便携式无线通信中的陶瓷技术

重点讨论了现代无线通信中关键元器件之一滤波器的发展进程,中、高频及微波滤波器的主要类型及性能特点。低损耗、高介电常数陶瓷在RF和IF滤波器中的应用,能够实现无线设备的微型化。对制备滤波器的介质陶瓷材料的要求是:在所使用的波段内,相对介电常数r要大,可缩小介质元件的尺寸;品质因数Q要高,可获得良好的滤波特性及通讯质量;谐振频率的温度系数f接近于零或可调节,以达到整机电子回路的要求。     

基于RBF网络和IMM的机动目标跟踪方法

文中提出了一种应用RBF神经网络对标准IMM算法中的卡尔曼滤波结果进行校正的方法。网络输人为预测误差、卡尔曼增益以及测量值与估计值之差．网络输出反映了由于目标机动所带来的滤波误差．将网络输出结果和直接由卡尔曼滤波求解得到的结果相加．可以得到更为准确的滤波值。同时．在网络的学习算法中．在网络权值矩阵的修正公式中增加了反映滤波残差的调整项．若卡尔曼滤波的残差较大，网络调整权值的幅度也相应增大。仿真结果表明．在目标发生机动转弯处．校正后的IMM算法的跟踪误差要明显小于标准IMM算法的跟踪误差．跟踪精度较高。     

STATIONARY AND NON-STATIONARY STATE SPACE MODELS

Abstract. The concepts of time invariance, stationarity, non-stationarity and immemorial time are considered for state space models (SSMs). Necessary and sufficient conditions for stationarity are given and connected with standard conditions. Expressions are given for the unconditional mean and covariance matrix of the state of a time-immemorial SSM. Application of the results is made to a variety of theoretical and empirical models and the initialization of the Kalman filter in the non-stationary case and for the ARIMA ( p, d, q ) model.     

应变式压力传感器特性补偿和应用

讨论了用动态补偿数字滤器对应变压力传感器的动态特性进行补偿，使之提高测量精度并能用于爆炸冲击波测量的一种方法。实验结果与经验值比较，补偿前．后对比、测量精度有明显提高，说明在一定条件在变式测压系统也可用于爆压的测试。     

降低过滤机滤饼水分和细粒煤脱水浅析

根据对选煤厂细粒煤样的实验室优化脱水试验、工业试验及分析结果 ,对真空系统、气水分离器和分配头实施了技术改造 ,细粒煤脱水系统的运行状况得到显著改善 :圆盘真空过滤机滤饼水分降到 2 0 %左右 ,脱饼率在 95 %以上 ,每年的直接经济效益可达 30 0多万元     

数字振荡器的实现原理与仿真编程

鉴于数字信号处理中的实时应用问题，探讨了数字滤波器的实时实现原理，包括离散时间网络结构的作用和离散时间信号处理的特点，重点介绍了实时应用中实现数字滤波器的基本思想，运用MATLAB和所导出的通用数字振荡器的系统函数对一个非正弦数字振荡器进行了仿真编程，还讨论了有关实时处理的几个重要的系统性质，表达了作者对于当前学习和应用数字信号处理方法的观点。     

Filtration of liquid aerosols with a horizontal fibrous filter

The aim of this study was to determine the filtration efficiency and pressure drop in liquid aerosol capture mechanisms using a fibrous coalescent filter. The experimental set-up was designed to measure filtration efficiency and pressure drop through the filter. To avoid the gravimetric effect, the filter was placed horizontally. A series of experiments highlighted the importance of operating conditions such as filtration velocity and aerosol concentration. The results demonstrated the advantage of working at high velocities to minimise the resistance of the medium and to enhance the mass efficiency of the coalescent filter. In parallel, no effect of aerosol concentrations in the pressure drop increase was noted.     

片式抗电磁干扰滤波器Ni-Zn铁氧体材料与工艺研究

通过添加适量CuO和Bi2O3，将Ni-Zn铁氧体材料的烧结温度降至870—920℃，达到Ni-Zn铁氧体材料与Ag电极共烧匹配的目的。试制了片式抗电磁干扰滤波器，并对其插入损耗特性进行了计算机模拟，表明所研制的抗电磁干扰滤波器不仅适合高密度表面封装技术的要求，也可满足宽频域抗电磁干扰需要。     

电子镇流器的电磁兼容问题研究

电磁兼容是目前电子镇流器最需要解决的问题之一。介绍了电子镇流器产生的辐射干扰、传导干扰及电流谐波畸变干扰的形成和所造成的影响,分析了产生这些干扰的原因,并分别给出了抑制这些干扰的方法,最后就电子镇流器设计制造中的难点问题作了简要说明。     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry