全新设计的光缆钢丝铠装高速成缆机

主要介绍新型光缆钢丝铠装高速成缆机的总体设计、布局、参数、结构特点。     

焊接方法对双相不锈钢焊接接头力学性能的影响

研究了不同焊接方法对SAF2205双相不锈钢板焊接接头金相组织和力学性能的影响,结果表明,采用不同焊接方法得到的焊接接头的铁素体与奥氏体两相比例不同,使焊接接头的力学性能存在较大差异,对实际生产中SAF2205双相不锈钢的焊接具有一定的指导意义。     

25mm厚钢板产生层间撕裂的原因和防治

层间撕裂并非是厚板独有的质量问题 ,结合工程实例 ,分析 2 5mm厚低合金钢板产生层间撕裂的原因。通过对钢材的超声波探伤检测、化学成分分析和Z向性能检测 ,指出层间撕裂主要与节点设计不当和钢材内非金属夹杂物偏析、分层有关 ,并提出了预防措施。对产生裂纹的构件视严重情况提出了不同的修补处理方法     

P、V操作的新探讨

P、V操作的概念以及使用在操作系统中非常重要、这里从一些新颖的角度来分析P、V操作，用P、V操作来实现进程的同步与互斥以及一种简单易行的逻辑关系则可以解决P操作嵌套时的执行次序。     

汽车发动机电机铁芯用钢(ADW2)的研制开发

鞍钢研制开发的汽车发动机启动电机用钢是针对汽车电机铁芯用钢（定、转子）而开发的电机钢类产品。介绍了该产品的研制过程及规格、特点。通过批量试制及装机试验，产品巳满足用户的使用要求。     

Numerical Modeling of Silicon Photodiodes for High-Accuracy Applications Part I. Simulation Programs

The suitability of the semiconductor-device modeling program PC-1D for high-accuracy simulation of silicon photodiodes is discussed. A set of user interface programs optimized to support high-accuracy batch-mode operation of PC-1D for modeling the internal quantum efficiency of photodiodes is also described. The optimization includes correction for the dark current under reverse- and forward-bias conditions before calculating the quantum efficiency, and easy access to the highest numerical accuracy available from PC-1D, neither of which is conveniently available with PC-1D’s standard user interface.     

弹簧钢棒线材质量投诉的分析研究

为分析研究某特钢厂用户投诉的原因及存在的问题，统计了其两年间的弹簧钢棒线材用户质量投诉，从缺陷类型及生产过程控制进行了分析，重点对多起断裂原因不明的投诉进行了深入的失效研究。结果表明，弹簧钢生产厂在设备工艺、过程控制和管理中存在很多不足，加上用户的使用工艺、材料的内外质量和规格等综合因素导致了材料的断裂失效。     

Action of chelators on solid iron in phosphate-containing aqueous solutions

To study the effect of strong iron-ligands on steel corrosion, mild steel electrodes were immersed in solutions containing 20 mM phosphate buffer (pH=7.2) and between 0.01 mM and 1 M of either the iron(II)-chelators 2,2^′-bipyridine or FerroZine, or the iron(III)-chelators citrate or acetylacetonate. Resulting surface reactions were investigated by quantifying the electrochemical potential (E), the electrochemical polarization resistance (R_p), the corrosion current (I_corr) and the release of iron into solution. The surface was further analyzed by scanning electron microscopy (SEM/SEM-EDAX) and atomic force microscopy. Concentrations of 0.1 mM of any of the chelators led to slight, temporary changes in E, I_corr and R_p. Concentrations of 10 mM resulted in characteristic changes of E, which were the same for all chelators and in the precipitation of FePO₄ in the case of citrate and acetylacetonate, or vivianite [Fe₃(PO₄)₂ · 8H₂O] in the case of bipyridine and FerroZine. Concentrations of 1 mM of both iron(III)-chelators led to a temporary drop of E similar to that found with 0.1 mM chelator. With iron(II)-chelators, E dropped to about −500 mV before oscillating for several days. The amplitudes of the oscillations were up to 200 mV with periods of 30 and 20-25 min for bipyridine and FerroZine, respectively.     

Copper phthalocyanine as corrosion inhibitor for ASTM A606-4 steel in 16% hydrochloric acid

A study based on the corrosion inhibition properties of copper phthalocyanine is described. Coverage degrees of copper phthalocyanine (Cu-phcy) on ASTM-A606-4 steel, obtained by weight loss measurements, were fitted to Langmuir, Frumkin, Temkin and Flory–Huggins adsorption isotherms. A better fit to the Langmuir isotherm was obtained. The polarization curves showed that polarization of both the anodic and cathodic reactions were verified for concentrations higher than 10^–4 M, indicating a mixed type action. Only the anodic reactions were polarized for lower concentrations. At high frequencies the Nyquist diagrams showed one capacitive loop attributable to double layer charging and a small one at intermediary frequencies attributable to the faradaic process of hydrogen evolution. The formation of an adsorbed film was characterized by increasing charge transfer resistance values in the low frequency range for increasing inhibitor concentrations. According to the techniques used in this study, copper phthalocyanines showed a high corrosion inhibiting efficiency for all concentrations.     

微合金化高强度钢轧制采用的工艺技术

本文综述微合金化高强度钢轧制采用的工艺技术，其中包括热装热送、板坯加热、控轧控冷、快速冷却、采用的新设备等工艺技术。重点是生产低碳、高韧性、高强度、易焊接的造船用钢采用形变热处理技术，以提高产量和质量，节省昂贵的Ｎｉ、Ｃｒ、Ｍｏ等合金，降低生产成本。