Compiler compatible 5.66 Mb/mm2 8T 1R1W register file in 14 nm FinFET technology

1-read/1-write (1R1W) register file (RF) is a popular memory configuration in modern feature rich SoCs requiring significant amount of embedded memory. A memory compiler is constructed using the 8T RF bitcell spanning a range of instances from 32 b to 72 Kb. An 8T low-leakage bitcell of 0.106 μm² is used in a 14 nm FinFET technology with a 70 nm contacted gate pitch for high-density (HD) two-port (TP) RF memory compiler which achieves 5.66 Mb/mm² array density for a 72 Kb array which is the highest reported density in 14 nm FinFET technology. The density improvement is achieved by using techniques such as leaf-cell optimization (eliminating transistors), better architectural planning, top level connectivity through leaf-cell abutment and minimizing the number of unique leaf-cells. These techniques are fully compatible with memory compiler usage over the required span. Leakage power is minimized by using power-switches without degrading the density mentioned above. Self-induced supply voltage collapse technique is applied for write and a four stack static keeper is used for read Vmin improvement. Fabricated test chips using 14 nm process have demonstrated 2.33 GHz performance at 1.1 V/25 °C operation. Overall V_min of 550 mV is achieved with this design at 25 °C. The inbuilt power-switch improves leakage power by 12x in simulation. Approximately 8% die area of a leading 14 nm SoC in commercialization is occupied by these compiled RF instances.     

High birefringence photonic bandgap fiber with elliptical air holes

In this paper, we proposed a high birefringence photonic bandgap fiber (PBGF) with elliptical air holes in cladding and circular air hole in core. The forbidden gaps of the honeycomb structure are calculated when the circular air holes are deformed to the elliptical shape. And the birefringence of the PBGFs is investigated by using a full-vector finite element method (FEM) and the numerical results are presented.     

OFDM系统中同步算法的FPGA 实现

给出了一种用于 OFDM 系统中可同时完成帧起始位置估计和载波频偏估计／补偿的同步算法及其 FPGA 实现方法。采用量化的方法对该不需要额外同步序列的估计算法进行了改进,提高了载波频偏的估计精度,并在数字域进行了频偏校正。在硬件实现上,利用 CORDIC 算法能够有效计算三角函数的特点,把频偏估计和频偏校正过程中的反正切运算和角度旋转操作转化成加法和移位操作,实现了计算精度、运算速度和硬件资源利用三方面性能的兼顾。     

微带型Wilkinson功分器设计与实现

小型低功耗器件是射频电路设计的研究热点,而微带技术具有小型化低功耗的优点,为此在介绍微带型Wilkin-son功分器工作原理的基础上,使用基于矩量法的ADS软件设计、仿真和优化计算相关数据参数,并制作了一个微带功分器实例,最后对加工的样品进行实测,获得与仿真值吻合较好的预期结果。     

Parameters evaluation of SOLA algorithm for time scale modification

Successful operation of the Synchronous Overlap and Add (SOLA) algorithm for Time Scale Modification (TSM) of speech is closely tied to the proper choice of parameters. This paper investigates the quality of time scale modified speech under different values of primary parameters. Based on Mean Opinion Score (MOS) tests and Bark Spectral Distortion (BSD) measure, the proper choices of synthesis shift (Ss) and the duration of the shift search interval (K _max?) are given experimentally. The conclusions can be helpful for operating the SOLA algorithm for time scale modification of speech.     

3D polymeric microfluidic device fabrication via contact liquid photolithographic polymerization (CLiPP)

In this contribution, a new method for the fabrication of complex polymeric microfluidic devices is presented. The technology, contact liquid photolithographic polymerization (CLiPP), overcomes many of the drawbacks associated with other rapid prototyping schemes, such as limited materials choices and time-consuming microassembly protocols. CLiPP shares many traits with other photolithographic methods, but three distinct features: (i) liquid photoresists in contact with the photomask, (ii) readily removed sacrificial materials, and (iii) living radical processes, enable multiple polymeric chemistries and mechanical properties while simultaneously enabling facile fabrication of 3D geometries and surface chemistry control. This contribution details fabrication techniques and methods for the fabrication of high aspect ratio posts covalently bonded to a polymeric substrate, an array of independently stacked bars on top of perpendicular bars, multiple undercut structures fabricated simultaneously, and a complex 3D geometry with intertwined channels.     

光电双基区晶体管(PDUBAT)的器件模型

本文在考虑了晶体管的小注入效应和大注入效应以及基区宽变效应等因素后,首次用近似和简化的数学表示式和相应的等效电路,描述了光电双基区晶体管(PDUBAT)负阻形成的机理并使负阻区和谷值区的理论计算和实验结果一致性很好.     

Performance of miniaturized direct methanol fuel cell (DMFC) devices using micropump for fuel delivery

A fuel cell is a device that can convert chemical energy into electricity directly. Among various types of fuel cells, both polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) can work at low temperature (<80 °C). Therefore, they can be used to supply power for commercial portable electronics such as laptop computers, digital cameras, PDAs and cell phones. The focus of this paper is to investigate the performance of a miniaturized DMFC device using a micropump to deliver fuel. The core of this micropump is a piezoelectric ring-type bending actuator and the associated nozzle/diffuser for directing fuel flow. Based on the experimental measurements, it is found that the performance of the fuel cell can be significantly improved if enough fuel flow is induced by the micropump at anode. Three factors may contribute to the performance enhancement including replenishment of methanol, decrease of diffusion resistance and removal of carbon dioxide. In comparison with conventional mini pumps, the size of the piezoelectric micropump is much smaller and the energy consumption is much lower. Thus, it is very viable and effective to use a piezoelectric valveless micropump for fuel delivery in miniaturized DMFC power systems.     

An efficient face segmentation algorithm based on binary partition tree

This paper presents an efficient face segmentation algorithm based on binary partition tree. Skin-like regions are first obtained by integrating the results of pixel classification and watershed segmentation. Facial features are extracted by the techniques of valley detection and entropic thresholding, and are used to refine the skin-like regions. In order to segment the facial regions from the skin-like regions, a novel region merging algorithm is proposed by considering the impact of the common border ratio between adjacent regions, and the binary partition tree is used to represent the whole region merging process. Then the facial likeness of each node in the binary partition tree is evaluated using a set of fuzzy membership functions devised for a number of facial primitives of geometrical, elliptical and facial features. Finally, an efficient algorithm of node selecting in the binary partition tree is proposed for the final face segmentation, which can exactly segment the faces without any underlying assumption. The performance of the proposed face segmentation algorithm is demonstrated by experimental results carried out on a variety of images in different scenarios.     

Automated clustering to support the reflexion method

A significant aspect in applying the Reflexion Method is the mapping of components found in the source code onto the conceptual components defined in the hypothesized architecture. To date, this mapping is established manually, which requires a lot of work for large software systems. In this paper, we present a new approach, in which clustering techniques are applied to support the user in the mapping activity. The result is a semi-automated mapping technique that accommodates the automatic clustering of the source model with the user’s hypothesized knowledge about the system’s architecture.This paper describes three case studies in which the semi-automated mapping technique, called HuGMe, has been applied successfully to extend a partial map of real-world software applications. In addition, the results of another case study from an earlier publication are summarized, which lead to comparable results. We evaluated the extended versions of two automatic software clustering techniques, namely, MQAttract and CountAttract, with oracle mappings. We closely study the influence of the degree of completeness of the existing mapping and other controlling variables of the technique to make reliable suggestions.Both clustering techniques were able to achieve a mapping quality where more than 90% of the automatic mapping decisions turned out to be correct. Moreover, the experiments indicate that the attraction function (CountAttract′) based on local coupling and cohesion is more suitable for semi-automated mapping than the approach MQAttract′ based on a global assessment of coupling and cohesion.