Evaporation from non-spherical particles: the equivalent-volume and inscribed sphere approximations for nearly spherical particles

Although numerical results for evaporation rates from arbitrarily shaped particles have been recently reported in the literature, it remains of interest to explore construction and accuracy of approximate analytical expressions that are simple and of general use. We have analyzed the popular equivalent-volume approximation and also the inscribed sphere approximations in this context, using a technique due to Zhang and Stone (J. Fluid Mech. 367 (1998) 329) who had studied rotatory oscillations of nearly spherical bodies. Comparison of the approximate results with accurate numerical results shows that both these approximations are quite useful. The equivalent-volume sphere approximation is particularly attractive as the error is of the order ε², where ε is a measure of departure from the spherical shape.     

Interlaboratory Assessment of Dried Blood Spot Fatty Acid Compositions

Dried blood spots for fatty acid profiling are increasing in popularity; however, variability in results between laboratories has not been characterized. Whole blood from two subjects (low and high n-3 polyunsaturated fatty acid [PUFA] status) was collected, 25 μL applied to butylated hydroxytoluene (BHT)-treated chromatography strips, dried in air, and shipped to five laboratories. Results were reported as “routine” (typical fatty acids for each laboratory) or “standardized” (a set of 19 fatty acids), and outliers and variability (%CV) were determined. Five and eight outliers of a possible 91 measures each were identified by routine and standardized reporting, respectively, including eicosapentaenoic acid (EPA, 20:5n-3) in the low n-3 PUFA sample and arachidonic acid in the high n-3 PUFA sample. By standardized reporting, no outliers were identified for EPA or docosahexaenoic acid (DHA, 22:6n-3), and %CV decreased from 8.6% to 6.0% and 9.1% to 6.6% for EPA and 10.5% to 7.2% and 10.5% to 6.6% for DHA in the low and high n-3 PUFA sample, respectively. In conclusion, fatty acid profiles yielded few outliers, and standardization of reporting reduced the variability between laboratories.     

Chromosome instability and unusual features of some widely used strains of Candida albicans

Electrophoretic karyotyping of the Candida albicans revealed a different migration pattern of ChR in three different stocks of the sequencing strain SC5314. In one stock, the high instability of ChR size prevented the migration of ChR as a compact band; ChR appeared, instead, as a smear. In some stocks, ChR and/or Ch1 ploidy diminished, suggesting mixed populations of disomic and monosomic cells. Similarly, some stocks of widely used derivatives CAI4 and BWP17 contained smearing of ChR. In addition, the most manipulated strain in the lineage of SC5314, the last derivative, BWP17, acquired an increase in the size of Ch7b and revealed an unusual property. BWP17 did not tolerate a well-established procedure of telomere-mediated fragmentation of a chromosome; the remaining intact homologue always duplicated. We suggest that some stocks of SC5314 are unstable and that BWP17 may not be appropriate for general studies. Instead of BWP17 or CAI4, we recommend using for general research CAF4-2, which is a relatively stable Ura- derivative, and which has been successfully used for more than a decade in our laboratory.     

3D printing hybrid organometallic polymer‐based biomaterials via laser two‐photon polymerization

Materials with microscale structures are gaining increasing interest due to their range of technical and medical applications. Additive manufacturing approaches to such objects via laser two‐photon polymerization, also known as multiphoton fabrication, enable the creation of new materials with diverse and tunable properties. Here, we investigate the properties of 3D structures composed of organometallic polymers incorporating aluminium, titanium, vanadium and zirconium. The organometallic polymer‐based materials were analysed using a variety of techniques including SEM, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy analysis and contact angle measurements and their biocompatibility was tested in vitro. Cell viability and mode of death were determined by 3‐(4,5‐dimethyl‐2‐thiazolyl)‐2,5‐diphenyl‐2H‐tetrazolium bromide (MTT) assay and acridine orange/ethidium bromide staining. Polymers incorporating Al, Ti and Zr supported cell adhesion and proliferation, and showed low toxicity in vitro, whereas the organometallic polymer incorporating V was shown to be cytotoxic. Inductively coupled plasma optical emission spectrometry suggested that leaching of the V from the organometallic polymer is the likely cause of this. The preparation of the organometallic polymers is straightforward and both simple 2D and complex 3D structures can be fabricated with ease. Resolution tests of the newly developed organometallic polymer incorporating Al show that suspended lines with widths down to 200 nm can be fabricated. We believe that the materials described in this work show promising properties for the development of objects with sub‐micron features for biomedical applications (e.g. biosensors, drug delivery devices, tissue scaffolds etc.). © 2019 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Deep blue/ultraviolet microcavity OLEDs based on solution-processed PVK:CBP blends

There is an increasing need to develop stable, high-intensity, efficient OLEDs in the deep blue and UV. Applications include blue pixels for displays and tunable narrow solid-state UV sources for sensing, diagnostics, and development of a wide band spectrometer-on-a-chip. With the aim of developing such OLEDs we demonstrate an array of deep blue to near UV tunable microcavity (μc) OLEDs (λ ∼373–469 nm) using, in a unique approach, a mixed emitting layer (EML) of poly(N-vinyl carbazole) (PVK) and 4,4′-bis(9-carbazolyl)-biphenyl (CBP), whose ITO-based devices show a broad electroluminescence (EL) in the wavelength range of interest. This 373–469 nm band expands the 493–640 nm range previously attained with μcOLEDs into the desired deep blue-to-near UV range. Moreover, the current work highlights interesting characteristics of the complexity of mixed EML emission in combinatorial 2-d μcOLED arrays of the structure 40 nm Ag/x  nm MoO_x/∼30 nm PVK:CBP (3:1 weight ratio)/y  nm 4,7-diphenyl-1,10-phenanthroline (BPhen)/1 nm LiF/100 nm Al, where x = 5, 10, 15, and 20 nm and y = 10, 15, 20, and 30 nm. In the short wavelength μc devices, only CBP emission was observed, while in the long wavelength μc devices the emission from both PVK and CBP was evident. To understand this behavior simulations based on the scattering matrix method, were performed. The source profile of the EML was extracted from the measured EL of ITO-based devices. The calculated μc spectra indeed indicated that in the thinner, short wavelength devices the emission is primarily from CBP; in the thicker devices both CBP and PVK contribute to the EL. This situation is due to the effect of the optical cavity length on the relative contributions of PVK and CBP EL through a change in the wavelength-dependent emission rate, which was not suggested previously. Structural analysis of the EML and the preceding MoO_x layer complemented the data analysis.     

Determinants of social gratifications obtained by older adults moderated by public supports for Internet access in Spain

As the standard of living constantly improves, and as life expectancy increases in developed countries, the number of adults who want to have a gratifying life increases as well. Furthermore, although the Internet offers a world of potentially rewarding experiences, there is much heterogeneity among older people with respect to those who are able to benefit from its use. To reduce this gap, public access and digital literacy programs have been implemented. The aim of the study was to find out the extent to which these programs moderate the effects of age and socioeconomic status on social access to and use of the Internet in a sample of older users in Spain. Through quota sampling of retired users over 54 years of age in Spain (N = 560), who were regular users of public supports for Internet access, a structural equation modeling and multi-group analysis was conducted. The data showed a staggered association of access indicators (physical access, digital skills and social e-activities) on the social gratifications obtained, as well as the moderating role of institutional supports. This study provides empirical evidence of the ability of public supports to moderate the effect of socioeconomics inequalities on access and social exploitation of the Internet by older people. The findings point to the need to strengthen digital literacy actions, especially in supports that are more sensitive to the effect of age and socio-economic status.     

Factors associated with patient-reported midday fogging in established scleral lens wearers

PurposeTo estimate the prevalence of patient-reported midday fogging and to identify risk factors for midday fogging.MethodA multicenter, cross-sectional study was conducted with an electronic survey that was distributed to scleral lens practitioners. The survey asked them to describe their most recently examined established scleral lens patient. Respondents provided data about patient-reported midday fogging, patient demographic characteristics, indication for lens wear, lens-wearing schedule, lens design, and care products.ResultsOf the 248 survey respondents who indicated whether their patients had midday fogging, 64 (25.8 %) had patients who self-reported such issues. Midday fogging was not associated with demographic characteristics (age, sex, race/ethnicity), indications for scleral lens wear, mean lens diameter (P = .30), haptic design (P = .29), use of a daily cleaner (P = .12), disinfection/storage solution used (P = .71), or filling solution (P = .65). Patients who reported midday fogging more commonly reported redness or irritation associated with scleral lens wear compared with those who did not experience midday fogging (P = .03).ConclusionsPrevalence of midday fogging in this study was similar to previously reported rates. No specific lens design or care product was associated with patient-reported midday fogging. If inflammatory mediators are elevated in the postlens fluid reservoir of patients with midday fogging, as previously described, the redness or irritation associated with scleral lens wear suggests that ocular surface inflammation may be contributing to this phenomenon.     

Highly stable and high power efficiency tandem organic light-emitting diodes with transition metal oxide-based charge generation layers

Tandem organic light-emitting diodes (OLEDs) have been studied to improve the long-term stability of OLEDs for 10 years. The key element in a tandem OLEDs is the charge generation layer (CGL), which provides electrons and holes to the adjacent sub-OLED units. Among different types of CGLs, n-doped electron transporting layer (ETL)/transition metal oxide (TMO)/hole transporting layer (HTL) has been intensively studied. Past studies indicate that this kind of CGL can achieve the desired efficiency enhancement, however, its long-term stability was reported not good and sometime even poor than a single OLED. This issue was not well addressed over the past 10 years. Here, for the first time, we found that this is caused by the unwanted diffusion of TMO into the underlying n-doped ETL layer and can be well resolved by introducing an additional diffusion suppressing layer (DSL) between them. Our finding will fully release the potential of TMO-based CGL in tandem OLEDs.