含硼微合金钢的静态及动态软化行为

运用gleeble-1500热模拟试验机November对含硼微合金钢进行了单、双道次压缩模拟,并通过非线性回归分析得到了静态与动态软化百分比(X)与变形温度(T)、变形程度(ε)、变形速率(ε·)、原始晶粒尺寸(d0)、道次间隔时间(t)之间的关系。     

高校MIS系统架构与安全实现

探讨了采用B/S网络结构模式的高校校园网MIS架构及其安全实现.     

A control model for an insurance company

The activity of an insurance company with a reinsurance condition system is modeled on an infinite time interval. Payment times and sums insured are random. The amount of money replenished is selected as a control parameter. The task is to minimize the average insurance payment per unit time, thus optimizing investments.Translated from Kibernetika i Sistemnyi Analiz, No. 6, pp. 172–176, November– December 2004.This revised version was published online in April 2005 with a corrected cover date.     

Growth and optical properties of Er,Yb:YAl3(BO3)4 crystal

Single crystal of erbium, ytterbium-codoped yttrium aluminum tetraborate Er,Yb:YAl₃(BO₃)₄(Er,Yb:YAB) has been grown by the flux method. The absorption spectrum in the visible and NIR regions of Er,Yb:YAl₃(BO₃)₄ crystal are measured at room temperature and fluorescence spectrum of Er,Yb:YAl₃(BO₃)₄ crystal are also measured at room temperature, excited by 976 nm laser. Not only the strong NIR emission peaks located at 1548 nm was observed, but also the visible up-conversion luminescence has been found. The specific heat of the Er/Yb:YAB crystal at room temperature is 0.81 J/g °C.     

Comparison of corrosion behavior of zirconium bombarded with self-ion and molybdenum ion

In order to study the effects of zirconium and molybdenum ion bombardment on the aqueous corrosion behavior of zirconium, one group of specimens was implanted with zirconium ions with ions surface densities ranging from 1 × 10¹⁵ to 2 × 10¹⁷ ions/cm² at about 170 °C, using a metal vapor vacuum arc (MEVVA) source operated at an extraction voltage of 50 kV. The other group of specimens was bombarded with molybdenum ion with ions surface densities ranging from 1 × 10¹⁶ to 5 × 10¹⁷ ions/cm² at about 160 °C, using a MEVVA source operated at an extraction voltage of 40 kV. The valence states and depth distribution of elements in the surface of the samples were analyzed by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES), respectively. Polarization curves measurement was employed to evaluate the aqueous corrosion resistance of the zirconium samples in a 1N H₂SO₄ solution. It was found that the aqueous corrosion resistance of zirconium implanted with 5 × 10¹⁶ Zr ions/cm² is the best in first group samples. For molybdenum ion implantation, the aqueous corrosion resistance of samples declined with raising ions surface densities. The natural corrosion potentials of zirconium samples bombarded with self-ions are more negative than that of the as-received zirconium. While, as for molybdenum ion implantation, the results are opposite. Finally, the mechanisms of the corrosion behavior of the zirconium samples implanted with zirconium and molybdenum ions are discussed.     

Synthesis and characterization of thorium phosphate phases by spray pyrolysis: chemistry of thorium phosphates

This paper describes the synthesis of some thorium phosphate compounds with different Th/P ratio (1/2, 2/3 and 3/4) by a spray pyrolysis technique. The so-prepared rough compounds were annealed at different temperatures for 2 h and then analyzed by mainly X-ray diffraction on powder and infrared spectroscopy. Every rough compound is composed by very badly crystallized ThO₂ phase polluted by carbon residue. An annealing treatment at 800 °C leads to the thorium diphosphate phase, α-ThP₂O₇ in every case. At 900 °C, such a phase is decomposed into a thorium phosphate diphosphate phase (Th₄(PO₄)₄P₂O₇, called TPD). However, a thorium excess in the initial mixture (Th/P = 3/4) leads also to observe the ThO₂ phase. The TPD phase is stable up to 1200 °C and does not react with the ThO₂ compound. Beyond 1200 °C, the TPD phase is slowly decomposed into a thorium phosphate compound which should be a thorium oxide phosphate; this compound does not contain any diphosphate species.     

A numerical study of the heterogeneous porosity effect on self-propagating high-temperature synthesis (SHS)

Self-propagating high-temperature synthesis (SHS), or the so-called micropyretic/combustion synthesis, is a technique whereby a material is synthesized by the propagation of a combustion front across a powder. Heterogeneous distributions of porosities are common during self-propagating high-temperature synthesis when powders are pressed and the conventional modeling treatments thus far have only considered uniform systems. Heterogeneities in the porosity are thought to result in local variations of such thermophysical/chemical parameters for the reactants as density and thermal conductivity further changing the combustion temperature, the propagation velocity, and the propagation pattern of a combustion front. This study investigates the impact of porosity variations during self-propagating high-temperature synthesis with Ti + 2B. In addition, the simulations for the propagation of combustion fronts across a non-uniform compact where the porosity is monotonically decreased or increased along the specimens due to die wall friction are also carried out.     

SWP-LE智能流量积算控制仪的应用

本文主要介绍了SWP-LE系列表计的实用功能、工作原理及实际操作中的注意事项,论述了该表计在生产中的应用价值.     

基于3S不可移动文物管理系统的实现

提出对文物保护单位传统管理方式进行革新,将数据库技术、计算机网络技术、3S技术(地理信息系 统、遥感和全球定位系统)融为一体,基于GIS平台建立统一的内蒙古自治区不可移动文物信息管理系统,实现了自 治区文物数据完全共享的信息化管理和网络展示模式,为政府机关、文物机构的管理保护工作提供科学依据和决策 支持。     

无刷新Web客户端组件的研究与实现

为了将显示部分回归客户端,减少传统的Web应用程序开发中与服务器端的通讯,充分利用网络两端的资源,结合C/S和B/S两种模式的优势,借鉴组件开发思想,提出利用客户端JavaScript与DOM技术生成无刷新可复用客户端组件.为开发人员提供了功能全面、简单易用的客户端组件,缩短了开发周期.