A scheduling decision aid in glass fiber manufacturing

A decision aid for scheduling production in glass fiber manufacturing industry is described. The methodology combines a linear programming (LP) optimization model with a heuristic model. The LP model determines production goals; the heuristic model then uses the LP output to incorporate system-specific constraints in developing processing sequences.     

Surface treatment for adhesive-bonded joints by excimer laser

In this work a treatment for surface preparation to improve mechanical resistance in adhesive bonding of plastic composites reinforced with fibres and metallic material, has been performed using an excimer laser. The following couplings have been selected to reproduce joints commonly used in the aerospace and automotive industry: CFC (carbon fibre composite) with CFC, CFC with Al 2024T3, Al 99% with Al 99%, GFC (glass fibre composite) with zinc-coated sheet in low carbon steel FeP01. The surfaces have been prepared using an excimer laser, adopting several values of laser parameters. The obtained surfaces have been examined by optical and scanning electron microscope: comparative measures of wetting and roughness have been performed to obtain an accurate characterisation and to select the proper finishes suitable to improve the mechanical resistance of the joints. The results obtained show that laser treatment always improves the final resistance of the joint; notable increases, and no significant surface damages have been highlighted. Better results have been obtained with the Al 99% with Al 99% joints which, with a low number of pulses treatment, have shown an increase of mechanical resistance up to the 70%.     

照亮都市空间的光纤之美

光导纤维如今已广泛应用于现代社会的各个领域,它不但适用于通信、医学、传感器等科学应用领域,缤纷的都市空间更是展现光纤之美的重要舞台。本文主要介绍了西方发达国家在城市建筑照明、室内照明、景观与公共艺术照明等诸多城市空间领域光导纤维的应用情况,旨在为丰富我国的城市空间提供一些有益的参考,并由此倡导光纤照明这样一种绿色、安全、时尚的城市照明方式。进而为其将来更好地服务于现代社会,提升城市生活品质做好理论与实践两方面的充分准备。     

基于小波多尺度分析的光纤陀螺振动误差分析与建模

针对振动环境对光纤陀螺性能的影响,对某型号的光纤陀螺进行了线振动实验并对实验结果进行了Allan方差分析。利用小波多尺度变换提取了光纤陀螺误差模型中的各误差项,分析并验证了零漂及噪声误差与Allan方差分析误差系数中的量化噪声、角度随机游走以及零偏误差与误差系数中的零偏稳定性、速率随机游走、速率斜坡之间的对应关系。随后利用RBF神经网络对小波多尺度分析提取的零偏误差建立模型并进行了补偿。仿真结果表明,本文提出的方法有效减小了振动环境下各误差项对光纤陀螺性能的影响, Allan方差分析结果中的五个误差系数均有较大下降,其中两项误差系数下降了一个数量级及以上,极大提高了光纤陀螺在振动环境下的输出精度,对光纤陀螺在振动环境下的误差研究具有重要指导意义。     

Sorption of solvents in plastics and solvent desorption and retention

The experiments reported here have studied the following systems within the temperature range 25–50°C: sorption and desorption of solvents on LDPE, OPP, PS, rigid PVC, OPA, PETP and regenerated cellulose with methanol, ethanol, n-propanol, and ethyl acetate. With reference to these, the theory presented indicates the most important aspects related to the tests, refers to identification data on similar problems and enumerates the possibilities of interaction. The application of equation 1 and the reported measuring method allows the determination of diffusion coefficients within a vapour-saturated atmosphere system. As the gravimetric method also allows the determination of solubilities (α_L, the solubility coefficient), the permeation behaviour in the Fick range is calculable from The equation used by the author can be related to other equations from the technical literature, such as for the range Q_(t)Q∞>0.4, or where for the range <0.4 The agreement can be considered as good. The D values provide a calculation base within the scope of the outlined problem definition. The taste limits for solvents in water reveal which solvents could, as residual solvents, become critical. These values—connected with sorption/desorption identification values, evaporation numbers etc. —indicate where there is a risk and those cases where sufficient drying, or even the use of more adequate solvents is essential.     

新工艺技术在合金钢棒线材生产中的应用

分析了目前我国棒线材市场优质合金钢棒线材稀缺形势下,用先进的新工艺技术改造合金钢棒线材生产线具有现实意义。这些新技术包括:连铸坯热送热装、脱头轧制和二次加热、精密轧制、低温精轧、单一孔型和"自由尺寸"轧制、直条棒材在线缓冷和刷毛刺、奥氏体不锈钢线材在线散卷固溶处理和盘卷在线环型炉固溶处理、不锈钢盘卷酸洗等技术。     

公路隧道钢筋混凝土衬砌碳化耐久性区划

为了构建公路隧道衬砌碳化耐久性的定量设计方法,对比各碳化深度计算模型与实测数据,选定衬砌碳化的最优模型;根据实测数据分析隧道环境温湿度与洞外大气关系,基于全国气象监测站的温湿度数据,建立公路隧道运营环境温湿度区划;考虑公路隧道CO₂的释放源项并参照实测数据,构建隧道运营环境CO₂体积分数的计算方法;以碳化劣化速率梯度相等为原则,对我国隧道碳化环境进行分区,结合分区推荐我国公路隧道衬砌碳化耐久性定量设计的具体方法. 研究发现：隧道环境湿度与大气湿度相当,隧道环境温度变化趋势与大气环境一致,两者均值接近. 公路隧道内部CO₂体积分数与CO体积分数呈线性关系. 云南、贵州区修建的隧道工程衬砌受环境影响较大,西藏、青海、内蒙古、黑龙江、吉林等地区的待建隧道在进行衬砌耐久性设计时可以忽略碳化影响,其余全国大面积区域隧道衬砌的碳化耐久性设计可以对应《混凝土结构耐久性设计标准》中环境作用等级中的“轻度”进行设计.     

硅烷涂层提升钢纤维-砂浆界面性能的试验研究

为了提升钢纤维-砂浆界面的黏结性能,采用9种基于硅烷的表面处理剂对钢纤维进行浸渍处理并高温固化成膜;埋置于水泥砂浆圆柱体试块中,开展单根纤维拉拔试验,获得拉拔荷载-位移曲线. 试验结果表明,采用不同的硅烷涂层对钢纤维进行表面改性,可以不同程度地改善钢纤维-砂浆界面的黏结性能;拉拔峰值荷载最高增加5.75倍,拉拔能耗最多增加2.48倍. 硅烷Z6011和Z6020及复合涂层能够较大幅度地提升界面黏结强度,主要增加钢纤维与砂浆界面的化学黏结力;硅烷Z6030和Z6040及复合涂层对界面黏结强度的提升幅度相对较小,主要增加界面滑移摩擦力. 采用扫描电子显微镜（SEM）研究界面黏结性能的提升机理,发现硅烷涂层使得界面过渡区的微观结构更致密,显著提升了钢纤维-砂浆之间的黏结性能.     

考虑剪切变形的轴心受压GFRP圆管临界荷载

为了考虑剪切变形对玻璃纤维增强复合材料（GFRP）构件屈曲荷载的影响,利用Engesser剪切变形理论,推导考虑剪切变形和初弯曲的临界荷载. 应用于GFRP圆管时,考虑材料各向异性特征对剪切系数及强度的影响. 对4根具有不同长细比的GFRP圆管试件进行轴压试验. 结果表明,GFRP圆管在截面强度估算时应综合考虑轴向纤维压缩破坏和环向基体拉伸破坏. 所推导的临界荷载计算式的结果和试验结果吻合良好.