Synthesis and characterization of aromatic polyisoimides derived from PMDA and para-diamines. An approach to in situ generated rigid-rod molecular composites

A new concept for the processing and fabrication of rigid-rod molecular composites aiming at the elimination or minimization of phase separation is proposed. This approach calls for a coil-like aromatic polyisoimide which is soluble and compatible with an amorphous matrix polymer or thermosettable oligomer and can undergo facile transformation to the corresponding rigid-rod polyimide in solid composite state, thus imparting the inherently high strength/high modulus properties to the final form. To this end, various synthetic routes were explored to obtain para-diamines which could afford high molecular weight and aprotic-solvent-soluble polyisoimides upon polymerization with pyromellitic dianhydride (PMDA). Four such polyisoimides were prepared, with their inherent viscosities ranging from 0.25 to 1.89 dl g⁻¹ in dimethylacetamide at 30°C. Facile thermally induced isoimide-imide conversion was demonstrated by solid-state (film) Fourier transform infrared spectroscopy. A preliminary evaluation of the compatibility of the polyisoimide/matrix resin was made. In one instance, a film prepared from the polyisoimide derived from PMDA and 3,3′,5,5′-tetramethylbenzidine (TMB) showed no visually detectable phase separation.     

生物质转化的共性问题研究——生物质科学与工程学的建立与发展

生物质资源的高值转化是研究热点。由于现有的生物质利用技术存在的技术单一,缺乏系统性理论指导等问题,导致原料利用率低,经济效益差,难以实现工业化生产,迫切需要建立新的理论体系。通过深入分析生物质转化过程中的共性问题,在综合多学科知识的基础上,提出了生物质科学与工程学这一理念,从生物质原料工程学,生物质转化过程工程学和生物质产品工程学三方面对生物质利用技术进行了全面、系统的研究,为生物质类可再生资源的高值化利用提供了新的研究思路。     

黄金峡水利枢纽工程大型水泵机组选型设计及运行调节研究

引汉济渭工程黄金峡水利枢纽是陕西省境内一项重要的大型跨流域调水工程,泵站装机容量和设计流量均为目前国内甚至亚洲在建和已建泵站之最,且调水过程复杂、调水流量分布范围宽广。在分析黄金峡泵站调度原则及运行方式的基础上,综合比较目前国内外大型泵站机组设计制造水平、枢纽建筑物及机电设备投资等因素,详细论证了大型单级单吸离心式水泵机组台数和性能参数的确定方法及其影响因素,并给出了黄金峡泵站机组选型设计的最优方案,同时论证了采用变频调节的必要性及其效果。研究结果可为大型调水泵站机组的选型设计提供参考。     

催化精馏合成异丙苯过程催化剂装填结构研究

为考察不同催化剂装填结构对催化精馏合成异丙苯过程的影响 ,在热态反应器中进行苯烃化催化精馏合成异丙苯的研究。反应器直径为 3 0mm ,高 2 0 0 0mm ,所用催化剂为 β改性沸石分子筛。操作压力0 .7MPa ,温度 43 0— 480K ,苯质量空速 4— 6h- 1 ,苯烯摩尔比 1.1— 2 .2 ,回流比 9— 2 0。催化剂装填结构由不锈钢填料与催化剂颗粒组成 ,三种装填结构的空隙率分别为 85 .1% ,81.6%和 79.4%。结果表明 ,对于异丙苯合成体系 ,装填结构对催化精馏的总体效果起决定性影响。在催化剂装填总量不变的前提下 ,异丙苯的选择性与丙烯的转化率均随催化剂装填结构空隙率的提高而提高。在优化条件下 ,异丙苯的选择性达97% ,丙烯转化率接近 10 0 %。催化剂装填结构对异丙苯选择性的影响比对丙烯转化率的影响更显著     

Mechanisms of hydrocarbon conversion reactions on heterogeneous catalysts: analogies with organometallic chemistry

Catalysis is central to most industrial processes for chemical manufacturing. As catalytic processes have become more complex and more demanding, selectivity has become the central issue in their design. Selectivity is defined by the relative rates of competing reaction pathways available to crucial intermediates, and can be controlled by subtle changes in the nature of the catalyst, the reactants, and/or the reaction conditions. In order to be able to do this in a systematic manner, a good understanding of the catalytic reaction mechanisms is needed. Here a connection is drawn between the key elementary steps comprising hydrocarbon conversion reactions on surfaces and those known to occur on discrete organometallic complexes. This way, the hydrogenation, dehydrogenation, hydrogenolysis, chain growth, and isomerization reactions typical in heterogeneous catalysis are redefined in terms of hydride elimination, oxidative addition, reductive elimination, migratory insertion, and 1, 2-shift elementary steps, among others. It is suggested that the knowledge already available from organometallic chemistry can be used to further advance the understanding of the surface science involved in heterogeneous catalysis. Thanks to the commonality of the chemistry involved, a better synergy could also be established between homogeneous and heterogeneous catalytic development. These ideas are discussed in this article in a critical and personal way.*Invited contribution to the special volume entitled The Interface between Heterogeneous and Homogeneous Catalysis, stemming from contributions at the recent International Symposium on Relations between Heterogeneous and Homogeneous Catalysis, and dedicated to the memory of Robert L. Burwell.     

变频器在氯碱生产中的应用

介绍了交流电机变频调速的原理和注意事项,以便合理地使用变频器。     

废硫酸裂解制酸装置转化工序技术改造

介绍了中国石油抚顺石化公司石油二厂废硫酸裂解制酸装置的运行情况及转化工序存在的问题。对该工序进行了技术改造:更换了转化反应催化剂,调整转化工序换热流程,增加了换热器,去掉转化混合器,同时增加了转化工序设备和管线的保温层厚度。改造后装置运行平稳,硫酸转化率达到设计值,并多生产硫酸520万t/a,排放尾气中SO2的质量浓度低于960mg/m3,同时节约电耗100万kWh/a,实现了经济效益和环境效益的双增长。     

Qt在EQT格式地震日志转换中的应用

主要讨论了基于Qt的地震日志格式转换软件的设计及其实现方法。     

氨合成塔触媒升温还原中水汽浓度分析方法改进

采用电石转化氢焰色谱法,用TDX-01固定相为分离柱,分析氨合成塔触媒升温还原中水汽浓度。     

基于BIM数据的建筑抗震弹塑性分析建模技术

针对建筑信息模型(Building Information Model,BIM)的共享数据标准为IFC标准,但现有软件导出的IFC格式模型缺少关键数据,不能满足结构非线性抗震分析数据需求的问题,提出建筑抗震弹塑性分析数据基于IFC标准的表达方法,编写C++转换程序将BIM包含的数据正确地转换成不同软件(如Marc和OpenSees等)的模型,从而可以使用不同的结构分析软件实现建筑抗震弹塑性分析.该方法为基于BIM数据实现建筑抗震弹塑性分析提供参考.