OMAPL138和FPGA的合并单元设计方案

提出了一种基于ARM9+DSP双核处理器OMAPL-138和FPGA的合并单元设计方案。给出了该方案的原理框图,以及具体的程序流程图,并在CCS开发环境下完成了软件编程,实现了合并单元按照IEC61850标准规定的格式进行数字量以太网传输。实验结果证明了该设计方案的可行性与正确性,为合并单元的设计提供了一种新的思路。     

Roll‐to‐roll UV embossing process applied for light bar‐based sub‐wavelength gratings for backlight

This study proposes a roll‐to‐roll process‐based sub‐wavelength grating, which is attached on a light bar to turn the side‐lit red/green/blue (620, 520, and 450 nm) incident rays into a uniformly and normally output white light with high illuminance from the light bar's surface. On the basis of the rigorous coupling wave analysis, the relationship between the first‐order transmission/reflection efficiency and the pitch of the gratings with different shapes was analyzed. The optimal design can effectively reduce the coupling length and enhance the white color balance for display applications.     

Nodal ant colony optimization for solving profit based unit commitment problem for GENCOs

This paper proposes a nodal ant colony optimization (NACO) technique to solve profit based unit commitment problem (PBUCP). Generation companies (GENCOs) in a competitive restructured power market, schedule their generators with an objective to maximize their own profit without any regard for system social benefit. Power and reserve prices become important factors in decision process. Ant colony optimization that mimics the behavior of ants foraging activities is suitably implemented to search the UCP search space. Here a search space consisting of optimal combination of binary nodes for unit ON/OFF status is represented for the movement of the ants to maintain good exploration and exploitation search capabilities. The proposed model help GENCOs to make decisions on the quantity of power and reserve that must be put up for sale in the markets and also to schedule generators in order to receive the maximum profit. The effectiveness of the proposed technique for PBUCP is validated on 10 and 36 generating unit systems available in the literature. NACO yields an increase of profit, greater than 1.5%, in comparison with the basic ACO, Muller method and hybrid LR-GA.     

基于MCS-51系列单片机时间控制器软件的设计与实现

本文设计的基于MCS-51系列单片机时间控制器主要应用AT89C51作为控制核心,采用实时时钟芯片DSl302、EipROM24C02及动态数码显示相结合。具有硬件电路简单、软件功能完善、控制系统可靠、性价比较高等特点,具有一定的使用和参考价值。     

基于信息元的教学资源组织系统设计与实现 *

以文本类型教学资源为研究对象,在领域知识可拓信息网模型和CELTS-3的基础上,阐述了基于信息元的教学资源组织系统设计与实现过程,包括信息特征元数据描述框架、特征词获取、信息元距离度量、信息元匹配规则以及匹配算法等.该系统通过有限的信息元描述无限的资源,实现了教学资源的高效组织,支持学习过程中资源自动重组.     

Fast computation of computer-generated hologram using Xeon Phi coprocessor

We report fast computation of computer-generated holograms (CGHs) using Xeon Phi coprocessors, which have massively x86-based processors on one chip, recently released by Intel. CGHs can generate arbitrary light wavefronts, and therefore, are promising technology for many applications: for example, three-dimensional displays, diffractive optical elements, and the generation of arbitrary beams. CGHs incur enormous computational cost. In this paper, we describe the implementations of several CGH generating algorithms on the Xeon Phi, and the comparisons in terms of the performance and the ease of programming between the Xeon Phi, a CPU and graphics processing unit (GPU).     

Carbon Aerogels as Electrode Material in Supercapacitors

Due to their large specific surface area and their high electrical conductivity carbon aerogels are promising materials for electrodes in electrochemical double-layer capacitors (supercapacitor). The carbon aerogels were made via pyrolysis of resorcinol formaldehyde aerogels. The latter were prepared by supercritical and subcritical drying as well. The important findings of our investigation were, that the highest capacities of 46 F/cm³ were measured for samples with a density of about 800 kg/m³ pyrolyzed at 800°C. Also it was shown that RF-gels with molar resorcinol/catalyst ratios 1000 or higher can be dried subcritically without cracking or significant shrinkage. Carbon aerogels derived from these RF-aerogels have a small mesopore surface area, however an especially large micropore area. They provide electrical capacities which are most suitable for their use in supercapacitors.     

我国化肥催化剂工业现状

全国48家化肥催化剂制造厂总能力为57Kt/a,产量近30kt/a,设备利用率不到50%。平均万吨氨耗催化剂10.36t,高于国外5.60t水平。现生产31个品种203个型号的催化剂中有103种经部级鉴定,但经常使用的约50种。目前化肥催化剂工业水平与国外相比还存在四方面差距。     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

系统控制单元数据存储更新算法探讨

系统控制单元的有限存储空间被系统运行数据写满时,新产生的数据就需替换旧数据完成更新。通过采用逐条替换法、分块替换法、间歇删除法和抢断删除法,比较替换过程中最少存储数据的数量和实时性的滞后时间,找出一种最优的数据更新方法。试验结果表明,抢断删除替换算法更能快速有效实时完成数据的更新。