Review of pulsed thermal NDT: Physical principles,theory and data processing

This paper summarizes the basics of pulsed thermal nondestructive testing (TNDT) including theoretical solutions, data processing algorithms and practical implementation. Typical defects are discussed along with 1D analytical and multi-dimensional numerical solutions. Special emphasis is focused on defect characterization by the use of inverse solutions. A list of TNDT terms is provided. Applications of active TNDT, mainly in the aerospace industry, are discussed briefly, and some trends in the further development of this technique are described.     

Compiler compatible 5.66 Mb/mm2 8T 1R1W register file in 14 nm FinFET technology

1-read/1-write (1R1W) register file (RF) is a popular memory configuration in modern feature rich SoCs requiring significant amount of embedded memory. A memory compiler is constructed using the 8T RF bitcell spanning a range of instances from 32 b to 72 Kb. An 8T low-leakage bitcell of 0.106 μm² is used in a 14 nm FinFET technology with a 70 nm contacted gate pitch for high-density (HD) two-port (TP) RF memory compiler which achieves 5.66 Mb/mm² array density for a 72 Kb array which is the highest reported density in 14 nm FinFET technology. The density improvement is achieved by using techniques such as leaf-cell optimization (eliminating transistors), better architectural planning, top level connectivity through leaf-cell abutment and minimizing the number of unique leaf-cells. These techniques are fully compatible with memory compiler usage over the required span. Leakage power is minimized by using power-switches without degrading the density mentioned above. Self-induced supply voltage collapse technique is applied for write and a four stack static keeper is used for read Vmin improvement. Fabricated test chips using 14 nm process have demonstrated 2.33 GHz performance at 1.1 V/25 °C operation. Overall V_min of 550 mV is achieved with this design at 25 °C. The inbuilt power-switch improves leakage power by 12x in simulation. Approximately 8% die area of a leading 14 nm SoC in commercialization is occupied by these compiled RF instances.     

基于压电陶瓷动态信息的结构裂纹识别方法

利用压电陶瓷的动态特性和压电系统的动态信息,对铝梁的裂纹损伤进行了分析研究。随着梁裂纹尺寸的增加,压电陶瓷片的导钠幅值下降,且系统固有频率减小。利用导钠幅值的变化和系统的动态信息,可以对裂纹的位置和尺寸大小进行识别。实验证明该方法的有效性。     

Tracking-error model-based predictive control for mobile robots in real time

In this paper, a model-predictive trajectory-tracking control applied to a mobile robot is presented. Linearized tracking-error dynamics is used to predict future system behavior and a control law is derived from a quadratic cost function penalizing the system tracking error and the control effort. Experimental results on a real mobile robot are presented and a comparison of the control obtained with that of a time-varying state-feedback controller is given. The proposed controller includes velocity and acceleration constraints to prevent the mobile robot from slipping and a Smith predictor is used to compensate for the vision-system dead-time. Some ideas for future work are also discussed.     

Improved Repeatability of Pulsed Field Magnetometry Measurements Through Peltier Effect Temperature Control of Measurement Coils

Pulsed Field Magnetometers (PFMs) offer a method for high speed full loop characterisation of hard magnetic materials. As there is no dependency on iron to close a circuit, the repeatability of the technique is good. By utilising Peltier effect techniques to control the temperature of the measurement coil systems employed in a Pulsed Field Magnetometer, the level of repeatability of measurements can be significantly improved.     

网络对抗训练混合虚拟化平台设计研究

讨论了虚拟化技术实现原理及其在网络对抗教学中的应用上,分析了各类虚拟化技术的优缺点和构建网络对抗训练环境存在的问题。提出了一种混合虚拟化平台设计,该平台利用Libvirt虚拟化的应用程序编程接口（API）调用两种虚拟化技术同时运行在同一物理主机上。并详细叙述了混合虚拟化平台的实现过程和方法,并在多个虚拟机内同时运行测试基准,分析其可扩展性。多种虚拟化技术在同一物理机上的混合,实现了复杂实验环境的创建,对构建大规模的网络实验平台具有一定的参考价值。