闪光灯泵浦Nd3+:GGG激光特性研究

用闪光灯泵浦掺钕钆镓石榴石(Nd^3 ：GGG)激光晶体，研究了脉冲宽度0．5ms、1ms、1．5ms和2ms的放电泵浦下激光输出，实验获得了1．92J的最大激光能量．     

可配置非幂方分频器的全新设计方法

本文采用基于计数空间完全划分和周期插入控制计数过程方法设计了非幂方分频器,采用这种全新思路设计的非幂方分频器分频范围很宽,分频输出对后续分频支持好,非常适用于通讯接口中的波特率时钟设计.此外,这种设计思路对系统定时电路和节拍控制电路设计也有一定的借鉴意义.     

3D polymeric microfluidic device fabrication via contact liquid photolithographic polymerization (CLiPP)

In this contribution, a new method for the fabrication of complex polymeric microfluidic devices is presented. The technology, contact liquid photolithographic polymerization (CLiPP), overcomes many of the drawbacks associated with other rapid prototyping schemes, such as limited materials choices and time-consuming microassembly protocols. CLiPP shares many traits with other photolithographic methods, but three distinct features: (i) liquid photoresists in contact with the photomask, (ii) readily removed sacrificial materials, and (iii) living radical processes, enable multiple polymeric chemistries and mechanical properties while simultaneously enabling facile fabrication of 3D geometries and surface chemistry control. This contribution details fabrication techniques and methods for the fabrication of high aspect ratio posts covalently bonded to a polymeric substrate, an array of independently stacked bars on top of perpendicular bars, multiple undercut structures fabricated simultaneously, and a complex 3D geometry with intertwined channels.     

掺杂Yb的TiO2光催化剂的制备和性能

采用溶胶-凝胶法制备了Yb掺杂TiO2纳米光催化剂,并通过XRD和BET等手段进行了表征.以对苯二甲酸作为探针分子,结合化学荧光技术研究了光催化剂表面羟基自由基的生成;并以苯酚为光催化降解反应模型化合物,考察了光催化剂的活性.测定了苯酚在TiO2和Yb掺杂TiO2光催化剂上的吸附常数.结果表明：Yb掺杂使TiO2的粒径减小,比表面积增大,同时导致羟基自由基的生成速率增大.Yb掺杂有利于反应底物在催化剂表面的吸附,Yb的最佳掺入量为Yb/Ti摩尔比=0.8%.     

Research on charge ordering and magnetic properties in La0.3Ca0.7Mn1-xWxO3 system

The perovskite manganite sample La0.3Ca0.7Mn1-xWxO3 （x = 0.08, 0.12） was prepared by the solid-state reaction method. The effect of W doping on the Mn site to La0.3Ca0.7MnO3 charge ordering phase and the changing process of magnetic properties were studied through the measurement of the M-T curve, M-H curves, and ESR curves of the sample. The results showed that when x = 0.08, the charge ordering （CO） phase exists in the system, the transition temperature Tco= 275 K, and the system exhibits PM when T 〉 275 K. The system transforms from spin-disordering paramagnetism to spin-ordering antiferromagnetism in the charge ordering state with the temperature decreasing from 275 K to 230 K. The long-range antiferromagnetism forms and AFM/CO states coexist between 230 K and 5 K. There is a little ferromagnetic component in the AFM/CO background in a low temperature range. When x = 0.12, the CO phase in the system has almost melted completely. There is a little remnant of the CO phase below 150 K. The system exhibits paramagnetism when T 〉 150 K and transforms from paramagnetism to ferromagnetism when T〈 150 K.     

Estimation for the number of components in a mixture model using stepwise split-and-merge EM algorithm

The main difficulty with EM algorithm for mixture model concerns the number of components, say g. This is the question of model selection, and the EM algorithm itself could not estimate g. On the contrary, the algorithm requires g to be specified before the remaining parameters can be estimated. To solve this problem, a new algorithm, which is called stepwise split-and-merge EM (SSMEM) algorithm, is proposed. The SSMEM algorithm alternately splits and merges components, estimating g and other parameters of components simultaneously. Also, two novel criteria are introduced to efficiently select the components for split or merge. Experimental results on simulated and real data demonstrate the effectivity of the proposed algorithm.     

Synthesis of selenium nanoparticles in the presence of silk fibroin

This paper describes a solution-phase approach to the synthesis of selenium nanoparticles by reducing selenious acid solution with ascorbic acid in the presence of silk fibroin. The monodispersed spherical selenium colloid particles obtained were very stable in silk fibroin solution and characterized by Atomic force microscopy and X-ray techniques. The influences of temperature and ultrasonication on the morphology of selenium nanoparticles were also discussed. The experiments showed that the selenium nanoparticles with various morphologies could be obtained under different temperatures and the appropriate ultrasonication time was 60 min. This result indicated that the silk fibroin molecules intimately associated with the surface of the selenium particles and controlled the growth particles.     

Analysis of dispersion characteristics for a circular dielectric waveguide with periodic metallic strips by using the method of lines

The dispersion characteristics of circular dielectric waveguide with periodic metallic strips are analyzed by the method of lines. The filter property of the metallic strip loaded structure is carefully investigated for both TE and TM modes. The brillioum diagrams for both TE₀₁ and TM₀₁ modes are given. A comparison is made between the results obtained by Galerkin's method and those calculated with the method of lines, and very good agreement has been found; the accuracy of the present method is thus justified. On the basis of the analysis, some useful guidelines for the design of the bandreject filters are suggested.