STM32F207和DM9161A的以太网实现方案

电力抄表系统常通过网络采集和传输电网中的谐波等信息。本文提出了一种适合电力系统的网络设计方案。在STM32F207和DM9161A为核心的硬件平台上,完成了LwIP协议栈的移植,实现了远程终端和上位机通信。使电力系统更具实时性与交互性,并保证了通信的可靠性。     

Influence of base resistance on extracting thermal resistance for SiGe HBTs

In this article, the influence of base resistance on extracting thermal resistance for SiGe heterojunction bipolar transistors is studied and an improved approach for determining the junction temperature and thermal resistance is presented. The proposed method for extracting thermal resistance is based on the temperature sensitivity of the base–emitter (B–E) voltage when the device is biased with a fixed emitter current density. This approach not only takes into account the self‐heating during the different ambient temperature measurement but also revises the empirical equation of B–E voltage due to the influence of base resistance during the power dissipation increment measurement. Results are obtained for devices with different emitter lengths and fingers. Compared with the conventional method, the thermal resistance is about up to 15% improvement for the device with 0.3 × 1.9 μm² emitter area and 13.8% for the device with 0.3 × 13.9 μm² emitter area. The accurate thermal resistance implemented in HICUM model has resulted in better fit for transistor output characteristics. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

可视化基站发电管理系统

针对以前的发电管理系统或只是数据呈现,提供市电及发电相关数据信息,或只是提供出车轨迹,主要实现对出车的管理,不能全面反应发电全过程且不便于对发电事件进行分析的情况,提出可视化发电管理系统的概念。在简要介绍了LBS系统、动力环境监控系统后,讲述了可视化基站发电管理系统的组成以及通过LBS定位管理、短信互动、实时监测数据等进行系统实现。可视化发电管理系统通过可视化的界面帮助发电管理人员进行管理,直观、便捷。     

专用电话系统集中录音方案

数字录音系统是进行核对和事故追忆与分析的重要设备,目前,轨道交通数字录音系统普遍存在着录音信息不全或造价高昂的问题,在分析专用电话系统的组成及录音现状的基础上,提出了对专用电话系统的集中录音方案,介绍了集中录音的系统原理及特点,证明了集中录音能够满足专用电话系统对重要终端录音的需要。     

基于LabVIEW的高温超导脉冲功率状态监控系统

脉冲功率数据采集系统是确保脉冲功率系统稳定安全运行的关键之一,超导脉冲功率系统由超导储能系统和外部放电电路组成。本文设计了基于LabVIEW的超导脉冲功率状态监控系统,该系统由多路传感器、信号调理电路和高精度数据采集系统构成,实现了对超导脉冲功率系统各个数据的精确采集,并利用虚拟仪器强大的数据处理能力,实现了对超导脉冲功率系统运行状态的准确判断,实验结果表明设计的状态监控系统能够有效地监控高温超导脉冲功率系统的运行状态。     

The need and prospects for improved fusion reactors

Conceptual fusion reactor studies over the past 10–15 yr have projected systems that may be too large, complex, and costly to be of commercial interest. One main direction for improved fusion reactors points toward smaller, higher-power-density approaches. First-order economic issues (i.e., unit direct cost and cost of electricity) are used to support the need for more compact fusion reactors. The results of a number of recent conceptual designs of reversed-field pinch, spheromak, and tokamak fusion reactors are summarized as examples of more compact approaches. While a focus has been placed on increasing the fusion-power-core mass power density beyond the minimum economic threshold of 100–200 kWe/tonne, other means by which the overall attractiveness of fusion as a long-term energy source are also addressed.Nomenclature a Plasma minor radius at outboard equatorial plane (m) - A Plasma aspect ratioR _T /a - AC Annual charges ($/yr) - b Plasma minor radius in vertical direction (m) - B Magentic field at plasma or blanket (T) - B _c Magnetic field at the coil (T) - B Toroidal magnetic field (T) - B Poloidal magnetic field (T) - BOP Balance of plant - C Coil - COE Cost of electricity (mills/kWeh) - CRFPR Compact RFP reactor - CT Compact torus (FRC or spheromak) - c _FPC Unit cost of fusion power core ($/kg) - DC Direct cost ($) - DZP Dense Z-pinch - E Escalation rate (1/yr) - EDC Escalation during construction ($) - ET Elongated tokamak - F Annual fuel charges ($/yr) - FC Component of UDC not strongly dependent or FPC size ($/kWe) - FW First wall - FPC Fusion power core - f _Aux Fraction of gross electric power recirculated to BOP - f ₁ (IC+IDC+EDC)/DC - f ₂ (O&M + SCR + F)/AC - IC Indirect cost ($) - IDC Interest during construction ($) - I _w Neutron first-wall loading (MW/m²) - i Toroidal plasma current (MA) - j Plasma current density, I/a² - k _B Boltzmann constant, 1.602(10)^–16 (J/keV) - LWR Light-water (fission) reactor - MPD Mass power density 1000P_E/M_FPC (kWe/tonne) - M _N Blanket energy multiplication of 14.1-MeV neutron energy - M _FPC Mass of fusion power core (tonne) - n Plasma density (m^–3) or toroidal MHD mode number - O&M Annual operating and maintenance cost ($/yr) - p _f Plant availability factor - PFD Poloidal field dominated (CTs, RFP, DZP) - P Construction time (yr) - P_TH Thermal power (MWt) - P _E Net electric power (1-)P _ET (MWe) - P_ET Total gross electric power (MWe) - p_f Fusion power (MW) - q Tokamak safety factor (B /B _gq )(a/R _T ) - q _e EngineeringQ value, 1/e - R _T Major toroidal radius (m) - RFP Reversed-field pinch - RPE Reactor plant equipment (Account 22) - S Shield - SCR Annual spare component cost ($/yr) - SSR Second stability region for the tokamak - S/T/H Stellarator/torsatron/heliotron - ST Spherical tokamak or spherical torus - T Plasma temperature (keV) - TDC Total direct cost ($) - TOC Total overnight cost ($) - UDC Unit direct cost,TDC/10 ³ P _E ($/kWe) - V _p Plasma volume (m³) - W _p Plasma energy (GJ) - W _B Magnetic field energy (GJ) - Magnetic utilization efficiency, 2nk_BT/(B ²/2₀) - ₀ Permeability of free space, 4(10)^–7 H/m - XE Plasma confinement efficiency, a²/4_E - _e Plasma energy confinement time - _p Overall plant efficiency, _TH(1-) - _TH Thermal conversion efficiency - _FPC AverageFPC mass density (tonne/m³) - Plasma vertical elongation factor,b/a - Thickness of allFPC engineering structure surround plasma (m) - Total recirculating power fraction, (P _ET-P _E)/P _ET, or inverse aspect ratioa/R _T This work was performed under the auspices of USDOE, Office of Fusion Energy.     

变频开关电源Fuzzy-PID控制器的设计

针对感应式变频开关电源在对金属材料进行热处理过程中，负载的等效参数和谐振频率发生变化，而变频电源的输出频率不能及时调整和跟踪的问题，结合PID和Fuzzy控制技术的优点，设计Fuzzy-PID控制器对变频电源进行控制，在大偏差时用Fuzzy控制，在小偏差时用PID调节。Fuzzy-PID控制器以单片机8098为核心，采用SPWM专用芯片SA4828，实现变频开关电源的电压、电流双闭环控制，使变频电源不仅具有较快的动态响应、更小的超调，并且具有较高的稳态精度和频率跟踪控制特性。     

POWER CONSUMPTION WITH ANCHOR MIXERS EFFECT OF BOTTOM CLEARANCE

The effect of bottom clearance on power draw for anchors is investigated. The results suggest that power input decreases as the bottom clearance ratio b/D increases. A new correlation is proposed in which both bottom and wall clearance effects on power input are considered. The dependence of power input on these effects is additive rather than multiplicative. Thus, the total power consumption is the sum of the power inputs generated by the wall and bottom clearance. Power results from 3D-CFD numerical simulations are also presented. These results confirm fairly well the experimental points.     

节涌流化床压力波动动力学研究(Ⅱ)模拟与实验

研究了节涌流化床多自由度随机波动模型参数,提出了确定气栓和料栓长度的试差迭代法、床层底部的“白噪声”扰动函数和床层表面的正态扰动函数.模型模拟计算的结果对于节涌流化床波动结构的动力学特征、压力波动的频谱特征和波动的传播与衰减等与实验结果取得了较好的吻合.     

基于多步迭代算法的数字预失真技术

为了更好地补偿功率放大器的非线性,提出一种新型多步迭代算法来求取数字预失真器。新算法结合了多步迭代算法与频域削峰技术,使功放在保证工作效率的同时更大程度提高其线性度。实验结果显示,该方法较传统的线性化技术有明显优势,功放输出信号的ACPR可改善20.66 dB。