Barrier layer effect of tantalum on the electromigration in sputtered copper films on hydrogen silsesguioxane and SiO2

As IC devices scale down to the submicron level, the resistance-capacitance (RC) time delays are the limitation to circuit speed. A solution is to use low dielectric constant materials and low resistivity materials. In this work, the influence of underlying barrier Ta on the electromigration (EM) of Cu on hydrogen silsesquioxane (HSQ) and SiO₂ substrates was investigated. The presence of a Ta barrier not only improves the adhesion between Cu and dielectrics, but also enhances the crystallinity of Cu film and improves the Cu electromigration resistance. The activation energy obtained suggests a grain boundary migration mechanism and the current exponent calculated indicates the Joule heating effect.     

微波复合介质基板性能研究

采用微扰法、螺旋圆柱谐振法和带状线谐振法分别对聚四氟树脂复合精细电子陶瓷微波复合介质的复介电常数进行了测量与误差分析。基于扫描电子显微镜 (SEM )观察 ,从微观上解释了辊压工艺对介质介电性能一致性改善的原因。研究了不同的表面处理方法对基板金属化剥离强度的影响规律。     

阴极爆炸发射电子电离气体原初过程的动力学模拟

基于阴极爆炸发射电子和电子对气体的碰撞电离模型 ,用胞中粒子 (PIC)模拟方法对单间隙冷阴极气体放电过程中阴极爆炸发射产生的电子和电子碰撞电离产生质子的动力学特性进行了研究。分别给出了在 1.33× 10 - 2 Pa氢气压和 10kV间隙电压下 ,气体放电过程中电子和质子的空间和相空间分布、速度统计分布以及轴线上电荷密度分布 ,分析了阴极爆炸发射电子电离过程。模拟结果表明 ,间隙中电子的最大速度达 5 .8× 10 7m/s ,而只有少数的气体电离产生的质子最大速度达到 1.3× 10 6 m/s。     

福建大樟溪流域综合规划的环境影响研究

从流域和区域对水资源需求及环境保护要求出发,提出了在大樟溪干流刘岐、岩前和莒口增设鱼道、取消船闸和航运的建议;从流域环境保护要求提出了主要水库的最小下泄流量;根据大樟溪流域人口、经济及土地资源的状况,提出了从泉州、莆田和福州等水资源受益区安置移民缓解土地资源紧张的模式来提高龙湘水库的调节库容,以提高流域及区域对水资源需求与调配能力,确保河道生态安全、生产生活用水安全等流域规划的新思路、新理念。     

浮体门设计的探索与实践

水电站泄水道破坏修复工程,是一项风险高、难度大、前景广阔的系统工程。刘家峡水电站泄水道2号孔破坏修复的关键,是采用人工深水软导向浮体闸门封堵孔口,形成门后洞内旱地施工条件;龚嘴水电站10号冲砂底孔破坏修复的关键,增设浮体闸门采用自动潜行式浮体闸门封堵孔口,形成门后洞内旱地施工条件;哈萨克斯坦CHARDARA水电站SYNAS项目泄水底孔修复的关键,采用分次降水安装浮体闸门侧支承的方法,挡住引水发电机组的下游尾水,在泄水道进口检修门和流道出口之间形成门旱地施工。此3项泄水道修复工程在行业内没有先例,难度很大。整体方案具有创新性,并且均已高质量竣工并投入正常运行。     

La doping effects on intergrowth Bi2WO6–Bi3TiNbO9 ferroelectrics

La doping effects on intergrowth Bi₂WO₆–Bi₃TiNbO₉ ferroelectric ceramics were studied by X-ray diffraction, electron probe microanalysis and dielectric spectroscopy. It was found that the La³⁺ distribution, ferroelectric phase transition and dielectric relaxation behavior are apparently affected by La doping. With increasing La³⁺ content, the site of dopant ion varies, the grain growth of Bi₅TiNbWO₁₅ is restrained, the Curie temperature is reduced and broadened. Furthermore, two dielectric relaxation loss peaks were observed both in temperature and frequency spectra. The calculated relaxation parameters revealed the oxygen vacancy related to the relaxation process.     

Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals

SrTiO₃ and ZnO bicrystals with various types of boundaries were fabricated in order to examine their current–voltage characteristics across single grain boundaries. Their grain boundary structures were also investigated by high-resolution transmission electron microscopy. In Nb-doped SrTiO₃, electron transport behaviors depend on the type of boundaries. Random type boundaries exhibit highly non-linear current–voltage characteristics, while low angle boundaries show a slight non-linearity. On the contrary, undoped ZnO does not exhibit non-linear current–voltage characteristics in any type of boundaries including random ones. It is suggested that the differences observed in current–voltage properties between the two systems are mainly due to the difference in the accumulation behavior of acceptor-like native defects at grain boundaries. A clear non-linearity is obtained by means of Co-doping even for the highly coherent Σ1 boundary in a ZnO bicrystal. This is considered to result from the production of acceptor-like native defects by Co-doping.     

Thermal Conductivity Measurement of an Electron-Beam Physical-Vapor-Deposition Coating

An industrial ceramic thermal-barrier coating designated PWA 266, processed by electron-beam physical-vapor deposition, was measured using a steady-state thermal conductivity technique. The thermal conductivity of the mass fraction 7 % yttria-stabilized zirconia coating was measured from 100 °C to 900 °C. Measurements on three thicknesses of coatings, 170 μm, 350 μm, and 510 μm resulted in thermal conductivity in the range from 1.5 W/(m·K) to 1.7 W/(m·K) with a combined relative standard uncertainty of 20 %. The thermal conductivity is not significantly dependent on temperature.     

变压器事故原因分析

通过分析一次变压器事故的原因。指出变压器实际运行中存在的问题。并结合自己的工作经验提出科学的改进建议。     

SF6气体绝缘电容式电压互感器研制

本文介绍西容公司新研制的一种完全无油化的SF6气体绝缘电容式电压互感器,提出了关键技术问题解决方案和产品绝缘结构的设计思路.并介绍了研制成功的110kV和220kV系列产品的结构、技术参数、性能指标、试验考核情况和产品特点.