基于ARM无功补偿控制系统设计

随着用电需求的增大,电网中感性用电设备对无功功率的需求日益增大,被消耗的无功若得不到及时补偿,将严重影响电网的运行效率。为此,本文以模糊PID参数自整定为控制策略,设计了基于ARM无功补偿控制器,将传统的PID控制和模糊控制相结合,通过模糊推理来达到PID参数自调整的目的。设计采用实时多任务、可移植的嵌入式μC／OS—Ⅱ操作系统,以32位RISC微处理器s3C2440为控制中心,采用RS-485完成于上位机之间的信息传输。该控制系统控制精度高,设计更为简单,易于实现,达到了预期目标,具有很好地应用前景。     

通信运营商政企客户机房供电系统优化设计

政企客户是通信运营商最重要的客户资源,是各大通信运营企业争夺的焦点,为政企客户提供稳定、高效、可靠、安全的接入服务是竞争胜负的关键;本文通过对电信政企客户机房现有交、直流供电系统存在的问题与安全隐患进行分析总结,着重研究适合政企客户机房高可靠性的交、直流供电系统;并通过理论计算及工程实践,提出优化政企客户机房供电系统的可实施方案,同时设计出相应的交、直流供电系统优化示意图,以满足市场开发及政企客户对于通信运营商供电系统的安全、可靠、合理及适用性要求。     

网络线缆分析仪近端串扰的校准研究

针对网络线缆分析仪近端串扰的校准,提出了一种利用阻抗转换器和步进衰减器来解决网络线缆分析仪和矢量网络分析仪量值传递中的阻抗不匹配、连接端口不同的难题的方法,并给出了详细的阻抗转换器的设计制作原理图.通过实验数据和不确定度评定分析,证明了阻抗转换器和步进衰减器校准近端串扰的有效性、可行性,为网络线缆分析仪校准规范的实施和...     

手机用TFT-LCD驱动控制芯片电源模块设计

电源模块是TFT-LCD驱动控制芯片内置模拟电路的一个重要组成部分,其性能直接影响着芯片的功耗以及彩屏手机的显示画质。文章从TFT-LCD的驱动原理出发,提出了一种低功耗、易调节的电源模块设计思想,所产生的电压值可实现编程控制。用Hspice对采用0.25μmCMOS工艺设计的电路进行仿真表明,系统在启动200ms后能够生成稳定、正确的驱动电源电压,其静态功耗小于2mW。     

X 波段功率驱动模块的设计与实现

本文论述了一种X波段10W功率驱动模块的设计和实施方案,对模块的高频部分和偏压电路的工作原理和设计思想进行了论述。功率模块的偏压电路可实现模块的供电、调制、保护和温度补偿等功能。功放模块的测试结果表明,模块输出功率大于10W、上升下降沿小于150ns,杂散小于-65dBc。     

Realization of an active inductance for a low power high bandwidth DC power line communication network transceiver

An active inductor based on an improved gyrator circuit is proposed. The active inductor is developed to be implemented in a high impedance transceiver for a wearable DC power line communication network where requirements such as low power consumption, high bandwidth and numerous nodes support are prioritized. A load isolation step is introduced to ensure the stability of the active inductance's size on different load currents. The proposed gyrator circuit is analyzed and optimized by means of theoretical calculations. The theoretical results are then verified by simulations and experiments in the frequency range up to 10 MHz.     

射频同轴电缆屏蔽衰减测试方法的比较

屏蔽衰减是表征射频同轴电缆电磁兼容性的重要指标。随着电缆相关理论的发展和应用,国际上出现了各种不同的针对射频同轴电缆屏蔽衰减的测试方法。介绍了当前各类典型的测试方法,并对其进行了比较。     

射频同轴电缆特性阻抗测量方法的探讨

特性阻抗是设计和选用射频同轴电缆时很重要的电气参数。从工程应用出发,介绍几种在生产中常用的特性阻抗测量方法。经过实测比较后,特别推荐一种便捷、实效的通过测量单个连接器电压驻波比获得射频同轴电缆特性阻抗的方法。     

Energy Harvesting in Cognitive Networks with Cooperative Beamforming: Power Allocation and Stability Analysis

Energy harvesting (EH) is a promising technology to improve both energy efficiency and spectral efficiency in cognitive radio (CR) networks. However, due to the randomness of the harvested energy and the interference constraint at the primary users (PUs), the limited transmission power of secondary users (SUs) may reduce the service rate of SUs. To solve this problem, this paper investigates a cooperative transmission method where a zero-forcing beamforming method is used in the EH based secondary network. Considering the transmission power constraint and energy causality, we derive the closed-form solution of the optimal transmission power for the secondary source and relays, which achieves the maximal stable throughput of the secondary network. Numerical results show the impact of different system parameters to the maximal stable throughput. In addition, compared with the traditional decode-and-forward (DF) scheme, the cooperative beamforming method achieves higher stable throughput under an high quality source-to-relay channel.