Strengths and ductility of Mo–TiC alloys after secondary recrystallization

A series of Mo–TiC alloys were heated in vacuum at 2473 K for 36 ks. First grain growth behavior was observed using a scanning electron microscope. Then effects of TiC addition on the strengths and ductility at low temperature were discussed from the viewpoints of chemical composition and grain structure.

Materials with TiC additions of not larger than 0.1% demonstrated a single-crystalline grain structure. Both yield and maximum strengths increased by TiC addition and consequently ductility was improved.     

富Ag的Ag—Cu合金再结晶

用度测量、示差扫描量热（ＤＳＣ）、金相显微镜、透射电镜等技术研究了富Ａｇ的Ａｇ－Ｃｕ合金的再结晶。对合金再结晶温室随Ｃｕ含量的变化规律以及在相同变形量下，Ｃｕ含量对合金再结晶过程中冷加工储存能的释放的影响进行探索，并讨论了结果。     

介绍一种生产冲挤用铝合金坯料的新工艺

哈兹列特铝板带连铸连轧工艺已被成功地用于铝和铝合金冲击挤压用坯料的生产。在对哈氏四个有关用户扫描的基础上，列举了其产品及其用途，并介绍了相关工艺及其优点。     

Ti-Mo合金的氢化物热解析动力学研究

本文对不同钼含量的钛钼合金Ti(1-x)Mox(x=3,11,20,33,50,at%)氢化物的热解析动力学进行了研究, 在高真空金属系统中测试了合金氢化物热解析量随时间的变化关系,应用反应速率分析方法计算了解析速率常数和表观活化能.研究结果发现,氢化物的热解析过程可用一级反应速率方程来描述,而氢原子在合金体相中的扩散是热解析过程的控速步骤.热解析表观活化能随Mo含量的增加而减小,说明氢化物的热稳定性随Mo含量的增加而降低.     

Al-4%Cu过饱和合金在强磁场中时效行为

采用差示扫描量热仪分析并结合显微硬度测试、电子探针分析、透射电镜观察研究了10-T稳恒强磁场对Al-4％Cu（质量分数）合金130℃时效过程中各沉淀相析出行为的影响。结果表明：在低温时效初期强磁场的引入加速了铜的扩散，降低了G.P.（Ⅰ）区的溶解激活能，促进其溶解，各沉淀相的析出与溶解温度均向低温处移动，时效进程加快；另外，强磁场时效后沉淀相尺寸减小；施加强磁场试样的硬度明显高于未施加磁场试样的，时效硬化效果加强。     

The magnetic applications choice among ferrite ceramics,metallic strips,or metal powder cores

Iron-based metallic strip materials such as iron, silicon-iron, and amorphous metal are used for low frequency (50–60 Hz. line) power applications. Low-loss Nickel-based alloys as high permeability strip or insulated powder cores are the choices for stable, low-level higher frequency applications. Iron-based powder cores offer low cost as power supply filter chokes. Ceramic ferrites combine highest frequency operation with low cost and reduced component size as transformers and chokes in telecommunication and high frequency power supply applications.     

Thermophysical Properties of W–Re Alloys Above the Melting Region

In earlier experiments we have studied pure elements with a fast pulse heating technique to obtain thermophysical properties of the liquid state. We report here results for thermophysical properties such as specific heat and dependences among enthalpy, electrical resistivity, and temperature, for four W–Re alloys (3.95, 21.03, 23.84, and 30.82 at % of Re) in a wide temperature range covering solid and liquid states. Thermal conductivity is calculated using the Wiedemann–Franz law for the liquid alloy, as.well as data for thermal diffusivity for the beginning of the liquid phase. Additionally, data for the entire temperature range studied have been analyzed in comparison with those of the constituent elements, tungsten and rhenium, since both metals have been studied previously with the same experimental technique. Such information is of interest in the field of metallurgy since W–Re alloys of low Re content in the region of mutual component solubility in the solid state are widely used as thermocouple materials for the purposes of high-temperature thermometry.     

控制棒钴吸收体的活度分布

应用单组中子微扰理论,对辐照后控制棒钴吸收体内活度分布进行理论分析,得到活度分布计算的解析表达式。对高通量工程试验堆(HFETR)首次出堆的2根控制棒钴吸收体进行数值计算。利用钴靶活度水下测量装置进行这2根钴吸收体活度分布的实验测量。计算与实验测量结果相符。通过理论计算所得到的活度分布可作为辐照后~(60)Co同位素分装依据。本文得到的控制棒相对价值曲线理论计算值与实验测量结果符合良好。     

A universal dependence for thermal conductivity of metals and dilute alloys

A universal curve relating the maximum of thermal conductivity and its respective temperature with the residual electrical resistivity has been proposed for metals and dilute alloys. Based on the equation of that curve, a comparative analysis of selected literature data of thermal conductivity of metals, which have residual electrical resistivity in the range 10^–11<₀<10^–5. cm, have been performed. Using the data for 33 metals, confirmation of the Wiedemann-Franz law for the impurity component/T of thermal conductivity was obtained, which means that _th/_el1, where _th and _el are the parameters of the electron-lattice defect interaction obtained from measurements of thermal and electrical conductivity, respectively. Examples of the failure of the Wiedemann-Franz law are also presented, exhibiting the values of _th/_el in the range 0.16 to 25. Measurements of thermal conductivity in the range 2 to 20 K and determination of the residual electrical resistivity for the samples of Cd doped with Zn and quenched were performed, resulting in values _th/_el1.     

Magnetic and mössbauer studies on ductile Fe-Cr-Co permanent magnet alloys

Iron-chromium-cobalt alloys possess attractive magnetic properties combined with good formability and hence are identified as technologically important magnetic materials. Alloys with compositions Fe-28·9 Cr-15·6 Co and Fe-28·4 Cr-20·1Co (weight percent) have been studied. Heat-treatment parameters during thermomagnetic treatment viz temperature, time and external magnetic field were optimized with reference to magnetic properties. The fully treated anisotropic alloys develop remanence=11·5–12·0 kilo Gauss, coercivity=600–650 Oersted and energy product=4–4·5 million Gauss Oersted. Electron microscopic and Mössbauer spectroscopic techniques were used to identify the original and transformed phases. During the various stages of the development of the alloy, the changes in mechanical hardness were correlated with magnetic hardness.