基于DELPHI的镍氢电池管理系统软件设计

通过对镍氢电池性能的研究，给出了一个应用ISA总线技术构建的、基于DELPHI编程平台的镍氢电池管理系统的设计方案，重点介绍了该系统的软件技术和实现方法。     

Gasification of polyethylene using steam plasma generated by microwave discharge

Gasification of polyethylene (PE) pellet was studied using atmospheric argon-steam plasma generated by microwave discharge and the feasibility of the process was examined. The experimental results showed that additional steam to argon plasma promoted the weight decrease of PE and enhanced the production of H₂, CO, CO₂ and CH₄. The results confirmed that the treatment of plastics with the steam plasma was effective to obtain synthesis gas.     

Change of characteristics of desulfurization and denitrification by combustion flue gas composition and electrode configuration under pulsed corona discharge

Laboratory-scale and parametric experiments of SO₂ and NO_x removal from the simulated combustion gas by pulsed corona discharge have been performed by changing the combustion gas composition and temperature, the electrode configuration of plasma reactor, and the polarity of high-voltage electrode. The following results are obtained: 1) the higher the concentration of H₂O and O₂, the higher the efficiency of desulfurization and denitrification at the same specific input; 2) the pulsed corona discharge with a voltage pulsewidth as short as 200 ns of negative polarity shows the possibility to attain almost 90 percent deSO_x and deNO_x efficiency at the specific discharge input of 20 J/g, which is almost the same as the specific input in the electron-beam process; 3) the deNO_x characteristics show a little temperature dependence in the range of 70 to 130°C, but the deSO_x efficiency increases rapidly in the temperature region below 100°C suggesting the thermochemical dependence of deSO_x reaction; 4) when desulfurization and denitrification proceed, the white dendritic powder deposits on the plasma reactor whose composition is identified to be 49 mol% (NH₄)₂SO₄ and 47 mol% of 2NH₄NO₃ · (NH₄)₂SO₄, and the ratio of SO₂, NO and NH₃ of the deposit is almost equal to that of supplied gas.     

High‐pressure processing effects on the mechanical,barrier and mass transfer properties of food packaging flexible structures: a critical review

Food products can be high‐pressure processed (HPP) either in bulk or prepackaged in flexible or semi‐rigid packaging materials. In the latter case the packaging material is subjected, together with the food, to high‐pressure treatment. A number of studies have been performed to quantify the effects of high‐pressure processing on the physical and barrier properties of the packaging material, since the integrity of the package during and after processing is of paramount importance to the safety and quality of the food product. This article reviews the results of published research concerning the effect of HPP on packaging materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Thermally stimulated discharge current studies in pure and fe-doped polystyrene films

Studies were made on the thermally stimulated discharge currents (TSDCs) in pure (undoped) and Fe-doped polystyrene films as a function of polarizing field, polarizing temperature and dopant concentration. While undoped films exhibited a single peak, doped films showed two peaks one at low temperatures and another at high temperatures. The low temperature peak, which exhibits a shift towards lower temperatures with increasing dopant concentration, is attributed to the relaxation of the main chain, while the high temperature peak, which shows a tendency to shift towards higher temperatures with dopant concentration, is due to space charge polarization. The TSDCs were higher for low dopant concentrations than their undoped counterparts, while for high concentrations of the dopant, the TSDCs decreased. Formation of charge transfer complexes at low dopant concentrations and molecular aggregates at higher dopant concentrations are suggested as the possible reasons for this behaviour.     

Changes in the dielectric relaxations of water in epoxy resin as a function of the extent of water ingress in carbon fibre composites

Dielectric relaxation measurements are reported over a frequency range from 10⁻¹ to 10⁹ Hz as a function of exposure time for an epoxy resin-carbon fibre composite, ageing at 60 °C in water. Investigation of the nature of the dipole relaxation of the water molecules, indicates the nature of their interaction with the polymer matrix. Analysis of the dielectric relaxation spectra allow identification of processes that can be attributed to ‘free’ and ‘bonded’ water, water in micro-cracking, located in carbon fibre disbonds and plasticizing the polymer matrix. Identification of the various types of location in which water exists was aided by use of the N_g factor from the Kirkwood-Frölich equation, which describes the constraints on free dipole ration nature imposed by the environment in which it is located. These data indicate the power of the dielectric technique for quantitative analysis of water ingress into epoxy composites.     

Two possible emission mechanisms involved in the arc discharge method of carbon nanotube preparation

By investigating the morphologies and microstructures of the cathode deposits prepared by self-sustained arc discharge between graphite rods, we consider that there are two electron emission mechanisms occurring on the cathode: field emission and thermionic emission. The former occurs mainly on the edge of the growing surface, by which we can explain the formation of the outer hard shell of the cathode deposit; while the latter occurs mainly on the growing surface except for the edge area and it is the main cause for the growth of carbon nanotubes.     

Synthesis of carbon nanocapsules containing Fe, Ni or Co by arc discharge in aqueous solution

A simple, inexpensive and one-step synthesis method of metal-containing carbon nanocapsules using an arc discharge in aqueous solution is reported. It was found that Ni, Co and Fe nanoparticles could be in situ encapsulated in carbon shells when the arc was performed respectively in aqueous solutions of NiSO₄, CoSO₄ and FeSO₄. Transmission electron microscopy, energy dispersive X-ray spectroscopy and electron diffraction patterns of selected areas were used to determine the crystalline phase of the metal cores. To explain the formation mechanism of metal-containing carbon nanocapsules, a model of discharge in solution is proposed. This result presents a simply controllable way to synthesize metal-containing carbon nanocapsules.     

Synthesis, isolation, spectroscopic and electrochemical characterization of some calcium-containing metallofullerenes

A few Ca-containing mono-metallofullerenes, i.e. Ca@C₇₆, Ca@C₈₈, Ca@C₉₀ (I, II), were synthesized by an improved DC arc discharge method and isolated by a multi-stage HPLC method for the first time. These isomer-separated metallofullerenes were characterized by LD-TOF MS and UV-vis-NIR spectrometry. Their HOMO-LUMO band gaps and possible molecular geometries are discussed according to the absorption spectra in this report. In addition, the cyclic and differential pulse voltammetry of Ca@C₇₆ was conducted in MeCN/C₆H₅CH₃ (1:4 v/v). The voltammograms of Ca@C₈₂ (II, III) and Ca@C₈₄ (II) were also recorded. Their electrochemical behaviors are discussed compared with those of corresponding ytterbium metallofullerenes. The features of the Ca metallofullerenes’ electronic structures are also discussed.