Error diffusion in cell-oriented Fourier-transform computer-generated holograms to compensate for printing constraints

Abstract

Error-diffused quantization has been applied to the generation of cell-oriented computer-generated Fourier transform holograms, resulting in reduced reconstruction errors. Improvements are demonstrated when applied to the algorithms of Lohmann, Lee and Burckhardt after invoking realistic constraints on the minimum size of the printable spot for an electrophotographic laser printer.     

Temperature effect on polaron recombination in conjugated polymers

The microcosmic mechanism of electroluminescence in polymer light emitting diodes (PLEDs) is the recombination of the oppositely charged polarons. In previous studies, it has been demonstrated that the temperature-induced irregular lattice vibration may have non-negligible influence on polaron dynamics. Nevertheless, there are few reports about thermal effect on recombination process between polaron pair, although it is very important for the performance of PLEDs. In this paper, we adopt the modified one-dimensional tight-binding model, including to which the thermal random force, and explore the temperature effect on polaron collision driven by electric field with different strengths. The dynamical simulation is performed by using the non-adiabatic evolution method. The results show that under the influence of electric field, the oppositely charged polarons could recombine into either an exciton with one lattice distortion, or the mixed state of polaron pair and exciton with two lattice distortions. It depends on both field strength and temperature. Anyway, after including temperature effect, a significant improvement of exciton yield is obtained. In addition, the new-formed exciton could perform a random walk along the polymer chain driven by the thermal random force when its strength is large enough. If we further increase the temperature, the stability of exciton would become worse.     

Synthesis of chiral benzene-based tetraoxazolines and their application in asymmetric Friedel–Crafts alkylation of indole derivatives with nitroalkenes

A series of new chiral benzene-based tetraoxazoline ligands were prepared in good yields through the reaction of 1,2,4,5-benzenetetracarboxylic acid and chiral β-amino alcohols by continuous removal of water, and the asymmetric Friedel–Crafts alkylation of indole derivatives with nitroalkenes was tested using the chiral catalysts, which were generated in situ by refluxing the above ligands and anhydrous zinc chloride in solvent. In most case, good yields (up to 99%) and excellent enantioselectivities (up to 98% ee) were obtained.     

A novel intramolecular charge transfer blue fluorophor for high color stability hybrid di-chromatic white organic light-emitting diodes

A novel intramolecular charge transfer (ICT) based blue fluorophor, 5,11-di(40-dimesitylboronphenyl)indolo[3,2-b]carbazole(DDBICZ), possessing a high fluorescent quantum yield of 0.52, a high triplet energy level (2.59 eV), and an intriguing bipolar charge transporting ability, was used as a highly efficient blue fluorophor and a host for a yellow phosphor. Doping a yellow phosphor(bis(2-(3-trifluoromethyl-4-fluorophenyl)-4-methylquinolyl)(acetyl-acetonate)iridium(III) (Ir(ffpmq)₂(acac)) in the host DDBICZ, a simplified fluorescence/phosphorescence (F/P)-based hybrid white organic light-emitting diode (WOLED) with a symmetrical BYB-EML of DDBICZ (10 nm)/DDBICZ: 6 wt% Ir(ffpmq)₂(acac) (10 nm)/DDBICZ (10 nm) is demonstrated. The hybrid WOLED exhibits excellent high color stability and good color quality. Under wide operating voltage range from 5 V to 10 V, the Commission Internationale de L'Eclairage (CIE) coordinates of the hybrid WOLED only change from (0.35, 0.36) to (0.34, 0.35), with a high color rending index (CRI) of 79–81. The high color stability is due to the fact that the BYB-EML effectively offsets the change of emission intensity from different emitters caused by the shift of carrier recombination zone with the increase of voltage. In addition, the hybrid WOLED also reveals a considerable current efficiency of 24.4 cd/A. These results demonstrate that efficient F/P hybrid WOLEDs with high color stability could be achieved by such simple BYB-EML structure using single-dopant strategy.     

Survival of Bifidobacterium strains in organic fermented milk is improved as a result of membrane fatty acid composition

Survival of three Bifidobacterium strains in organic and conventional fermented milks in relation to their membrane fatty acid composition was studied during chilled storage. Survival of Bifidobacterium lactis BB12 and BL04 over 21 days at 4 °C was improved in organic fermented milks, whereas these parameters were less effective for Bifidobacterium infantis ATCC15697. These different behaviours were linked to acidification activity, oxidoreduction potential and relative fatty acid composition, which differed among the strains and the types of milk used. The higher relative unsaturated fatty acid content in organic products, including trans-vaccenic, conjugated linoleic and α-linolenic acids, resulted in an increase in the linoleic and α-linolenic acid content in the cell membranes of B. lactis BB12 and BL04. The study showed that the membrane fatty acid composition, which depended on the strain and on the milk fatty acid composition, affected the survival of bifidobacteria during chilled storage in fermented milk products.     

Source cell-phone recognition from recorded speech using non-speech segments

In a recent study, we have introduced the problem of identifying cell-phones using recorded speech and shown that speech signals convey information about the source device, making it possible to identify the source with some accuracy. In this paper, we consider recognizing source cell-phone microphones using non-speech segments of recorded speech. Taking an information-theoretic approach, we use Gaussian Mixture Model (GMM) trained with maximum mutual information (MMI) to represent device-specific features. Experimental results using Mel-frequency and linear frequency cepstral coefficients (MFCC and LFCC) show that features extracted from the non-speech segments of speech contain higher mutual information and yield higher recognition rates than those from speech portions or the whole utterance. Identification rate improves from 96.42% to 98.39% and equal error rate (EER) reduces from 1.20% to 0.47% when non-speech parts are used to extract features. Recognition results are provided with classical GMM trained both with maximum likelihood (ML) and maximum mutual information (MMI) criteria, as well as support vector machines (SVMs). Identification under additive noise case is also considered and it is shown that identification rates reduces dramatically in case of additive noise.     

Modified relative arrival time technique for sizing inclined cracks

In this paper, a modified relative time technique is proposed for estimating the length and the orientation of inclined cracks using ultrasonic B-scan signals. The proposed technique utilizes the relative position of the tip diffraction echo to the corner reflection echo in an ultrasonic B-scan image to estimate the crack length and the crack inclination angle. Both finite element simulated signals and experimental signals, which are obtained from a specimen with a 3 mm crack with different inclination angles, are used to evaluate the estimation error of the proposed technique. The results show that the proposed technique overcomes the shortcoming of the conventional relative arrival time technique in sizing inclined cracks.     

“Measurement” and related concepts. Their interpretation in the VIM

The paper comments on the definitions of such terms as “measurement,” “nominal property,” “metrological traceability,” and others given in the 3-rd edition of International Vocabulary of Metrology (VIM). Proposals are offered for amendments to the terminology of the next edition of the VIM, taking into account new fields where measurements are applied.     

Superhydrophobic concrete surfaces with integrated microtexture

Ultra-High Performance Concrete (UHPC) is characterized by a densely packed mix-design, which can offer attractive surface properties for architectural building facades. A technical challenge for aesthetic applications is the protection against fouling. This work demonstrates that water-repellent concrete can be obtained just after demoulding by replicating the features of micro-pillared moulds made of polydimethylsiloxane (PDMS). Moreover, the negative replica of the microtextured UHPC surface can be used as a master to template for other UHPC samples, constituting a cost-effective route to fabricate large-scale microtextured concrete pieces. The chemical functionalization of UHPC with a low surface energy material is obtained by transferring residues from the PDMS mould or by spraying siloxane-based compounds to form a homogenous surface film. The latter preparation method showed superhydrophobic properties with static contact angles reaching up to 164° and contact angle hysteresis reaching as low as 2.5°. This process enables the manufacture of water-repelling, self-cleaning concrete. Raindrops slide off the concrete surface, carrying debris away.     

A 5-GHz LC VCO with digital AAC and AFBS for 2.4 GHz ZigBee transceiver applications

A 5 GHz LC VCO (voltage-controlled oscillator) with automatic amplitude control (AAC) and automatic frequency-band selection (AFBS) for 2.4 GHz ZigBee transceivers is presented. Instead of continuous feedback loop, an alternative amplitude calibration scheme is proposed in this paper to alleviate the deficiencies inherent in the conventional approach. It helps to keep the VCO at optimum amplitude to avoid saturation of the cross-coupled transistors and therefore stabilizes the phase noise performance over process, voltage and temperature variations. For the ZigBee application with 16 frequency channels, a coarse tuning loop is added in this work to implement the frequency-band selection using the AFBS mechanism. The VCO core and the digital AAC, AFBS modules have been fully integrated in a 2.4 GHz ZigBee transceiver which was fabricated in a 0.18 μm RF-CMOS technology. The current consumption is 4.7 mA at 4.85 GHz with 1.8 V power supply and a chip area of about 0.285 mm² is occupied. The VCO is capable of operating from 4.67 GHz to 5.18 GHz and the measured phase-noise level is –120 dBc/Hz at 1 MHz offset from a 4.85 GHz carrier. The tuning sensitivity K_VCO of the VCO is about 78 MHz/V with 0.9 V control voltage.