微生物转化法合成L-酪氨酸

以对羟基苯甲醛、海因、氢氧化钠为原料 ,化学合成底物对羟基苯丙酮酸。采用来自大肠杆菌的天冬氨酸转氨酶对对羟基苯丙酮酸进行生物转化 ,并对转化条件进行了初步的研究 ,最终得到L-酪氨酸 ,转化率 75 %。     

Synthesis of AlPO4 Molecular Sieves with AFI and AEL Structures by Dry-Gel Conversion Method and Catalytic Application of Their SAPO Counterparts on Isopropylation of Biphenyl

AlPO₄-5 and AlPO₄-11 were synthesized by dry-gel conversion (DGC) method. Steam-assisted conversion (SAC) and vapor-phase transport (VPT) techniques were applied for this purpose. The synthesis was successful in presence of a certain minimum amount of external bulk water, without which the crystallization failed. Crystallization by VPT method was slower than corresponding SAC and HTS method. SAPO analogs of the samples, SAPO-5 and SAPO-11 were also synthesized by DGC method. Samples made by DGC methods had higher yield than the conventional hydrothermal synthesis (HTS); otherwise the samples showed similar characteristics as that made by HTS. XRD, SEM and N₂-adsorption results showed high crystallinity and purity of the samples made by DGC, and ²⁷Al MAS NMR spectra indicated the tetrahedral framework nature of Al. SAPO-5 and SAPO-11 were tested for their catalytic activity in isopropylation of biphenyl, and in terms of conversion and selectivity, SAPO-5 was found to be suitable for this application.     

Preparation,characterization, and some physical properties of polypropylene/poly(methyl acrylate)‐grafted glass wool composites

Polypropylene/poly(methyl acrylate)‐grafted glass wool (PMA‐g‐GW) mixes were prepared. The polymerization process was carried out using potassium persulfate (PPS) and PPS/acetone sodium bisulfite (ASBS) as a redox‐pair initiation system at 60 and 70°C. The effect of using PPS or PPS/ASBS on the grafting percent and conversion percent reveals that the conversion percent values on using PPS as an initiator are higher than those of PPS/ASBS, while in the case of grafting, the inverse is true, that is, using PPS as an initiator gives grafting percent values lower than those that can be obtained using PPS/ASBS. The dielectric properties, thermal diffusivity, specific heat capacity, and thermal conductivity of PP loaded with modified glass wool as a function of different types and concentrations of initiators—used in the grafting polymerization process, namely, PPS and the redox initiating system—were also studied. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 723–732, 2003     

燃料电池氢源技术--中低温乙醇水蒸气重整制氢研究

采用浸渍-热分解法制备了一种纳米Ni/Y2O3催化剂,并应用X射线衍射、BET比表面测试分析手段对该催化剂的结构性能进行了表征,采用固定床反应器对催化剂的催化性能进行测试。结果表明:该催化剂对乙醇的水蒸气重整反应表现出较高的活性和稳定性,可作为燃料电池氢源技术中乙醇重整器的候选催化剂。     

基于GDAL的ESRI Shapefile格式文件处理

随着遥感应用技术的不断发展,对ESRI Shapefile格式图像文件的处理需求变得日益紧迫。目前能对它进行处理的软件有很多,但是这些软件运行时占用大量系统资源,而直接将商业软件嵌入到自主开发的软件中也是不可取的。因此,能够在自主开发的遥感图像处理软件中实现对ESRI Shapefile格式文件的操作已经变得非常重要。通过对ESRI Shapefile格式的影像数据结构特征分析,提出基于GDAL实现ESRI Shapefile格式文件到png文件格式的转换和处理方法,包括地理信息获取、坐标系统转换和文件格式转换。通过试验验证了该方法的可行性。     

氧化还原引发降解天然橡胶与丙烯酸酯共聚的研究

研究了降解天然橡胶胶乳与丙烯酸甲酯、丙烯酸丁酯的聚合，以过氧化苯甲酰—N，N—三甲基苯胺(BP0—DMA)为氧化还原引发剂，考察了不同反应温度、引发剂配比、乳化剂用量及加料方式对单体转化率和接枝率的影响；用红外光谱对共聚物进行了表征。结果表明，采用乳化还原引发剂可使聚合反应低温快速进行，过量还原剂起阻聚作用，采用复合乳化剂可提高聚合反应速度和乳液稳定性，补加料可提高接技率。     

热管省煤器在120 kt/a硫磺制酸系统中的应用

介绍120kt／a硫磺制酸装置转化工段两台热管省煤器的结构特点和应用情况。转化器第三段出口冷换热器后的省煤器为水箱式热管省煤器，锅炉给水在水箱内与热管内工质换热；五段出口省煤器为夹套式热管省煤器，锅炉给水在套管与热管的间隙内被工质加热：两台热管省煤器的蒸发段与放热段之间均由管板隔离，以防止烟气对水侧管壁面的腐蚀，热管省煤器具有运行费用低、操作安全稳定等优点。通过严格控制锅炉给水质量和正确的开停车操作，近两年来热管省煤器运行良好，未发生泄漏故障：     

基于三电平逆变的开关磁阻发电系统的研究

新型开关磁阻发电机具有发电容量大、效率高、起动和发电组合容易等优点,三电平逆变器具有能减少开关损耗和滤波电感损耗并有降低开关应力等特点。利用三电平逆变器转换效率高的优势,结合新型开关磁阻发电机低风速发电特点,降低开关损耗和开关器件电压应力,提高装置可靠性。仿真实验结果表明:用三电平逆变器能够很好的实现开关磁阻发电机的逆变要求。     

基于ACS712的直流电机电流监测系统的设计

设计了直流电机运行电流的硬件采集电路,解决了高速下电枢绕组电流的采集问题。利用霍尔电流传感器ACS712通过AD转换将采集到的绕组电流数据,通过串口和上位机进行通信,实现了本机LCD液晶显示和基于LabVIEW的软件界面显示电流数据,具有实际的工程意义。     

PLC控制电梯教学模型的设计

根据电梯系统的结构特点及控制要求,设计了基于PLC控制的电梯教学模型。详细阐述了模型电梯系统的硬件构成和软件实现方法。试验表明,该实验装置提高了PLC实验课的教学质量。