中频反应溅射SiO2膜与直流溅射ITO膜的在线联镀

多数ITO透明导电玻璃生产线在实现SiO2膜与ITO膜在线联镀时，应用SiO2靶射频溅射沉积SiO2膜工艺和ITO靶直流溅射沉积ITO膜工艺，如果SiO2膜应用硅靶反应磁控溅射工艺，存在这种工艺是否可以与ITO靶直流溅射沉积ITO膜工艺在线联用以及如何实现联用的问题。作者对现有的生产线进行了改造设计、加工，做了大量实验、质谱分析和多项测试研究，成功地实现反应溅射SiO2膜与ITO膜在线联镀，做到SiO2镀膜室的工作状态的变化基本上不影响ITO镀膜室的工艺条件。     

HTR-10燃料元件装卸系统冷态调试

10MW高温气冷实验堆（HTR－10）是一座球床堆，由燃料元件装卸系统实现燃料元件的装卸和循环，且不需要停堆，为保证HTR－10的正常运行，燃料元件装卸系统必须安全，可靠，为此，必须对燃料元件装卸系统进行周密，细致的调试试验和验证，本文介绍了燃料元件装卸系统冷调试的主要调试项目，调试方法和调试结果。     

Signed line intercept count

Elements of surfaces that bound a phase (β) in a two phase mixture (α+β) may be classified as: (a) convex (++) if both principal curvatures are positive; (b) concave (? ?) if both are negative; and (c) saddle (+ ?) if one is positive and the other negative. This classification excludes the limiting cases for which one or both of the principal curvatures is zero. The traces of these surfaces that form the boundaries of the β areas on a representative two dimensional section may also be: (a) convex (+) if the local curvature is positive; or (b) concave (?) if it is negative. Line intercepts may be tabulated separately for intersections with convex (+) and concave (?) segments of boundary. This paper presents a derivation of fundamental stereological formulae that relate these counting measurements to three-dimensional geometric properties of the structure they sample.     

高压变频器在高炉冲渣水泵上的应用

介绍了HARSVERT—A06／035型高压变频器的性能及其在新4号高炉冲渣水泵上的应用。     

同杆并架双回线基于电流突变量的综合选相

相电流差突变量选相元件在单回线故障中具有良好的选相性能，但在同杆双回线跨线故障中可能误选相。利用六序故障分量的分析方法，分析了相电流突变量在同杆双回线跨线故障中的幅值和相位特征，给出了其相位比相方程。在此基础上，提出了一种运用测量阻抗和方向元件相结合的综合选相方法，并给出了选相流程图。仿真结果表明，在双回线简单故障和跨线故障时，基于单回线单端电气量的同杆并架双回线综合选相方法具有较理想的选相性能。     

隔河岩水电厂220 kV线路保护配置及运行分析

介绍了隔河岩电厂220kV线路保护的原理设计及运行情况，以及采用了双重微机化继电保护装置后带来的优越性，简要描述了CSL-101A高频保护和RCS-931A光纤保护的应用特点。     

Mg-doped LiNi0.5Mn1.5O4 spinel for cathode materials

Lithium-ion batteries are becoming more and more important not only for portable electronic devices, but also in prevision of high power electric vehicles. In such an optic, deep studies regarding all the components of a secondary battery are in development. In this study, high voltage cathode materials have been selected. Crystals with spinel structure have a 3D vacancy pathway suitable for Li-ions transport. The material under study was LiNi_0.5Mn_1.5O₄ doped with magnesium replacing the nickel. Various samples were synthesized via three different routes: a solid-state method, a modified sol–gel method and a xerogel method. The structure and morphology of the powders were analyzed with HRTEM and XRD. Electrochemical tests were also performed. A wide range of particle sizes (from micro to nanosize) was the result of the different synthesis routes. Unfortunately pure materials were not always obtained. The electrochemical tests showed improvement of the material's cyclability, by reducing the particle size. The electrochemical tests further confirmed the existence of a Li_1+dMn_2−dO₄ impurity. The results are quite promising, however, further improvement of the purity of the electrode composition are needed.     

输气干线单个分输站站址最优化研究

输气干线分输站站址规划设计合理与否，直接影响到分输站至各城市门站之间输气管线总投资和未来管网系统的发展。为此,着重讨论并建立了以分输站站址、各城市门站与分输站之间管道直径、壁厚、分输站压力为设计变量，以各城市门站与分输站之间管道投资最小为目标函数的分输站站址优化数学模型。根据模型特点，采用混合离散变量复合形法与数据库技术相结合来求解分输站站址。以此站址为参考点，结合现场勘察，在参考点附近沿输气干线预选多个分输站站址，并对影响分输站建设和管理的环境因素用多目标模糊评价方法进行综合评价，以评价效果好的站址为最优分输站站址。用算例说明了分输站站址优化结果不仅与工艺参数变化有关，且与分输站所处环境因素有关。提出还应深入研究输气干线中具有多个分输站的站址优化问题。     

无线随钻测量技术的应用现状与发展趋势

目前,无线随钻测量技术是石油工程技术发展的一个主要方向。详细介绍了无线随钻测量仪器的传输方式、国内外无线随钻测量技术的主要进展和应用现状,指出了国内外无线随钻测量仪器的优缺点和应用范围,分析了无线随钻测量技术的发展趋势,并提出我国应在借鉴国外先进的无线随钻测量技术的基础上,研制具有自主知识产权的无线随钻测量仪器,以加快我国无线随钻测量技术的发展,缩短与国际先进水平的差距。     

预防HIV传播的药物

药物预防HIV传播是人类战胜HIV的重要手段。现将预防HIV感染药的研发现状，抗HIV药在预防母婴传播，暴露前后预防的研发和应用动态作一综述。