基于ARM芯片$3C4510的步进电机加减速控制

在经济型数控机床中，步进电机的应用非常广泛，它具有简单易用等显著优点。但要想充分发挥它的优点就必须解决步进电机启动和停止时容易产生的失步和过冲的现象。本文选择高性能的ARM微处理器，采用不断修正定时器初值，从而改变定时中断脉冲频率的方法控制步进电机的启动和停止过程。取得了良好的控制效果，并给出了具体的计算公式和软件实现。     

用气冲气推成形触头造型机制造电机壳铸型的试验研究

扼要介绍了用气冲气推成形触头造型机制造电机壳铸型的成型过程及其实砂效果,试验结果表明,在工作气压为0,4￣0.45MPa的条件下,气冲气推成形触头造型机对电机壳类铸型的紧实,实砂效果十分理想,砂型紧实度高而且均匀。     

磁性材料产业现状与展望

介绍磁性材料的主要品种，如永磁体、软磁体和磁记录介质材料的行业现状及技术进步。     

An adaptive neural control scheme for articulatory synthesis of CV sequences

Reproducing the smooth vocal tract trajectories is critical for high quality articulatory speech synthesis. This paper presents an adaptive neural control scheme for such a task using fuzzy logic and neural networks. The control scheme estimates motor commands from trajectories of flesh-points on selected articulators. These motor commands are then used to reproduce the trajectories of the underlying articulators in a 2nd order dynamical system. Initial experiments show that the control scheme is able to manipulate the mass-spring based elastic tract walls in a 2-dimensional articulatory synthesizer and to realize efficient speech motor control. The proposed controller achieves high accuracy during on-line tracking of the lips, the tongue, and the jaw in the simulation of consonant–vowel sequences. It also offers salient features such as generality and adaptability for future developments of control models in articulatory synthesis.     

Extraction and implementation of muscle synergies in neuro-mechanical control of upper limb movement

This work faces the redundancy problem, a central concern in robotics, in a particular force-producing task by using muscle synergies to simplify the control. We extracted muscle synergies from human electromyograph signals and interpreted the physical meaning of the identified muscle synergies. Based on the human analysis results, we hypothesized a novel control framework that can explain the mechanism of the human motor control. The framework was tested in controlling a pneumatic-driven robotic arm to perform a reaching task. This control method, which uses only two synergies as manipulated variables for driving antagonistic pneumatic artificial muscles to generate desired movements, would be useful to deal with the redundancy problem; thus, suggesting a simple but efficient control for human-like robots to work safely and compliantly with humans.     

基于磁流变阻尼器的车辆悬架系统模糊半主动控制

在对磁流变液和磁流变阻尼器的研究基础上 ,以磁流变阻尼器作为半主动控制元件组成模糊半主动悬架系统。运用数值仿真和试验研究等方法对基于磁流变阻尼器的模糊半主动悬架进行了研究。数值仿真和试验结果表明 ,设计的模糊半主动控制算法可对基于磁流变阻尼器的半主动控制悬架实现有效的控制     

WATER MIST FLOW IN A SUPERCONDUCTING MAGNET INCLINED AT VARIOUS ANGLES

Water mist (diamagnetic) flow in a superconducting magnet of 10 T at various angles is studied experimentally and numerically. Water mist is produced by ultrasonic atomizers and fed into a cylindrical Plexiglas pipe (inner diameter, 90 mm) placed in a bore space of an inclined superconducting magnet. The water mist is found to stop at some locations in the magnet at inclined angles ψ ≤ π/6. At ψ ≥ π/4, the amount of mist flowing out of the other opening of the pipe increases with an increase in inclined angle. In the computation of this phenomenon, water mist is simulated with 1000 water droplets of 3 μm diameter. Brownian motion is considered and the Langevin equation is solved. The numerical results show that at ψ ≤ π/6, most of the water droplets accumulate above the magnetic coil. However, at ψ ≥ π/4, with an increase in inclined angle, the number of water droplets passing through the magnetic coil increases.     

基于CPLD的光电编码器角位移拟合测速法

针对常用的M法和T法无法满足增量式光电编码器整个测速范围内误差要求的问题,提出了对码盘信号进行角位移拟合求采样时刻即时速度的新方法,在匀加速条件下对这3种方法进行了仿真实验,比较了测速误差。实验结果表明,角位移拟合法在整个速度范围内都能获得很高的测速精度和误差一致性。最后用CPLD对该方法加以实现,给出了Verilog硬件描述语言的设计程序和3种方法的实验结果比较。基于CPLD的实现方法电路简单,运行稳定可靠,处理速度快,为角位移拟合法提供了一种非常好的实现方法。     

基于受扰动的PMSM系统动力学研究及模拟

借助Lyapunov函数稳定性理论和最优化理论研究了永磁同步电动机系统解的界,得到了它的界估计。通过计算机模拟,数值模拟验证了计算理论的可行性。     

基于LabVIEW的航空无刷同步电机监控系统设计

针对航空无刷同步电机起动控制过程复杂,需要监测的状态与控制的参数过多,造成调试困难及存在安全隐患的问题,利用LabVIEW开发环境设计了航空无刷同步电机起动运行监控系统。该监控系统基于Modbus通信协议编写,具有很好的通用性。通过在航空无刷同步电机起动控制实验中的应用,验证了该监控系统具有良好的实用性和可扩展性。