A Survey of Inverse Surface Design From Light Transport Behavior Specification

Inverse surface design problems from light transport behavior specification usually represent extremely complex and costly processes, but their importance is well known. In particular, they are very interesting for lighting and luminaire design, in which it is usually difficult to test design decisions on a physical model in order to avoid costly mistakes. In this survey, we present the main ideas behind these kinds of problems, characterize them, and summarize existing work in the area, revealing problems that remain open and possible areas of further research.     

光纤光栅传感器在公路隧道衬砌结构安全监测中的应用

从工程实用角度归纳了光纤光栅传感器相对于其他传统监测仪器的主要优势,阐述了其在隧道结构安全监测中的适宜性.在此基础上结合某公路隧道衬砌结构的薄弱部位和具体条件,设计了现场自动化监测和无线数据通信系统,采用光纤光栅传感器对隧道支护结构的变形和受力状态进行了实时监测实验,结果真实有效地反映了结构物的运行性态,表明光纤光栅传感器在公路隧道结构安全监测中具有良好的实用效果.     

一种改进小波阈值函数的光纤光栅传感信号去噪方法

光纤布拉格光栅( FBG)传感信号中存在的噪声严重影响了其中心波长的检测精度,因此必须进行去噪处理。本文针对传统的小波软、硬阈值函数去噪的不足,提出了一种改进的对数阈值函数,并确定了最优的小波基和分解尺度。仿真表明,本文提出的改进阈值函数去噪后信噪比( SNR)较大,均方根误差( RMSE)较小,其中信噪比比传统的软、硬阈值方法提高了1.5 dB~4 dB。最后通过实验验证了本文方法的去噪效果。     

非对称级联型全光纤Fabry-Perot腔谱特性研究

为了进一步优化光纤光栅法布里-珀罗窄带滤波器的滤波性能,提出了基于光纤布拉格光栅的全光纤型非对称级联法布里-珀罗腔（FBG-FP）结构。通过传输矩阵方法,建立了数学仿真分析模型,推导出FBG-FP结构产生单峰谐振需满足的条件。对其传输特性进行了详尽的理论分析和模拟仿真,数值分析结果表明：通过对光纤布拉格光栅折射率调制深度以及谐振腔长等结构参量的优化组合,可以改善非对称双腔结构谐振光谱的通带平坦性和过渡带滚降特性;双腔FP器件可以得到更高的波长选择度,因此可用作信道化滤波与可调单频光纤激光器。     

采用曲面设计的LED前照灯建模及配光分析

LED作为汽车前照灯的光源在节能和效率上具有优势,本文研究了使用半导体LED光源前照灯的反射镜曲面的设计方法,并进行了配光验证分析。根据前照灯近光配光标准、LED光源特点和反射镜曲面设计,作者建立了新颖的LED前照灯的设计模型,包括LED光源模拟、反射器曲面设计、透镜设计单元和配光分析。作者提出不规则三维曲面作为反射镜的方法,并实现了LED前照灯的照明计算仿真。文章最后分析了实验结果,并指出LED前照灯的前景和未来大功率LED汽车前照灯发展的关键技术。     

Simultaneous measurement of temperature and strain with long period grating pairs using low resolution detection

An investigation showing the performance of compact long period grating (LPG) pairs under demanding experimental conditions, making comparisons with the use of single LPGs for the simultaneous measurement of strain and temperature is presented. In this work, a LPG pair (LPGP) sensor comprising two weak (2.5 dB each) LPGs, 13 mm apart, was compared against the performance of two single LPG sensors (LPG1 & LPG2) with coupling strengths of 2.5 dB and 12.5 dB, respectively. All the LPG sensors used were subjected to extreme conditions arising from the fabrication, by choosing a high amplitude mask period with short physical length LPGs, and the high temperature annealing processes. In addition, a low resolution detection instrument was used to capture the spectra under study. Results have shown that the LPGP is 40 times better than the first single LPG used (LPG1) and three times better than the second LPG (LPG2). Using the error analysis methodology of Brady et al., the temperature and strain errors due to the uncertainty of the wavelength measurement for each of the LPG1, LPG2, and LPGP were compared with the typical performance of various fibre Bragg grating (FBG)-based sensor schemes under similar testing conditions. It was found that LPGPs offer the best performance especially when using low resolution detection instrumentation.     

正弦信号测试仪的设计

正弦波信号是工程实践中应用最多的电信号之一,对幅值、频率、相位三要素的测量是测量正弦波信号的主要内容,本设计从该三要素出发提出了设计正弦信号测试仪的具体方案;正弦信号的幅值测量模块以高精度峰值检波电路为核心,结合单片机与AD采样技术实现幅值测量功能;频率测量模块采用专用芯片ICM7216D实现频率测量功能;相位测量模块则使用相位检测电路与单片机相结合实现相位测量功能;通过实践证明,该正弦信号测试仪设计切实可行,且具有硬件结构简单、软件设计灵活、适用面广等优点,是一种有较高应用价值的正弦信号测量仪器.     

基于电磁力的FBG电流传感器研究

利用通电螺线管与永磁铁之间的作用力,提出了一种测量电流的方法.光纤Bragg光栅(FBG)在永磁铁的牵引下发生轴向应变,引起Bragg中心波长的漂移,通过解调中心波长漂移量对电流进行测量.实验中采取多匝数螺线管和小电流来模拟大电流,对0-3A的直流电流进行了测量.实验结果表明:中心波长漂移量与电流有很好的线性关系,线性...     

Theoretical analysis of polarization properties for tilted fiber Bragg gratings

The polarization properties for tilted fiber Bragg gratings (TFBGs) are investigated theoretically based on coupled-mode theory and Mueller matrix method. The expression of wavelength-related polarizationdependent loss (PDL) for TFBGs with different tilt angles is derived and calculated. Simulation results are compared, and the results indicate that the polarization capability of TFBGs with 45° angle is stronger than other TFBGs with smaller angles. The degree of polarization for unpolarized light passing T...     

变压器漏磁热损的光纤Bragg光栅检测与温升特性分析

变压器的漏磁场强度随着变压器容量的增大而增大,漏磁场强度越大在变压器各结构中引起的漏磁损耗越大,导致变压器运行效率低下,进而影响变压器的正常运行。对35 kV变压器进行试验,将漏磁产生最大处的温度与油箱产生顶端处的温度进行了对比,试验得出当开风机时该处与油箱顶端处的最高温度差为8.7℃、当负荷降至1倍功率时温差为2.9℃,它们的实时温度曲线图与变压器的运行一致,产生了局部温升的现象。通过光纤Bragg光栅（ FBG）检测温度的变化反映变压器漏磁的情况,从而实现了对变压器漏磁的实时在线监测。