一种改进的背景提取算法

背景提取,是利用背景差分法获取目标的重要步骤。针对传统背景提取算法需要处理大数据量的问题,本文算法在传统背景提取算法的基础上,利用一段时间内,相邻图像相同位置的灰度值基本处在同一平稳区间的原理和思路,通过对小数据量的多次操作来获取背景图像。实验结果证明,这种做法可以在使用较少内存使用量的基础上获得比较好的效果,并可快速有效地对背景进行更新。     

MIMO系统中基于SLNR的用户调度准则

多用户MIMO系统中,基于SLNR（signal-to-leakage-and-noise,信漏噪比）的预编码方案能够同时考虑噪声和信号泄漏问题,不但提高了系统性能,同时降低了系统的复杂度,但要求基站同时服务的数据流数之和不得大于其发射天线数. 因此,当用户数较多时,需要进行用户调度. 基于SLNR的用户调度准则只需要知道其他用户的信道信息,并能够合理的选择用户,通过仿真得知,该调度准则能够使系统获得良好的性能.     

Studies on syntheses and properties of novel CeO2/polyimide nanocomposite films from Ce(Phen)3 complex

A series of cerium dioxide (CeO₂)/polyimide (PI) nanocomposites were successfully prepared from Ce(Phen)₃ and polyamic acid (PAA) via the solution direct-dispersing method, followed by a step thermal imidization process. TGA and XPS studies showed that the cerium complex decomposed to form CeO₂ during the thermal imidization process at 300 °C. SEM observation showed that the formed CeO₂ as nanoparticles was well dispersed in polyimide matrix with a size of about 50-100 nm for samples with different contents of CeO₂. Thermal analysis indicated that the introduction of CeO₂ decreased the thermal stability of nanocomposite films due to the decomposition of Ce(Phen)₃ in the imidization process, while the glass transition temperature (T_g) increased obviously, especially nanocomposite films with high loading of CeO₂ exhibited a trend of disappearance of T_g. DMTA and static tensile measurements showed that the storage modulus of nanocomposite films increased, while the elongation at break decreased with increasing CeO₂ content.     

Grafting polymerization of l-lactide on the surface of hydroxyapatite nano-crystals

A novel method of grafting ring-opening polymerization of l-lactide (LLA) onto the surface of hydroxyapatite nano-particles (n-HAP) was developed. PLLA was directly connected onto the HAP surface through a chemical linkage. The PLLA-g-HAP particles could be stably dispersed in organic solvent such as chloroform for several weeks. The n-HAP particles still retained the original dimension and shape after the grafting of PLLA. Compared with the ³¹P MAS-NMR spectrum of pure HAP powders, there appeared a downfield displacement of 1.2 ppm in the spectrum of PLLA-g-HAP. Fourier transformation infrared (FT-IR) spectra further confirmed the existence of PLLA on the surface of PLLA-g-HAP. The amount of grafted polymer determined by thermal gravimetric analysis (TGA) was about 6% in weight. The tensile strength and elongation at break of the PLLA/PLLA-g-HAP composite containing 8 wt% of PLLA-g-HAP were 55 MPa and about 10-13%, respectively, while those of the PLLA/n-HAP composites were 40 MPa and 3-5%, respectively.     

Chemical effects of cationic surfactant and anionic surfactant used in organically modified montmorillonites on degradation and fire retardancy of polyamide 12 nanocomposites

Three kinds of organically modified Na⁺-montmorillonites (OMMTs), including two kinds of octadecylammonium modified montmorillonite with different contents of octadecylammonium and a kind of sodium dodecylsulfonate (SDSo) modified montmorillonite, were used to prepare polyamide 12 (PA12)/OMMT nanocomposites. Effects of the modifiers on degradation and fire retardancy of PA12/OMMT nanocomposites were investigated. Acid sites formed in cationic surfactant modified MMT via Hoffman decomposition could accelerate degradation of PA12 at high temperature. However, catalytic effect of the acid sites on carbonization of the degradation products promoted char barrier formation, which reduced heat release rate (HRR). Higher content of cationic surfactant in OMMT is beneficial to fire retardancy of PA12 nanocomposites and the dispersion states of OMMT have assistant effects. In contrast, Na⁺-montmorillonite (Na-MMT) and anionic surfactant modified MMT (a-MMT) could not form acid sites on the MMT layers; in this case, fire retardancy of PA12/Na-MMT appears to have no improvement and PA12/a-MMT appears to have limited improvement.     

超声波测距的模糊控制泊车系统模型设计

设计了一种基于超声波测距的自动泊车系统模型。首先对小车运动模型进行分析,结合实际设计垂直、平行、斜行三种泊车模糊控制器,并且在Matlab的Simulink中分别进行仿真验证。采用超声波测距技术、视频采集技术等来获取周围环境数据,按照实际车辆和车库的大小,通过等比例缩放设计小车模型和车库模型,并把验证通过的模糊控制器转换为C代码,嵌入到飞思卡尔K60主控制板中进行自动泊车可行性测试。经测试,当模型车的航向角在-32°~+32°范围内时,实现了模型车在0.92倍标准大小模型车库内的自主泊车。     

基于手机定位功能的工程协同管理系统的应用与设计

该文通过对手机中的定位功能的深入开发,将该功能应用于工程施工中参建单位进行的协同工作的管理系统中,并将该管理系统与地图应用相结合,实现了协同管理的实时性与规范管理性,提高了工程施工进度与管理效率。     

B位掺杂钙钛矿结构化合物LaSr2Mn2-xFexO7的电磁性能

研究了以Fe离子(Fe3 )掺杂取代部分锰(Mn)离子的层状钙钛矿结构化合物LaSr2Mn2-xFexO7(O≤x≤O.3)的电性和磁性.结果发现:Fe3 的掺杂抑制了LaSr2Mn2-xFexO7低温的反铁磁性交换作用,使Neel温度TN由x=0的138K降至x=0.3的l0lK.同时,LaSr2Mn2-xFex07的自旋玻璃态、电荷有序和金属一绝缘体转变温度都由于Fe3 取代Mn离子而受到抑制.产生上述现象的原因是因为Mn位被取代导致产生无序状态.由于Fe3 取代Mn粒子,致使双交换作用通道被打破,化合物的电阻率随x的增加而迅速增加.所有化合物的电阻率在低温阶段都可以用Mott的变程跳跃理论来拟合;在高温阶段可以用最近小声子极化理论来拟合.     

Study on crystalline morphology of poly(l-lactide)-poly(ethylene glycol) diblock copolymer

Crystallization behavior, structural development and morphology evolution in a series of diblock copolymers of poly(l-lactide)-block-poly(ethylene glycol) (PLLA-b-PEG) were investigated via differential scanning calorimetry, wide-angle X-ray diffraction, polarized optical microscopy and atomic force microscopy. In these copolymers, both blocks are crystallizable and biocompatible. It was interesting that these PLLA-b-PEG diblock copolymers could form spherulites with banded textures, which was undercooling dependent. Single crystals with an abundance of screw dislocations were also observed via AFM. Such results indicated that these ringed spherulites and single crystals were formed during the crystallization of the PLLA blocks.     

基于RBF神经网络的瓦斯检测技术的研究

着重介绍红外探测系统的总体设计思想、微弱信号的检测技术及检测系统的软、硬件设计,对如何应用单片机ATMEGA16芯片作微控制器,来完成数据的采集、处理判断、数据的显示和传输等一系列功能作了重点的阐述和分析.针对目前大多数设备不具备数据传输这一特性,重点对RS485总线方式作了阐述,并采用了RBF神经网络的方法对温度进行了补偿,提高了测量精度,达到了理想的效果.