Structural and chemical stability of multiwall carbon nanotubes in sintered ceramic nanocomposite

Abstract

Abstract

The structural and chemical stability of multiwall carbon nanotubes (MWNTs) in ceramic nanocomposites prepared by spark plasma sintering was studied. High resolution electron microscopy, X-ray diffraction and Raman spectroscopy were used to evaluate any degradation of the MWNTs. They were found to be well preserved in alumina after sintering up to 1900°C/100?MPa/3?min. In boron carbide, structural degradation of MWNTs started from ～1600°C when sintered for 20?min. Multiwall carbon nanotubes maintained their high aspect ratio and fibrous nature even after being sintered in boron carbide at 2000°C for 20?min. However, no Raman vibrations of MWNTs were observed for nanocomposites processed at temperatures <2000°C, which indicates that they were severely degraded. Structural preservation of MWNTs in ceramic nanocomposites depends on the ceramic matrix, sintering temperature and dwell time. Multiwall carbon nanotubes were not preserved for matrices that require high sintering temperatures (>1600°C) and longer processing times (>13?min).     

Gel-casting of transparent magnesium aluminate spinel ceramics fabricated by spark plasma sintering (SPS)

In this paper, a transparent magnesium aluminate spinel ceramic was fabricated through the newest colloidal gel casting method, using a synthetic powder with the average particle size of 90 nm and Isobutylene-Maleic Anhydride (ISOBAM) additive. ISOBAM served as both a dispersant and a gelation agent to achieve a dense body. Also, the suspension rheological behavior was optimized by the solid loading of 85 wt%, the additive content of 0.7 wt%, and the gelation time of 350 s. This led to a green body with a density equal to 65% of theoretical density and the green strength of 14.48 MPa. The results revealed that the reduction of porosity and the uniform distribution of pores in the green body (smaller than half of the initial powder particle size, 35 nm), as accompanied by spark plasma sintering (SPS), resulted in the final body density of 99.97%, as well as the high in-line transmittance of 86.7% at the wavelength of 1100 nm.     

Thermal cycling and hot corrosion behavior of a novel LaPO4/YSZ double-ceramic-layer thermal barrier coating

LaPO₄ powders were produced by a chemical co-precipitation and calcination method. The ceramic exhibited a monazite structure, kept phase stability at 1400?°C for 100?h, and had low thermal conductivity (~ 1.41?W/m?K, 1000?°C). LaPO₄/Y₂O₃ partially stabilized ZrO₂ (LaPO₄/YSZ) double-ceramic-layer (DCL) thermal barrier coatings (TBCs) were fabricated by air plasma spray. The LaPO₄ coating contained many nanozones. Thermal cycling tests indicated that the spallation of LaPO₄/YSZ DCL TBCs initially occurred in the LaPO₄ coating. The failure mode was similar to those of many newly developed TBCs, probably due to the low toughness of the ceramics. LaPO₄/YSZ DCL TBCs were highly resistant to V₂O₅ corrosion. Exposed to V₂O₅ at 700–900?°C for 4?h, La(P,V)O₄ formed as the corrosion product, which had little detrimental effect on the coating microstructure. At 1000?°C for 4?h, a minor amount of LaVO₄ was generated.     

Whole grains and resistant starch rich,reduced‐calorie biscuit diet as a hypoglycaemic,hypolipidaemic and insulin stimulator in streptozotocin‐induced diabetic rats

A fibre‐enriched, reduced‐calorie biscuit [formulated biscuit (FB)] was evaluated for its antidiabetic and antilipidaemic potential in streptozotocin‐induced diabetes in Wistar rats against control biscuit (CB) having high calorie and low fibre content. Animals were allocated into five groups: a control group fed with synthetic diet, two diabetes‐induced groups (CBD and FBD) and two nondiabetic groups (CBND and FBND). CBD and CBND were fed with synthetic diet + CB while FBD and FBND were fed with synthetic diet + FB. After 6 weeks of feeding, the change in weight of nondiabetic group fed with FB (+16.20%) was nonsignificantly lower compared to control (+33.01%) and CB‐fed (+34.55%) group. Nonsignificant loss in body weight was observed among diabetic group fed with FB (?11.76%) or CB (?36.88%). Feeding of FB led to a significant decrease in fasting and postprandial blood glucose levels, total cholesterol, triglycerides, LDL‐C, VLDL‐C and atherosclerotic index and increase the HDL‐C. Histological examination showed that feeding of FB was able to partially recover the destroyed β‐cell in STZ‐induced diabetic rats.     

Optical diffraction gratings embedded in BK-7 glass by low-density plasma formation using femtosecond laser

The optical embedded diffraction gratings with the internal refractive index modification in BK-7 glass plates were demonstrated using low-density plasma formation excited by a high-intensity femtosecond (130 fs) Ti: sapphire laser (λp=790 nm). The refractive index modifications with diameters ranging from 400 nm to 4 μm were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than 1×1013 W/cm2. The graded refractive index profile was fabricated to be a symmetric around the center of the point at which low-density plasma occurred. The maximum refractive index change (Δn) was estimated to be 1.5×10-2. Several optical embedded gratings in BK-7 glass plate were demonstrated with refractive index modification induced by the scanning of low-density plasma formation.     

Crystallization of amorphous silicon thin film by using a thermal plasma jet

Amorphous silicon (a-Si) films deposited on glass substrates were crystallized using a thermal plasma jet and the treated films are analyzed to find the relationship between plasma characteristics and crystallization process conditions. The crystallization process conditions were found to have different optimal operating regimes depending on the nozzle geometry. Numerical analysis of the thermal plasma jets showed that the different operating regimes for crystallization were caused by modifications of the plasma characteristics by the nozzle geometry. It is revealed that a stepped-divergent nozzle is more efficient for the thermal plasma annealing process than the conventional cylindrical one due to the broadened high-temperature region and the lowered axial velocity in the plasma jet.     

Characteristics of plasma produced by MHD technology and its application to propulsion systems

This paper analyzes plasma characteristics for the newly proposed concept of a closed-loop MHD power generation combined cycle system, which is used as a pulse-driven MHD accelerator to accelerate plasma to high velocity, with a nuclear plant. In this paper, since the final goal is for the space propulsion system applications, the performance of a MHD acceleration system is also analyzed by the Q1D analysis program. Results reveal that the radial velocity with the MHD effect is accelerated rapidly at the channel exit, with a calculated maximum velocity of about 4700 m/s. Consequently, specific impulse approximately 480 s and thrust of about 6550 N are estimated. The static gas temperature is evaluated at less than 600 K, while the value of about 1800 K is calculated for the stagnation gas temperature in the MHD channel.     

Diesel emission control system using combined process of nonthermal plasma and exhaust gas components' recirculation

A NO_x aftertreatment system, using nonthermal plasma (NTP) reduction and exhaust gas components' recirculation, is investigated. A pilot-scale system is applied to a stationary diesel engine. In this system, NO_x is first removed by adsorption, and subsequently, the adsorbent is regenerated by thermal desorption. NO_x desorbed is reduced by using nitrogen NTP. Moreover, NO_x, CO₂, and water vapor recirculated into the engine intake reduce NO_x. In this study, approximately 57% of the NO_x of the exhaust (NO_x: 240-325 ppm, flow rate = 300 NL/min) can be continuously treated for 58 h. A system energy efficiency of 120 g (NO₂)/kWh is obtained.     

Determining the keyhole geometry based on double-elliptic distribution of plasma arc pressure

The plasma arc pressure plays an important role in determining the keyhole formation and size. So it is of great significance to choose adaptive distribution mode of the plasma arc pressure for determining keyhole shape and size. In this study, through employing a double-elliptic distribution mode of plasma arc pressure, three-dimensional keyhole was numerically simulated. The unsymmetric feature of the keyhole inside the weld pool was described. The development of keyhole was demonstrated under different levels of welding current. The critical current required to form an open keyhole was obtained for the study cases.