基于支持向量机的代谢网络特征分析

把细胞内所有生化反应表示为一个网络指为代谢网络,是所有参与代谢过程的化合物之间以及所有催化酶之间的相互作用的反映,是抽象表达对细胞的代谢。在不同的物种中都含有大量的代谢翻译,却代谢网络是高度保守的。要了解包括代谢系统在内的许多自然、社会系统都起着重要的作用,所以要对于复杂网络进行研究并掌握它们的规律意义很大。利用代谢网络对微生物的耐热性进行分类研究对认识和利用细胞代谢过程有很大的帮助,从而促进发酵工程、制药工业等产业的发展。     

计算机组装课程教学中的多媒体应用探究

因为多媒体技术具有多样的优点,为此,在当前的教学改革在全国范围内如火如荼的进行的时候,将多媒体技术引入到计算机组装课程教学活动中,必然能大大提高课堂教学效率,但是,在课堂上广泛应用多媒体技术的时候,有些问题也要引起足够的重视,避免不利影响的发生。     

计及灵活性储备的含风电多微电网系统分布式协调调控策略

高比例风电的接入和需求响应技术的应用对分布式架构下的多微电网系统有功功率动态平衡提出了更高的要求,有必要充分利用灵活性资源对系统进行协调调控.提出一种新颖的灵活性电池储备模型对多微电网系统灵活性备用容量进行评估,定义虚拟灵活性电池储备模型对风电场备用与需求响应负荷备用进行评估,充分挖掘其调频的潜在能力.在此基础上,基于一致性算法求解该模型下各微电网的功率分配,提出计及灵活性储备的含风电多微电网系统分布式协调调控策略,实现分布式架构下灵活性资源的协调优化.通过华东某地区实际数据验证了所提策略的有效性.算例结果表明,协调优化源-荷灵活性储备资源在保障风电消纳的同时,实现了分布式架构下系统的动态功率平衡.     

PPV Nanotube Sensor Arrays for Explosives Identification by Excitation Wavelength Regulation

The development of sensitive materials for standard and improvised explosives is greatly significant to homeland security. In this paper, the phosphotungstate (NaPT) doped polyphenylene vinylene (PPV) nanotube arrays (NTAs), with excellent optical response, chemical stability, and larger specific surface area, are successfully fabricated by means of the “precursor film” infiltration method. The efficient charge carriers' separation of PPV NTAs can be achieved by doping NaPT to realize the photoelectric detection of explosive vapors. In addition, the identification of six explosives, including ammonium nitrate (AN), dinitrotoluence (DNT), picric acid (PA), p-nitrotoluene (PNT), triacetone triperoxide (TATP), and trinitrotoluene (TNT), can also be realized through the fingerprint atlas. Moreover, the adsorption energy and excited oscillator intensity has also been employed to explain the interaction between NaPT doped PPV nanotube arrays and various explosive molecules. Obviously, the NaPT doped PPV developed has the potential to be used as an explosive sensor.     

Enhanced anti-biofilm activity of facile synthesized silver oxide nanoparticles against K. pneumoniae

Journal of Inorganic and Organometallic Polymers and Materials - The silver oxide nanoparticle was successfully synthesized using floral waste by simple one pot, cost effective method. The complete...     

基于氢能的风-火耦合多能系统设计与综合评估

为了提高火电机组深度调峰极限,挖掘其提升新能源消纳能力的潜力,构建了基于氢能的风-火耦合多能系统.建立了风-火耦合多能系统的设计框架,包括设计原则、系统组成及评价指标体系等,提出了富裕风电制氢支撑的风-火耦合多能系统的总体结构;考虑经济性、能源利用、"双碳"目标、可靠性这4个方面的影响因素,提出了风-火耦合多能系统的多尺度评价指标及其数学模型,并基于模糊层次分析-熵权法确定各指标的权重占比;以某地区拟建的风-火耦合多能系统结构设计为例,验证了所提方法的有效性,可为实际工程建设提供了一定的参考.     

不同养护方式对水泥-锂渣浆体水化程度影响

为了分析水泥-锂渣浆体的水化程度, 采用高温煅烧法测试各龄期的化学结合水, 结果发现:水泥-锂渣浆体的化学结合水量随龄期的延长而增加, 水化3 d和7 d时能达到水化90 d时的60%和80%。高温养护、碱激发、高温和碱激发均能提高锂渣复合水泥基材料早期的化学结合水量, 最高可达3~4倍, 提高的幅度依次为碱激发和高温养护＞碱激发＞高温养护＞标准养护。高温和复合环境养护也能提高水泥的水化程度, 1~28 d内, 锂渣掺量在40%以内时, 水泥水化程度相对指数(ψ值)均大于1;掺量为60%时, ψ值均小于1。综上, 高温养护、碱激发、高温和碱激发均能提高锂渣和水泥的水化程度, 高温和碱激发复合作用时较为显著。     

Safety-based availability assessment at design stage

The availability of a system or equipment is one of the crucial characteristics that measures the customer satisfaction and strongly influences his final choice decision between concurrent products. The aim of this work is to provide an approach to improve the products availability assessment by taking into account the safety criteria by considering the use situations at design stage. Our work focuses on the routine design of complex products. The availability is often simply estimated considering reliability and maintainability. Basically, the intrinsic availability is the probability that it is operating satisfactorily at any point in time when used under conditions stated by design specifications. The time considered includes operating time and active repair time. Thus, intrinsic availability excludes from consideration all other times in the product lifecycle such as: accident management time, storage time, administrative time or logistic time. But many studies show that the loss of availability performance is also due to accidents that occur in different unforeseeable utilization situations. This engenders stops of the system to ensure the users safety according to standards recommendations. In this purpose, we consider the structural product architecture and the different use cases that correspond to the operational states and downtimes due to stop events that may happen during the utilization like failures, maintenance tasks and accidents. Then, we propose a product behavioral analysis including the use cases to describe interactions between the product and users or maintenance operators. We use Markov chains to model the use cases corresponding to operating time (OT), maintenance time (MT) and preparing time after accidents (RT). Then these three parameters are considered to specify a generic approach to improve the availability assessment. Such an approach provides the traceability of the product behavior along its lifecycle. In this way, the main causes of stop can be identified and this may guide the designer for improving the availability of the product future versions. To validate our approach, an application is presented considering a printing line. The comparison of our simulation considering an industrial case study shows a good agreement about the influence of safety on the availability.     

超高分子质量聚乙烯纤维黏结强度增强方法研究

为提高超高分子质量聚乙烯(UHMWPE)纤维复合材料中纤维与树脂基体之间的界面黏结强度,提出通过不同质量分数的硅烷偶联剂KH-570处理纳米SiO_2对UHMWPE纤维进行表面改性。对改性处理后的纤维与乙烯基酯树脂进行黏结强度试验,发现硅烷偶联剂处理纳米SiO_2能有效提高纤维的界面黏结强度,同时使纤维保持一定的断裂强度。     

喹喔啉类衍生物与甲基噻吩共聚物的合成及性质

在二价镍配合物催化下,2,5-二溴-3-甲基噻吩格氏试剂与5,8-二溴-萘基喹喔啉和5,8-二溴-菲基喹喔啉共聚,得到相应的喹喔啉类共轭共聚物,收率分别为65%和68%。通过FT IR、1H-NM R对聚合物及中间体的结构进行了表征。聚合物的循环伏安图中,分别在0.66 V(Epa)/0.37 V(Epc)(Copo ly-m er I),0.78 V(Epa)/-0.06V(Epc)和1.26(Epa)/0.46(Epc)(Copo lym erⅡ)处观察到氧化还原峰,表明该类聚合物有电化学活性。在紫外-可见光谱中,分别在263 nm,323 nm处(Copo lym erⅠ)和299 nm,402 nm处(Copo lym erⅡ)出现吸收峰。所得聚合物分别在504 nm和513 nm处出现荧光最大发射峰。