Calculation methods for comparing the performance of pure and mixed working fluids in heat pump applications

Three methods for comparing cycle performance of working fluids, pure as well as non-azeotropic mixtures, are investigated for two applications and for two mixture pairs, HCFC22-CFC114 and HCFC22-HCFC142b, and their pure components. The methods differ in the way of calculating the heat exchange processes. They assume, respectively, equal minimum approach temperatures, equal mean temperature differences and equal heat transfer areas. Changes of coefficient of performance (COP) with composition are explained for all methods. It is shown that transport properties must be taken into account when making rigorous comparisons between working fluids. To predict the relations between fluids with high accuracy, one must use the method with equal heat transfer areas. By the method with equal mean temperature differences, the COP can be estimated with the same accuracy for mixtures as for pure fluids, and can be used for rough estimations of the COP level with different fluids. The method of equal minimum approach temperatures should be avoided for non-azeotropic mixtures.     

感应电动机转速对定子电流暂态过程的影响

本文运用根轨迹法，分析了感应电动机转速对定子电流暂态过程的影响。并通过对稳态时定子电流在电压阶跃干扰下的暂太响应分析，验证了结论有效性。     

Activation of action rules in action observation.

Visually perceiving an action may activate corresponding motor programs. This automatic motor activation can occur both for higher level (i.e., the goal of an action) and for lower level (i.e., the specific effector with which it is executed) aspects of an action. The authors used a tool-use action paradigm to experimentally dissociate priming effects for observing the target, the movement, or the target-to-movement mapping of a tool-use action. In 3 experiments, participants took turns in acting, observing the tool-use action of another person in trial n-1, and executing an action in trial n. Trial transitions from n-1 to n were manipulated in 4 conditions with (a) mapping repeated and movement and target changed, (b) target repeated and movement and mapping changed, (c) movement repeated and target and mapping changed, or (d) all components repeated. Results indicate priming effects for repeating the target-to-movement mapping (i.e., the action rule) of a tool-use action and suggest that a rather abstract action schema is activated during action observation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

丰城电厂1～4号循环水泵电机线圈温度异常分析及处理

分析了循环水泵电机线圈温度高的原因，提出处理温度高的措施并实施。     

第十九讲 电机控制集成电路的选用二相步进电机驱动电路SAA1042的选用

MOTOROLA公司生产的SAA1042芯片用来控制并驱动二相步进电机，文中对其主要特点，引脚功能，技术指标，典型应用等作了介绍。     

汽车组合仪表板控制系统设计

介绍了以PIC16F873单片机为控制核心的汽车组合仪表板控制系统的设计,简述了汽车组合仪表板的基本构成,介绍了汽车组合仪表板控制系统的组成和各部分功能,给出了数据采集处理电路、电源电路等部分硬件电路设计方案,并阐述了一些软件设计算法,如分段插补法和用于平滑指针的软件设计算法等。     

电动钻机的工作理论基础(一)--系列专题之七

近年来，电驱动已成为石油钻机的主要驱动形式，是钻机自动化、智能化的坚实平台。文章就电动钻机的部分工作理论作初步剖析，包括钻机工作机组对电驱动的要求，可控硅直流电驱动和交流变频电驱动的工作原理，直流电动机和交流变频电动机等的特性分析，电动机的四象限运行和能耗制动原理等。     

基于电压陡降的VRLA容量预测新思路

重点介绍了蓄电池电压陡降与容量之间的关系及各操作因素对电压陡降的影响。由此引出一种新的蓄电池容量预测思路,并就如何实现它进行了初步探讨,最后对该思路进行了简要的展望。     

Service life planning and performance requirements

Service life planning comprises a model for the determination of a reasonable expected service life for buildings and components, and it establishes a routine for the assessment of design alternatives. A design option is considered reasonable when it meets or exceeds performance requirements over time that have been drawn up specifically for the specific project. Due to this assessment reference, there is a very evident link to the concept of performance-based building. Any stakeholder involved in the value chain or in the design process of the building, as well as regulators and building users, can express performance requirements. Identified requirements, both in relevance and in quality, will vary with the stakeholder and his/her perspective of interest. As building sector manufacturers develop most products with reference to standards rather than with reference to specific requirements, there is no direct link from user requirements to the product design. Instead, the building designer has the responsibility to ensure performance requirements are met by the performance of products integrated into the design. As these design decisions also have to be made at the material and component level, a performance-based building would benefit from an established rationale that enables the communication of performance requirements across the relevant system levels in the relevant design processes. A path for the connection of the established concepts of service life planning and performance-based building is presented. The aim is to identify key elements that need to be developed for the successful linkage of performance-based building with service life planning.     

数控加工螺旋凸轮的铣床改造

在普通铣床上实施数控改造后，可应用软件程序使步进电机任意变速，并可在加工过程中任意改变这行方向．从而突破了凸轮加工的传统方式，达到了简化程序、提高效率的同的．