Size-controlled preparation of polyelectrolyte-protected gold nanoparticles by natural sunlight radiation

By radiating a linear polyethylenimine–HAuCl₄ aqueous solution with natural sunlight, we obtained polyelectrolyte-protected gold nanoparticles, and the size of such gold nanoparticles can be controlled by varying the molar ratio of polyelectrolyte to gold.     

Deformation behaviour of iron-doped alumina

Compressive creep tests in air were carried out on 1 cat.% Fe-doped alumina at a temperature T=1400 °C. Iron doping affected the plastic deformation by different ways in relation with Fe²⁺ cations population. Fe²⁺ cations sped up the deformation rates. FeAl₂O₄ spinel precipitates were identified and they were found (i) to interact with alumina grain boundaries (ii) to limit the grain growth within a range of strain. The Fe²⁺ cations underwent oxidation and this resulted in the dissolution of the some precipitates and in the decrease of deformation rates. It was suggested that deformation sped up this evolution through mass transport and that time was not a dominating parameter.     

垂直管吸收器内泡式吸收过程的数值研究

建立垂直管吸收器管内泡式吸收过程中传热传质的数学物理模型，对其泡式吸收过程进行数值研究，获得泡式吸收方式的一些传热传质特性，为吸收器的优化设计提供一定理论指导。     

真空冷冻干燥技术在三七加工中的应用

介绍了真空冷冻干燥的基本原理，并据三七的特点，探讨三七真空冷冻干燥的工艺流程及特点，简要分析了三七冷冻干燥的前景。     

基于湿度扩散理论的混凝土早期收缩分析

混凝土早期收缩开裂是加剧混凝土劣化并导致最终失效的一个重要因素．分析混凝土早期的自由收缩量值是进行收缩开裂研究的基础。为此，基于湿度扩散理论建立了混凝士早期的自生收缩与干燥收缩计算分析模型，经实例验证，计算结果与试验结果有较好的一致性。     

Development of the Embedded Protective Device Based on ARM

An embedded protective device for 35kV power line is worked out based on Philips＇ LPC2292 ARM MCU. Several aspects such as embedded design technique adopted in the system framework, application of adaptive theory in data acquisition, Board Support Packet （BSP） developing and task dispatching related to operating system are discussed. Both hardware and software framework of the system are given. Advanced hardware platform and software development environment is applied in design of the system, with the advanced co-design technology.     

Electrochemical characteristics of heme proteins in hydroxyethylcellulose film

A stable film made from hydroxyethylcellulose (HEC) on pyrolytic graphite (PG) electrode was employed for incorporating hemoglobin (Hb), myoglobin (Mb) and horseradish peroxidase (HRP), and the electrochemical characteristics of the proteins were studied correspondingly. Experimental results revealed that HEC film could greatly accelerate electron transfer between the proteins and electrode, and the proteins showed a thin layer electrochemical behavior in the film. Moreover, all the proteins in the film exhibited good catalytic activity towards the reduction of hydrogen peroxide (H₂O₂) in the low H₂O₂ concentration range. In the high concentration range, H₂O₂ would exhibit toxicity effect on the proteins. The electrochemical properties and electrocatalytic abilities of the three heme proteins in HEC film have been compared, and the optimal conditions for H₂O₂ biosensor fabrication have been obtained.     

Simulating Experiment for Temperature Field of Frozen Subgrade Using Regulation Tubes

The main factors that influence the temperature field of frozen subgrade were analyzed.The experimental equipment for simulating frozen subgrade was built up,and the declining regulating tubes were placed at the foot of the embankment. By means of this equipment two simulating experiments of controlling temperature filed of frozen subgrade were carried out in the laboratory. One method is to collect natural cold energy, and the other one is to collect natural cold energy ccompanied by artificial refrigeration simultaneously. The result indicates that the latter is an effective method for maintaining the stability of the frozen subgrade.     

FATIGUE CRACK GROWTH UNDER MODE II LOADING

Abstract— The behavior of fatigue crack growth for low and medium carbon steels, an austenitic stainless steel and an aluminum alloy under pure Mode II loading was investigated experimentally, using cruciform specimens. The results show that under pure Mode II loading, fatigue crack propagation has three possibilities, namely, bifurcation into two branches, propagation along the original Mode II direction, and the mixture of these two situations, depending on the material. The growth rate da/dN vs. ΔK_II relation for Mode II propagation is similar to a Pans type law for Mode I growth. Fractographic observations by optical microscopy and SEM were made also on all specimens tested. When a crack branched, striations parallel to the crack front which were often associated with Mode I fatigue crack growth were observed and long marks parallel to the crack propagation direction were also found for slanted fracture surfaces. When a crack propagated along the original Mode II direction, many frictional marks parallel to the crack propagation direction were observed.