起重机吊钩拖动绕线电动机他励双高调速系统

本文提出励磁电流可自动控制的他励式双高调速系统设计方案。系统在提升特别是在下放重物时，具有较硬的机械性；在负载１０－１００％的变化范围内，可实现最大偏差Δｎｍａｘ／ｎｍｉｎ１００％≤１０％，调速范围Ｄ≥１０；在满载运行条件下，可节约电能８０％以上。     

转炉炼钢静态模型的初步探讨

根据转炉炼钢的物理化学反应机理，从质量平衡和能量平衡的计算出发，通过小参数变动，导出了增量式静态模型中矿石方程和供氧方程的系数。所得结论与新日铁资料基本相符。同时，还进行了炉料和产物的计算，分析了改变废钢比对生产的影响。     

LM2717型双降压直流/直流变换器的原理及其应用设计

LM2717是美国国家半导体公司推出的一款全新的高性能变换器,内含两个脉宽调制(PWM)直流/直流转换器,功能强大.介绍了该器件的主要参数、工作原理和引脚功能,讨论利用LM2717进行应用设计时选择外部器件的原则及设计中应注意的问题.     

电源对介质阻挡放电(DBD)激发准分子(XeCl*)辐射的影响

本文对电源参数如电压幅值、频率及正负电压对介质阻挡放电激发准分子XeCl 紫外 (30 8nm)辐射的影响进行了实验研究。结果表明 ,UV辐射随电压幅度的增加而增强 ,但效率下降 ;提高频率 ,增加了放电次数 ,导致UV辐射的增强 ;此外 ,在较高的频率下 ,电压上升沿变陡 ,使得电子获得的能量主要用于原子的激发和电离。正、负电压放电的不对称源于电极结构的不对称而引起的放电过程的差异 ,负电压内电极可向放电管中馈入更多的能量 ;比较发光光谱可判断生成准分子的等离子体化学过程没有明显的差别     

基于分形理论的供应链管理模型分析

为了克服日益复杂的供应链问题,在分形理论的基础上介绍了分形供应链的概念和特点,认为分形供应链所具有的自相似、自组织、自优化等特点可以很好地提高供应链的灵活性,增强适应环境的能力.在此基础上进一步研究了分形供应链的结构模型和运作模型,探讨了其现实意义.     

Strategic appraisal of energy models for Mozambique

The needs that an energy supply system must meet are constantly changing, due to technological, social and political reasons. Effective energy planning is a dynamic process that is repeated periodically and adjusts to changing conditions. Energy decision makers and planners are no longer able to rely on inductive decision making since they have to investigate the effect of various decision parameters and possible future changes. To help in this process, models have been developed where estimates of future load growth, candidate power plants, fuels and other key factors can be introduced, from which the planners can evaluate decision parameters and the available alternatives. The paper presents the different methodologies and practices that are used by 11 energy models for energy demand forecasting, supply side management and generation expansion planning, demand side management and integrated resource planning. The paper concludes to the presentation of a strategic appraisal of the examined energy models appropriate for energy planning in Mozambique. Three models are proposed for conducting demand forecasting, generation expansion planning and demand side management. Copyright © 2002 John Wiley & Sons, Ltd.     

一种基于TDA16846的新型有源功率校正电路设计

介绍一种由集成电路芯片TDA16846完成的利用电荷泵(Charge Pump)实现的有源功率因数校正(APFC)技术。这种APFC电路的突出优点就是结构简单,通过对常规缓冲电路进行合理调整,可以很容易变成具有PFC功能的高性能开关电源。分析了APFC的工作原理,应用专用芯片TDA16846设计了电路图,并阐述了主要元件的功能。经实验证明,推荐电路设计合理,应用前景广阔。     

浅析分户供热的计量

本文介绍了国外在供热分户计量方面的测定原理、手段和设备,费用分配原则,仪表与系统的配合和安装方式,并就其与国内系统的配合提出了建议。     

关于供排水管网的水力计算和校核

以往对电站技术供排水系统大都未进行水力平差计算，致使一些实际电站的供排水系统达不到预期的效果，甚至影响机组的正常运行。据此，给出了供排水管网的平差计算方法，有利于正确评估电站管网，另外，提出了管网校核应注意的问题。     

Decentralized energy supply: Suitability for the UK's industrial sectors

From the results reported here it is suggested that policy decisions about the potential contribution of decentralized energy supply systems to UK industrial energy requirements should be based on the suitability of individual sectors rather than averaged over all sectors. The suitability of decentralized energy sources is evaluated, based on a themodynamic match between source and demand. This suitability criterion is used to identify the most appropriate sector in manufacturing industries for the adoption of decentralized energy supply, leaving aside economic cost considerations and individual site requirements.