An ideal host-guest system to accomplish high-performance greenish yellow and hybrid white organic light-emitting diodes

Greenish yellow organic light-emitting diodes (GYOLEDs) have steadily attracted researcher's attention since they are important to our life. However, their performance significantly lags behind compared with the three primary colors based OLEDs. Herein, for the first time, an ideal host-guest system has been demonstrated to accomplish high-performance phosphorescent GYOLEDs, where the guest concentration is as low as 2%. The GYOLED exhibits a forward-viewing power efficiency of 57.0 lm/W at 1000 cd/m², which is the highest among GYOLEDs. Besides, extremely low efficiency roll-off and voltages are achieved. The origin of the high performance is unveiled and it is found that the combined mechanisms of host-guest energy transfer and direct exciton formation on the guest are effective to furnish the greenish yellow emission. Then, by dint of this ideal host-guest system, a simplified but high-performance hybrid white OLED (WOLED) has been developed. The WOLED can exhibit an ultrahigh color rendering index (CRI) of 92, a maximum total efficiency of 27.5 lm/W and a low turn-on voltage of 2.5 V (1 cd/m²), unlocking a novel avenue to simultaneously achieve simplified structure, ultrahigh CRI (>90), high efficiency and low voltage.     

Alloy optimisation of bainitic steel for large plastic mould

Based on the phase transformation theories, especially the T₀ concept of bainite transformation, alloy optimisation of bainitic steel with carbides has been carried out aiming at the produce of plastic mould with large cross-section. The effect of manganese and silicon on proeutectoid ferrite and bainite transformation is explored by dilatometric analysis, XRD and different microscopy techniques. The results show that after the alloy optimisation, the transformation of proeutectoid ferrite is suppressed and when the cooling rate is lower than 0·1°C?s^??1, the new lower bainite transformation appears by decreasing carbon capacity of austenite and promoting carbide precipitation. Industrial production proves that the optimised alloy SDP1 can meet the demand for the plastic mould with the thickness of 1050?mm.     

Using d-limonene as the non-aromatic and non-chlorinated solvent for the fabrications of high performance polymer light-emitting diodes and field-effect transistors

Aiming to environment protection, green solvents are crucial for commercialization of solution-processed optoelectronic devices. In this work, d-limonene, a natural product, was introduced as the non-aromatic and non-chlorinated solvent for processing of polymer light-emitting diodes (PLEDs) and organic field effect transistors (OFETs). It was found that d-limonene could be a good solvent for a blue-emitting polyfluorene-based random copolymer for PLEDs and an alternating copolymer FBT-Th₄(1,4) with high hole mobility (μ_h) for OFETs. In comparisons to routine solvent-casted films of the two conjugated polymers, the resulting d-limonene-deposited films could show comparable film qualities, based on UV–vis absorption spectra and observations by atomic force microscopy (AFM). With d-limonene as the processing solvent, efficient blue PLEDs with CIE coordinates of (0.16, 0.16), maximum external quantum efficiency of 3.57%, and luminous efficiency of 3.66 cd/A, and OFETs with outstanding μ_h of 1.06 cm² (V s)⁻¹ were demonstrated. Our results suggest that d-limonene would be a promising non-aromatic and non-chlorinated solvent for solution processing of conjugated polymers and molecules for optoelectronic device applications.     

Comparative analysis on performance of vertical drain improved clay deposit under vacuum or surcharge loading

This paper presents two well-instrumented large-scale field tests of PVD-improved soft soil with vacuum and surcharge preloading, respectively. The two large-scale field tests were conducted adjacent to each other with the same preload. A comparative analysis was performed to investigate the performance of subsoil (i.e., the ground settlement, the layered settlement, the lateral displacement of subsoil and pore water pressure) under vacuum preloading and equivalent surcharge preloading. Some design methods were verified based on the field data. Cone Penetration Tests (CPT) and Vane Shear Tests (VST) were conducted to assess the improvement effects on subsoil after preloading. The results showed that as compared with surcharge preloading, vacuum preloading mitigated the differential settlement of the ground. The vacuum pressure transmitted into the soil with a minor loss through the PVD length. From a practical point of view, the improvement effects by vacuum preloading and surcharge preloading were similar in terms of influence depth and soil strength based on the in-situ tests.     

Investigation of performance variations due to the amplitude of group-delay ripple in chirped fiber Bragg gratings

We measure the system impacts due to the amplitude of group-delay (GD) ripple in single and cascaded chirped fiber Bragg gratings (CFBGs). Signals with smaller pulse width result in smaller performance variation at the same data rate. A 65-ps peak-to-peak GD ripple induces 0.9, 1.7, and 2.7 dB maximum penalties for 10, 20, and 40-Gb/s, respectively. We also find that cascading gratings with random ripple causes much less degradation than cascading gratings with the same ripple profile.     

基于实际井眼轨迹的抽油杆柱API设计方法

目前的抽油杆柱设计方法大都基于设计井眼轨迹或经验公式，因此设计的抽油杆柱与井眼的匹配性并没有达到最优，结果可能影响了抽油杆柱的受力特性和寿命。概述了目前现有的抽油杆柱设计方法，提出了基于实际井眼轨迹的抽油杆柱API设计方法，即考虑到在三维空间中井下粘滞阻力及动载的影响，利用微单元分析方法计算出轴向载荷与轴向应力，然后在此基础上进行杆柱组合设计，并给出了设计流程。以江苏油田永21-3井为例，对几种设计方法的设计结果进行了对比分析，结果表明，江苏油田目前采用的抽油杆柱设计方法包含了人为经验因素，并不是最优的杆柱设计结果，有待进一步改进。     

Steady-state response of the parametrically excited axially moving string constituted by the Boltzmann superposition principle

Summary.  The steady-state transverse vibration of a parametrically excited axially moving string with geometric nonlinearity is investigated in this paper. The Boltzmann superposition principle is employed to characterize the material property of the string. The method of multiple scales is applied directly to the governing equation, which is a nonlinear partial-differential-integral equation. The solvability condition of eliminating the secular terms is established. Closed form solutions for the amplitude and the existence conditions of nontrivial steady-state response of the summation resonance are obtained. Some numerical examples showing effects of the viscoelastic parameter, the amplitude of excitation, the frequency of excitation, and the transport speed are presented. Received February 12, 2002; revised October 25, 2002 Published online: May 8, 2003 The research was supported by the National Natural Science Foundation of China (Project No. 10172056).     

Silver nanocluster formation in silicate glass by single step ion-exchange

We report the formation of silver nanoclusters of average size ∼ 1.1 nm in a single step ion-exchanged silica glass. Silver clusters are formed in a glass during ion-exchange by fine-tuning the ion-exchange parameters such as salt composition, temperature and time. Such nanocluster formation during ion-exchange preserves the waveguiding properties of the ion-exchanged surface of the glass making them suitable for nonlinear waveguide device fabrication.     

Numerical investigation of thermo-bioconvection in a suspension of gravitactic microorganisms

This paper investigates the effect of heating or cooling from below on the development of gravitactic bioconvection in a square enclosure with stress free sidewalls. The governing equations are the Navier–Stokes equations with the Boussinesq approximation, the diffusion equation for the motile microorganism and the energy equation for the temperature. The control volume method is used to solve numerically the complete set of governing equations. It was found that the suspension is destabilized by heating from below and stabilized by cooling from below. A transition from a subcritical bifurcation to a supercritical bifurcation was observed in the case of heating from below when the thermal Rayleigh number was increased.