国产CN—31催化剂与ICI65—2催化剂工业应用的比较

国产轻油预转化催化剂与进口催化剂相比,具有性能相当、价格低廉、供应方便等优势。国产预转化催化剂需在较高的液空速、温度较低的条件下实现烃类转化反应,生成含甲烷60%以上的富气。采用国产催化剂能明显反映性能价格比。文章对两种催化剂进行了工业应用比较和分析。     

数字视频混合系统的设计

介绍了利用Philips的一款视频芯片SAA71 99B实现的数字视频混合系统.该系统可以将一路PAL制彩色复合视频信号编码进入另一路PAL制彩色复合视频信号中,以取代第二路视频中用户指定的颜色,从而实现了两路视频的混合.另外还介绍了如何利用单片机的I/O口模拟I 2C总线以及如何利用单片机进行彩色空间变换的算法.     

Application of SiC-Si functionally gradient material to thermoelectric energy conversion device

Because of its high–temperature chemical stability, SiC ceramic is a promising material for high-temperature device applications such as thermoelectric energy converters. However, the electrical conductivity of SiC ceramic is too low for it to be used as a thermoelectric energy converter at the cold junction. Therefore, we propose a SiC-Si functionally gradient material (FGM) in order to improve the electrical conductivity of the SiC ceramic at the cold junction. An SiC rod was fired in a temperature gradient furnace. One end of the SiC rod was maintained at 2473 K and the other end was maintained at 1973 K for 30 min. After firing, the porous SiC edge fired at 1973 K was dipped into molten Si in order to infiltrate molten Si into the porous SiC. The microstructure of the FGM is classified into three regions: the SiC-Si composite material; the porous SiC ceramic; and the densified SiC ceramic. The electrical conductivity, the Seebeck coefficient and the thermal conductivity for each region of SiC-Si FGM was measured at 300 K; a figure of merit was calculated. The figure of merit of the SiC-Si FGM at the cold junction, at room temperature, was 10⁸ times higher than that of a nongradient SiC ceramic.     

A novel laboratory bench for practical evaluation of catalysts useful for simultaneous conversion of NOx and soot in diesel exhaust

This study deals with the development of a laboratory bench for the practical evaluation of catalysts that are useful for the direct conversion of NO_x and soot in the exhaust of diesel engines. The employed model exhaust is generated by using a diffusion burner with additionally dosing some gaseous components to the burner gas to obtain a realistic feed composition. The produced soot is extensively characterized by employing thermogravimetry, transmission electron microscopy, N₂ physisorption and temperature programmed techniques. The results of the different characterization methods show that the present soot is suitable for the intended catalytic investigations. The simultaneous conversion of NO_x and soot is examined like in practice, i.e. the soot is separated from the tail gas by a diesel particulate filter (DPF) that is coated with the catalyst. The deposited soot is then catalytically converted by NO_x and O₂ to form N₂ and CO₂. The conversions of NO_x and soot are measured by exclusively applying gas analysers, whereby a special experimental procedure is developed to determine the soot removal. Hence, additional soot related analytics are not required. To show the suitability of the constructed bench a Pt/Fe₂O₃/β-zeolite sample is taken as test catalyst that is reported to be very active in NO_x/soot reaction. The measurements performed with and without catalyst clearly show the effect of the used sample in simultaneous NO_x/soot conversion. We therefore consider the constructed laboratory bench to be a useful tool for testing and ranking catalytic materials.     

舰船导航信号发生器虚拟化设计

介绍了基于PC总线的便携式舰船导航信号发生器虚拟化设计，着重叙述该仪器硬件设计、基于虚拟仪器开发平台LabWindows／CVI的软件设计。     

催化部分氧化法制氢的水碳比控制与探讨

简要介绍了国内少有的干气催化部分氧化转化制氢工艺,重点讨论了转化水碳比的控制条件,对降低水碳比操作进行了有益地探讨。     

高非线性光纤及其应用

介绍了各种高非线性光纤的原理，并对其在超连续（SC）脉冲的产生和波长变换上的应用作了讨论。     

光纤喇曼放大器的功率转换效率分析

在定义光纤喇曼放大器(FRA)功率转换效率(PCE)的基础上,考察了不同工作条件下光纤喇曼放大器的功率转换效率,分析PCE与光纤喇曼放大器的输入信号功率、输入泵浦功率和光纤长度的关系,比较了分布式与集总式FRA的功率转换效率,给出提高FRA功率转换效率的途径。     

基于LonWorks和DSPs的智能节点

本文提出了一种基于LonWorks和DSPs的智能节点设计方案，并给出了具体的实现方法。该方案简单、可靠，充分利用了LonWorks强大的网络性、可靠性和DSPs强大的数据处理能力，大大提升了节点的智能化程度。     

用SY87721实现城域网波分复用系统的多业务接入

为了使城域网的DWDM（密集波分复用）系统可以接入多种信号速率和格式，以满足用户的要求，首先介绍了一种波长转换板的设计方法，使用SY87721自适应提取28Mbit／s～2.7Gbit/s之间任意速率信号的时钟，其次介绍了SY87721提取时钟的工作原理、与单片机和CPLD（复杂可编程逻辑器件）的接口方式、对寄存器的配置和读出方式。最后介绍了使用参考时钟测量接入信号频率的方法，这会在系统维护时带来较大的方便。