speeds of ～ 0.2 m/s and lasted for several hours. The rip current occurrences were associated with environmental proxies. It was found that rip currents can occur even when the water appears calm near the structure. A Structure Rip Checklist and Assessment Matrix (SRiCAM) with a four-tiered risk was developed and validated using observations. Furthermore, the SRiCAM was integrated into cyberinfrastructure with a data contingency plan to provide real-time warnings to the public. The applicability of the SRiCAM to other locations across Lake Michigan was further tested and results are promising. Overall, the SRiCAM has the potential to be widely extended to foster recreational water safety and resilience to rip current hazards in the Great Lakes.     

TiO2/MXene-Assisted LDI-MS for Urine Metabolic Profiling in Urinary Disease

Cancer remains an intractable medical problem. Rapid diagnosis and identification of cancer are critical to differentiate it from nonmalignant diseases. High-throughput biofluid metabolic analysis has potential for cancer diagnosis. Nevertheless, the present metabolite analysis method does not meet the demand for high-throughput screening of diseases. Herein, a high-throughput, cost-effective, and noninvasive urine metabolic profiling method based on TiO₂/MXene-assisted laser desorption/ionization mass spectrometry (LDI-MS) is presented for the efficient screening of bladder cancer (BC) and nonmalignant urinary disease. Combined with machine learning, TiO₂/MXene-assisted LDI-MS enables high diagnostic accuracy (96.8%) for the classification of patient groups (including 47 BC and 46 ureteral calculus (UC) patients) from healthy controls (113 cases). In addition, BC patients can also be identified from noncancerous UC individuals with an accuracy of 88.3% in the independent test cohort. Furthermore, metabolite variations between BC and UC individuals are investigated based on relative quantification, and related pathways are also discussed. These results suggest that this method, based on urine metabolic patterns, provides a potential tool for rapidly distinguishing urinary diseases and it may pave the way for precision medicine.     

A Review of Ultrasonic Reflectometry for the Physical Characterization of Lubricated Tribological Contacts: History,Methods, Devices,and Technological Trends

Tribology Letters - The tribological behavior of a nickel-based single crystal superalloy treated by shot-peening has been investigated. Friction tests under three normal loads and three...