Numerical study on methane/air combustion characteristics in a heat-recirculating micro combustor embedded with porous media

Micro-combustor is a portable power device that can provide energy efficiently, heat recirculating is considered to be an important factor affecting the combustion process. For enhancing the heat recirculating and improving the combustion stability, we proposed a heat-recirculating micro-combustor embedded with porous media, and the numerical simulation was carried out by CFD software. In this paper, the effect of porous media materials, thickness and inlet conditions (equivalence ratio, inlet velocity) on the temperature distribution and exhaust species in the micro combustor are investigated. The results showed that compared with the micro combustor without embedded porous media (MCNPM), micro-combustor embedded with porous media (MCEPM) can improve the temperature uniformity distribution in the radial direction and strengthen the preheating capacity. However, it is found that the embedding thickness of porous media should be reasonably arranged. Setting the thickness of porous media to 15 mm, the combustor can obtain excellent comprehensive capacity of steady combustion and heat recirculating. Compared the thermal performance of Al₂O₃, SiC, and ZrO₂ porous media materials, indicating that SiC due to its strong thermal conductivity, its combustion stabilization and heat recirculating capacity are obviously better than that of Al₂O₃ and ZrO₂. With the porous media embedded in the micro combustor, the combustion has a tempering limit of more than 10 m/s, and the flame is blown out of the porous media area over 100 m/s. The reasonable equivalence ratio of CH₄/air combustion should be controlled within the range of 0.1–0.5, and “super-enthalpy combustion” can be realized.     

一种军棋机器博弈的多棋子协同博弈方法

针对在军棋博弈不完全信息对弈中，面对棋子不同价值、不同位置、不同搭配所产生的不同棋力，传统的单子意图搜索算法，不能满足棋子之间的协同性与沟通性，同时也缺乏对敌方的引诱与欺骗等高级对抗能力。本文提出一种结合UCT搜索策略的高价值棋子博弈方法，实现高价值棋子协同博弈的策略。实战经验表明:高价值多棋子军棋协同博弈策略优于单棋子军棋博弈策略。     

Flame inertia into lean region in stratified hydrogen mixture

In hydrogen engines, the direct-injection stratified charge system has the ability to realize a more lean operation than homogeneous charge systems. Flame propagation into the lean region in the stratified hydrogen mixture was investigated in this study. Hydrogen was injected into a lean hydrogen–air premixed mixture charge of the equivalence ratio of 0.074–0.257. This stratified hydrogen mixture was ignited by an electric spark. The flame generated in the hydrogen jet propagated into the lean premixed mixture charge as if it had “inertia”, even though the stoichiometry of the premixed mixture charge was less than the lower flammability limit. The amount of burned hydrogen in the case of a stratified mixture was greater than that in the case of the homogeneous mixture. The flame seems to be supported from behind by the burned gas in the rich region until the decay of this support.     

采用时间差分算法的九路围棋机器博弈系统

围棋机器博弈是机器博弈中重要的分支之一,其庞大的博弈空间给机器博弈研究者带来了巨大挑战.目前围棋机器博弈多采用静态估值搜索与蒙特卡洛树搜索,故将时间差分算法引入至九路围棋机器博弈系统中,提出基于时间差分算法的围棋机器博弈系统模型,该博弈系统具有一定的自学习能力,能在不断的对弈中逐步提高博弈能力.通过与采用α-β搜索算法的博弈系统进行实际对弈,证明了该方法的可行性.     

深入浅出讲解“Windows程序设计—Visual C++”课程

针对Windows程序设计——Visual C++课程涉及知识面广、实践性强、复杂难学的特点,分析了该课程难点之所在及传统教学过程中存在的问题,并从教学内容、教学方法和模式等方面采取了一些改革措施。实践证明,改革措施能够激发学生的编程兴趣,提高学生自主学习的能力,使学生较快进入状态,提高教学质量。     

基于xPC的气压ABS调节器动态参数测控系统开发

对反映气制动ABS调节器性能的静态参数和动态参数进行分析,提出基于xPC实时内核技术的动态数据采集系统设计;针对测试系统实现的关键技术进行了研究,主要包括测试软件界面设计及参数设置、通讯接口模块设计、数据实时保存与显示系统软件设计等;通过长期测试试验表明,系统采样频率可达1kHz,完全满足行业标准要求,从而证明系统开发的有效性和可靠性。     

Revealing Microstructural,Textural, and Hardness Evolution of Ti–6Al–4V Sheet Cooled From Sub β-Transus Temperature at Different Rates

Metallurgical and Materials Transactions A - A hot-rolled Ti–6Al–4V sheet was annealed at 960 °C (sub β-transus temperature) and then subjected to different coolings [in water...     

基于SOPC的高精度超声波温度计设计

根据在介质中超声波的传播速度随温度变化而变化的特点为设计原理,以基于Nios II处理器软核的可编程系统级芯片(SOPC)为控制核心,设计了高精度超声波温度计。在SOPC上同时实现了高频信号发生器模块、高速信号电路控制模块、信号自动采集控制模块以及Nios II软核处理器模块,缩小了体积,并降低了成本。传播时间的精确测量采用软件细分插补算法,经过理论分析和实验验证,该方法能够达到ns级超声波传播时间的测量,使设计的超声波温度计能够实现分辨率优于0.001℃的温度测量。     

卡尔曼滤波在时栅传感器动态标定系统中的应用

在时栅传感器误差曲线的动态自动标定中,利用软件实现卡尔曼滤波方法,以达到消除随机误差的目的。该方法在大幅度减少了标定所需时间的同时,进一步提高了动态标定精度。介绍了系统工作原理及卡尔曼滤波的实现方法。使用结果表明,采用该方法后自动测试效率和标定精度达到了预定的指标。