极尖断面为折线的四极透镜磁性能研究

对传统双曲线极尖的四极透镜进行了磁性能分析。在此基础上，提出了极尖断面为折线的四极透镜结构。磁场的数值分析以及测量结果表明：该结构产生的场梯度均匀，且具有磁场集中、磁场梯度高、便于加工和安装的对称性控制等优点。该结构的四极透镜已用于ＣＹＣＩＡＥ－３０回旋加速器和ＨＩ－１３串列加速器束流输运线之中     

Integration of a Malt Drying Model into a Malt Plant Scheduling Software

Malting is a very intensive, energy-consuming process and, from the point of view of energy, green malt drying is one of the most important operations. Double-deck kiln drying, a variant of single-deck kiln drying, is the most commonly used process, but it is usually manually controlled under empirical control actions. These are the reasons why a research project was carried out based on the computer modeling of these process operations including a software tool named CIMFOOD. A knowledge-based system (KBS) allowing the entire processing-plant dynamic behavior simulation and scheduling concerning thermal energy requirements was developed.     

Silicon power MOSFET at low temperatures: A two-dimensional computer simulation study

Understanding how the structure of the unit-cell affects the cryogenic performance of a Si power Metal Oxide Semiconductor Field Effect Transistor (MOSFET) is an important step toward optimizing of the device for cryogenic operations. In this paper, numerical simulations of the Si power Double Diffused MOSFET’ (DMOS) are performed at room temperature and cryogenic temperatures. Physically based models for temperature dependent silicon properties are employed in the simulations. The performances of power DMOS’ with various unit-cell structures are compared at both room temperature and low temperatures. The effect of the cell structure on the on-resistance and breakdown voltage of the device are analyzed. The simulation results suggest that the device optimized for room temperature operation can be further optimized at cryogenic temperatures.     

Lateral space-charge effects on ballistic electron transport across graded heterojunctions

Hot electron transport across graded compound semiconductor heterojunctions has been explored using a two-dimensional formulation of the self-consistent ensemble Monte Carlo method. The Al_xGa_1-xAs/GaAs heterojunction imbedded into a vertical field effect transistor with two ohmic contacts (source, drain) and two lateral Schottky gates has been used as an example. Lateral space charges modulated by the gates are shown to control ballistic injection of electrons over the heterojunction under steady state conditions. The transient response to a gate pulse is found to be determined by carrier transit from the heavily doped source contact region into the channel. A conceptual one-dimensional section model is used to explain the Monte Carlo results.     

储层石蜡沉积预测技术研究与应用

在油田开发过程中 ,由于油藏温度、压力等条件的变化 ,高含蜡原油在近井带容易产生石蜡沉积 ,堵塞地层孔隙或裂缝 ,严重影响油田开采 ,尤其对于低渗油田 ,伤害特别严重。文中应用理想溶液理论、质量守恒和能量守恒等基本原理 ,建立更符合油田实际情况的油藏中石蜡沉积预测数学模型 ,开发一套方便实用的油藏中石蜡沉积预测软件系统FPOS1 0。在此基础上 ,应用室内实验数据和现场数据对吉林新民油田油井石蜡沉积情况进行预测和现场拟合 ,确定新民油田临界石蜡沉积半径为 2 5m ,快速、准确地为现场清防蜡措施提供理论依据。     

Calculation of fatigue limits of case-hardened specimens with consideration of mean stresses and residual stresses

 The strength of case-hardened parts under cyclic loading can be determined in an experimental manner, but this can produce a large amount of costs due to the expenditure of material and testing time. Therefore, a calculation method is developed, that strongly reduces the number of experiments. The presented model is based on Weibull's weakest-link concept and allows to compute the survival probability of a case-hardened part which is loaded close to the fatigue limit. The essential quantities in this model are the distribution of Vicker's hardness of the material, the exponents of the Weibull distribution of the volume and the surface, the residual stress state, the surface roughness and the surface oxidation depth. By integrating the survival probabilities of the surface and the volume, the survival probability of the entire specimen or part can be calculated, which allows to compute the fatigue limit. The necessary parameters have to be determined from reference specimens. The model is successfully examined by comparing experimental and calculated results of smooth and notched case-hardened specimens under alternating torsion, rotating bending, repeated tension and tension-compression. Received 20 August 2001 / Accepted 11 November 2001     

船艇电站仿真与综合管理系统

论文介绍了船艇电站模拟器的组成和实时仿真功能,着重描述了多层次的图形管理系统及其仿真界面。课题将多媒体课件制作与模拟器有机地结合,涵盖了船舶主要电气设备的控制电路,既利于实践训练又便于原理的讲解,并在实践中取得了良好的效果。     

天线方向图的复射线仿真

根据复射线理论，利用复源点高斯波束场来模拟天线的远场方向图。本文提出三种模拟方法，即主瓣匹配法，峰值匹配法和逐点匹配法，给出了多种方向图的仿真结果。数值分析和优化结果表明，复射线峰值匹配法是一种精确实用的天线方向图仿真技术。     

微波BJT超宽带低噪声放大器的设计

本文给出了一种频带覆盖达１０－１６００ＭＨｚ的微波ＢＪＴ超宽带低噪声放大器的设计方法，从微波ＢＪＴ的噪声模型出发，通过拟合５０Ω源阻抗下微波ＢＪＴ的噪声系数ＮＦ５０和Ｓ参数来提取其噪声参数，然后根据增益，噪声及驻波比要求优化设计放大器，使放大器在超宽带范围内获得平坦增益和低噪声，本文所给出的微波ＢＪＴ惨数提取及放大器优化设计方法已由实验结果所验证。