Coincidence Doppler broadening spectroscopy in polyvinyl chloride after doping with Al2O3

Coincidence Doppler broadening of annihilation radiation (CDBAR) and Vickers hardness techniques were performed to study pure Al₂O₃, pure polyvinyl chloride (PVC), and doped PVC with different concentrations of Al₂O₃ (10–50%). The CDBAR ratio curves with respect to pure PVC were presented and reflect the momentum distribution of all the samples. The peak around 14.5 ×10^?3 m_oC in the CDBAR ratio curves suggests a large contribution of positron annihilation with the Al₂O₃. There is a linear correlation between the height of this peak and the Al₂O₃ concentration. The S‐ and W‐parameters were extracted from the CDBAR spectra and increase with increasing the Al₂O₃ concentration showing discontinuity at 30% of Al₂O₃ concentration on PVC. The present data confirmed that there is no positronium formation in pure Al₂O₃ as a result of smaller S‐parameter. The Vickers hardness increases with increasing the Al₂O₃ concentration in PVC showing a linear dependence with two different slopes depend on the Al₂O₃ concentration range. A correlation between the Vickers hardness (macroscopic data) and the W‐parameter (microscopic data) was observed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Mechanistic investigation into the electrolytic formation of iron from iron(III) oxide in molten sodium hydroxide

Iron(III) oxide tablets were electrolytically reduced to iron in molten sodium hydroxide at 530 °C and recovered to produce iron with 2 wt.% oxygen suitable for re-melting. The cell was operated at 1.7 V and an inert nickel anode was used. The thermodynamics and mechanism of the process was also investigated. By controlling the activity of sodium oxide in the melt, the cell could be operated below the decomposition voltage of the electrolyte with the net sequence of events being the ionization of oxygen, its subsequent transport to the anode and discharge leaving behind iron at the cathode. A reduction time of 1 h was achieved for a 1 g oxide tablet (close to the theoretical reduction time predicted by Faraday’s laws) at a current density of 520 mA cm⁻² with iron phase yields of ∼90 wt.%. The energy consumption was 2.8 kWh kg⁻¹.     

一种二维梯度电极模型的表面热应力缓和设计

针对一种侧面和一端的成分呈梯度变化的圆柱体电极模型进行了热应力缓和优化设计。模型材料成分是金属Cu和NiFe2O4尖晶石陶瓷。采用混合律定律确定材料组分．性质关系，利用ansys有限元分析软件计算了从300K(零应力状态)升温到1300K时模型表面的热应力，分析了层数n、成分指数p以及锥角θ对模型表面热应力分布的影响。结果表明：层数n主要影响应力曲线的光滑程度，层数增加，曲线变得平滑；成分指数p是热应力缓和设计的关键，指数越小，应力越小；锥角θ的增加也可缓和热应力，但作用不如成分指数。     

管道内壁阴极保护技术

阴极保护技术已广泛应用于管道的外防腐,而在管道的内防腐中还存在只适用于大口径管道、保护距离短、阳极与管道内壁绝缘难、安装复杂等问题。为此,江汉油田设计院开展了管道内壁阴极保护技术研究工作。试验证明,管道内壁采用强制电流和牺牲阳极阴极保护完全可行,用在柔性阳极或带状锌合金、铝合金牺牲阳极上外套打孔塑料管或塑料网的安装方式成功地解决了管道内壁阴极保护存在的上述问题,具有适用范围广、施工工艺简单、经济方便等优点。文章着重介绍了塑料套管或塑料网阳极安装方式及其模拟试验、现场试验的条件和结果。     

Al2O3对唐钢高炉炉渣性能的影响

针对唐钢近2年提高进口矿配比后，Al2O3含量升高对炉渣流动性带来的不利影响，对唐钢高炉的炉渣性能进行了试验研究。并结合国内同行业的生产实践经验，从理论上分析了炉渣中Al2O3及MgO的适宜含量范围，着重论述了唐钢所处冀东矿区条件下降低Al2O3的主要途径及适应高Al2O3炉渣的具体措施。     

Ti_3Al金属间化合物的熔盐热腐蚀

采用电化学方法并结合扫描电镜、X 射线衍射、电子探针和能谱等物相分析技术研究了 Ti_3Al 金属间化合物在800℃熔融 NaCl-(Na,K)_2SO_4体系中的腐蚀行为。结果表明,Ti_3Al 合金耐熔盐腐蚀性能远低于 Ni 基 IN738合金。腐蚀时在合金表面形成外层为 TiO_2;内层为富 Nb 的Nb_2O_5,Al_2O_3,TiO_2的混合层和中间层为富 Al 的 TiO_2,Al_2O_3混合层的多层腐蚀层结构。Ti 快速向外扩散和氧向内扩散使合金表面腐蚀产物层迅速增厚。腐蚀产物内层的富 Nb 氧化物破坏了膜层与合金基体的粘附性。     

从铅阳极泥中回收铋的火法工艺实践

主要论述了从铅阳极泥中回收铋的全火法工艺流程改造与实践，并取得了预期的效果。     

高温合金材料在铝电解工业中的应用探讨

对高温合金在铝电解工业用作惰性金属阳极材料的选择进行阐述，并就实际应用过程中的抗氧化耐腐蚀性进行探讨；阐述适用于铝电解工业的惰性阳极合金所应具备的必要条件和必须解决的问题，并介绍目前有关的研究动态和研究方向。     

Microstructure evolution of nanostructured Ni3Al during annealing

A nanocrystalline layer was produced on the surface of Ni3Al intermetallic by means of surface mechanical attrition treatment. The surface nanocrystallites were annealed at 250-750 ℃ for 30 min. Microstructure evolution of nanocrystallites during annealing was studied by X-ray diffraction （XRD） and transmission electronic microscope （TEM）. The experimental results show that long-rang order recovers rapidly when annealing temperature is below 250℃ and changes slowly at 350-550 ℃, and then it increases rapidly at 750℃. The grain size of nanocrystallites of Ni3Al keeps stable and crystal defects recover when they are annealed below 550℃. The grains grow normally in low temperature annealing and abnormal growth occurs at 750℃.     

含RE铝阳极中析出相的电化学行为研究

用电子探针和能谱分析技术，观察了Al-5Zn-0．05In-0．1Sn-1Mg-0．3RE阳极中主要析出相的成分，并熔炼了析出相合金．电位测量和腐蚀后铝阳极表面的电子探针面扫描分析表明：富Sn相为阳极相，富Fe相、富RE相为阴极相；Fe相是铝阳极自腐蚀微电池中的主要阴极相，温度对析出相的电化学行为有影响．